Drivers (ULDs) and the base if_cxgbe driver.
Track the per-adapter activation of ULDs in a new "active_ulds" field.
This was done pretty arbitrarily before this change -- via TOM_INIT_DONE
in adapter->flags for TOM, and the (1 << MAX_NPORTS) bit in
adapter->offload_map for iWARP.
iWARP and hw-accelerated iSCSI rely on the TOE (supported by the TOM
ULD). The rules are:
a) If the iWARP and/or iSCSI ULDs are available when TOE is enabled then
iWARP and/or iSCSI are enabled too.
b) When the iWARP and iSCSI modules are loaded they go looking for
adapters with TOE enabled and enable themselves on that adapter.
c) You cannot deactivate or unload the TOM module from underneath iWARP
or iSCSI. Any such attempt will fail with EBUSY.
MFC after: 2 weeks
This is a sync against iwn(4) and openbsd.
- Add power management support;
- Add background scanning support;
- Fix few LORs;
- Handle rfkill switch state changes properly;
- Fix recovering after firmware failure;
- Add more error checking;
- Cleanup & disable by default debug output;
- Update macroses names;
- Other various fixes;
- Add IBSS support:
- don't set data_ntries field for management frames;
- Add AHDEMO support:
- fix padding;
- Sync eeprom functions;
- Use CMD_RXON_ASSOC where possible;
- Enable HW CCMP encryption/decryption for pairwise keys;
- Fix filter flags for CMD_RXON.
Tested (by submitter) - iwn 3945 NIC. I have one somewhere; I'll
validate this later on and revert it if it's a problem.
Thanks!
PR: 197143
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
particular, updates to the watchdog should no longer sleep.
- Add a new IPMI_IO_LOCK for low-level I/O access. Use this for
kcs_polled_request() and smic_polled_request().
- Add a new backend callback "ipmi_driver_request" to handle a driver
request. The new callback performs the request sychronously for KCS
and SMIC. SSIF still defers the work to the worker thread since the
worker thread sleeps during request processing anyway.
- Allocate driver requests on the stack rather than using malloc().
Differential Revision: https://reviews.freebsd.org/D1723
Tested by: scottl
MFC after: 2 weeks
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
a dependency. This ensures "ifconfig cxl<n> ..." does the right thing
even when it's run with no driver loaded.
if_cxl.ko is the tiniest module in /boot/kernel.
MFC after: 2 weeks
Lock name should include interface name.
Tx queue and event queue lock name should include queue number.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Allow access to statistics data not only from sysctl handlers.
Submitted by: Boris Misenov <Boris.Misenov at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
initiator iSCSI offload. Pass maximum data segment size supported by
chosen offload module to iscsid(8), and make iscsid(8) not try to negotiate
anything larger than that.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
ISR that are normally clear. RST is one, though in some overflow cases
it can be set. RDC is only set when a remote DMA is finished from the
memory mapped memory to the transmit rings, which we poll fore in the
code with ED_LOCK around the operation that would set it.
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.
Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by: royger (eariler version)
MFC after: 1 month
we also know that it "can't fail" given the single-threaded nature of
device enumeration. Go ahead and check it just in case, but add a
comment.
CID: 1009393
Sponsored by: Netflix, Inc
Fixed upstream in Linux commit 7ff0ebcc1e30e3216c8c62ee71f59ac830b10364
Differential Revision: https://reviews.freebsd.org/D1762
Reviewed by: hselasky, kib
Sponsored by: The FreeBSD Foundation
allocations if only one element should be allocated per page
cache. Make one allocation per element compile time configurable. Fix
a comment while at it.
Suggested by: ian @
MFC after: 1 week
that we should use a normal-TRB if there are more TRBs extending the
data-stage TRB. Add a dedicated state bit to the internal USB transfer
flags to handle this case.
Reported by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
MFC after: 1 week
In 10.1-RELEASE the default number of MSI vectors used was changed from one
to as many vectors as the HW supports.
This change resulted in an ahci timeouts regression when running on AMD
SB7x0/SB8x0/SB9x0 hardware, so its now limited to 1 MSI by default using
this new quirk.
MFC after: 2 weeks
Sponsored by: Multiplay
controller.
The gpiobus is responsible to keep track of the used pins and serialize
the access to pins.
Some of these features are important to devices that do not descend
directly from gpiobus and as such cannot make use of its features (one
classic example is gpioc that is attached to the GPIO controller and could
not, until now, make use of the gpiobus locking).
this codepath.)
(1<<30) is documented as BLM_PCH_OVERRIDE_ENABLE, which the current
i915 driver in Linux only sets for broadwell chips.
This fixes the backlight control on the Lenovo X230.
Approved by: kib
Obtained from: Linux 7aa1e7f06d6ea1bce3b27630d50769d13da28b1a
