interface. This augments the default to an appropriate interface
code.
# These programs should be merged into ifconfig, ala NetBSD, but that's
# a fight for another day.
Idea from: OpenBSD
$file not be what you expect, particularly should $file turn out to be
"+REQUIRES" since ">+" is a valid open mode.
This isn't currently a problem since $file is constructed safely but it removes the potential of future problems.
Pointed out by Anton Berezin.
header before trying to process them. Without this sanity check,
rwhod can attempt to byte-swap all of memory when a short packet
is received, and so dies with a SIGBUS.
While I'm here, change two other syslog messages to be more
informative: use dotted quad rather than hex notation for IP
addresses, and include the source IP in the 'bad from port' message.
PR: bin/14844
Reviewed by: dwmalone
o strcpy() -> strlcpy()
o sprintf() -> snprintf()
o mktemp() -> mkstemp()
o use err() instead of errx() in out_of_memory() function since
errno will probably be set
Submitted by: jedgar
- IP addresses are verified as being correct dotted quad format.
- Netmasks are verified as being in correct dotted quad or 0x* format,
and being consecutive 1 bits followed by consecutive 0 bits.
- The gateway is verified as being correct dotted quad format and
being reachable through the configured IP address and netmask.
no as a default. Sysinstall should be both less dangerous and less
annoying as a result of this change, though that's just my opinion
(since they're the defaults which annoy ME the least :).
- Read the database from /usr/share/misc (or wherever else we're pointed)
rather than compiling it in.
- Decode the class/subclass fields if requested.
- Print things in a slightly longer but more readable format.
make sure there is exactly one prototype for each function,
use K&R style definitions everywhere to match dominant style,
make flag_signal take an int to avoid problems if we have
ANSI prototypes and K&R definitions.
files. Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive. Some were
misspellings of "-I${.CURDIR}" as "-I.".
/usr/obj hardwired in the code, now you can override it
with a command line option or MAKEOBJDIRPREFIX env. variable.
The above is useful to build picobsd-specific objects in some other
place than /usr/obj
While at it, fix documentation and change a few sprintf -> snprintf.
ppp descriptor and signals the terminal thread when there's something
to read on that descriptor.
This means that the main loop doesn't have to alarm() itself into
dropping out of el_gets() frequently to check the descriptor. This
dropping out was disturbing syscons (via ioctl()s from libedit) enough
to reset the screensaver timeout every .5 of a second.
PR: 20345
root's groups' permissions were being used, so a user could read up to
16 (excluding initial whitespace) bytes of e.g. a wheel-accessible file.
Also, don't allow blocking on the opening of ~/.fakeid, so replace a fopen()
with open() and fdopen(). I knew I'd be going to hell for using C file
streams instead of POSIX syscalls...
for your /usr/obj/path/to/my/files path to the kernel, then weird
things happened. make buildkernel would fail because config was
dumping core or generating bad file names (depending on the lenght of
the path).
While I was here, also use strlcpy, strlcat and snprintf (or asprintf)
as necessary. Minor format policing for the snprintf calls as well.
Address this by using getpwnam(), thus killing several birds with
the same stone. My fix is slightly more aggressive than the
originators. :)
PR: misc/22278
of the data structures to include new members that weren't defined in the
manual I have.
I opted to use Doug Ambrisko's WEP patches since David Cornejo's patches
did not include the necessary changes to ancontrol(8) to actually enable
and use WEP.
NOTE: I don't currently have access to an Aironet card, so I can't test
any of this. Everything compiles and close scrutiny doesn't reveal any
obvious problems, but Murphy's Law applies. This means I will probably
leave these changes in -current for a bit longer than usual until I'm
sure they work right.
done, so the correct directory is being checked. The mkstemp() call
is meant to create a temp file for stderrs when running filters. This
update also fixes log-file processing for remote (rm=) queues which
specify an input filter (if=). Before, filter-errs were thrown away.
Now they'll be copied to the queue's logfile (lf=).
Reviewed by: (a little) audit@FreeBSD.ORG & freebsd-print@bostonradio.org
This is based on wicontrol. Duncan updated it for raylan. I've
updated this to the latest wicontrol. In addition, to make it kinda
compatible with ifconfig, you can give the interface name w/o the -i.
Submitted by: duncan barclay
This allows build flags to be specified for a particular program from
within the crunch.conf file, eg:
prog ppp
special ppp buildopts -DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM
This adds '-DNOKLDLOAD -DNOINET6 -DNONAT -DNOATM' to make targets
related to ppp when determining which object files to build and
when calculating dependencies and building the targets.
* Adjust a little whitespace
* Make the distrib-dirs/mtree on DESTDIR conditional on user
actually specifying a DESTDIR. This seemed like a safe
way to get the right directories and permissions in the
installed tree since 'make installworld' does the same
thing, but in practice too many people have custom hacks
that we should leave unmolested. Still need to find a way
to deal with 'install -d' and permissions on nonexistent
directories in the middle of the path, but this is at
least no worse that it was before.
PR: bin/22661
- acpiconf Replace include files from old acpi driver to acpica driver.
New sleep type `4b' had been added (S4BIOS) for `-s' option.
Of course this has no effect because driver doesn't
support it for now :-)
- acpidump All needed structs in sys/dev/acpi/*.h had been merged
into local header file. No changes on its usage.
MPPE session keys correctly.
I'm a bit dubious about this code. It seems that the session keys
are initialised differently based on whether you're the client or
the server. One side is the server if it issues the first challenge,
but of course you can issue a challenge from both sides.... at the
same time. Sounds like another wonderful M$ assumption...
Ppp can now talk to itself correctly using encryption.
Problem solved by: Ustimenko Semen <semen@iclub.nsu.ru>
Hair torn out by: me
program to read any file which is a valid crontab file.
The fix is based on that used in NetBSD and OpenBSD - we keep the
file open while the user is editing it. This means that files must
be edited in place. Cron attempts to warn you if your editor does
not do this. The fact that the file must be edited in place is also
noted in the man page.
This patch has been confirmed to work by atleast one person on
-security and has been tested locally.
Obtained from: OpenBSD
a per program basis.
This has now been added in the following way:
* Harness the make header file that's specified with the -h argument:
- Allow the user to define $(OPTS) to specify make arguments that should
be added to every program target.
- Allow the user to define $(prog_OPTS) to specify make arguments that
should just be added to the build of 'prog'.
* Make sure that $(OPTS) and $(prog_OPTS) are defined when looking through
each program's make file to determine which object files to crunch.
* When building the crunchgen makefile add $(OPTS) and $(prog_OPTS)
to the depend and build rules for $(prog_OBJS).
try to move the file from the source to the destination (spool) directory.
If that succeeds, much time and disk-space will be saved by doing that
instead of copying the entire file only to remove the original. This
could be a big win on machines doing samba-service or CAP-based printing.
Note that this is about the fourth or fifth iteration of the patch, after
trying to address all possible security implications of the change.
PR: 16124
Reviewed by: freebsd-current or freebsd-hackers (some time ago)
in lpd. Stat.recv is useful on a printserver, as something of a network
performance-monitoring tool. Stat.send is a minimal accounting record of
sorts for jobs going to tcp/ip based printers.
Reviewed by: freebsd-print@bostonradio.org
it again and again, practically begging the Bad Man to insert his symlink
underneath it and send us down the path to oblivion.
Noticed by: David Lary <dlary@secureworks.net>
* Use a sub-section (Ss) instead of a section (Sh) for
"Sysctl MIB Entries".
* Use a tagged list (Bl, El and It) instead of sub-sections (Ss) for
the actual MIB entries.
* Mark paths up as such (Pa).
* Mark defined values up as such (Dv).
of files auto-installed during an upgrade from a really old system
can get quite long, and it's piped to the PAGER already, print
that first, then print any of the 4 two-line messages that might
apply.
which have long names. Instead of just listing '...', try to list some
reasonable subset of the name (with a "..." to indicate something missing).
Reviewed by: freebsd-print@bostonradio.org (only a little review)
standard or serial. This change needs to be done to the entire system that
depends on this. This way we don't have some code using OnVTY checks
and other doing
strcmp(variable_get(VAR_FIXIT_TTY), "standard") == 0
checks. Also we need to set VAR_FIXIT_TTY to "serial" if we come up on
a serial console.
Also fixed a dialog problem in that dialog was used when dialog was
disabled causing some troubles such as not letting the cursor keys
work when exiting the fixit mode on media (ie. not the fixit shell but
for example fixit on a floppy).
Submitted by: Doug Ambrisko <ambrisko@whistle.com>
PR: 22352
process of making the script more cross platform friendly.
* Add -i option to automatically install files that do not exist
on the system already.
* Add the ability to specify DESTDIR.
* Allow the user to specify scripts to run right before the
comparison starts, and when mm is done. This will
allow the user to specify customized local behavior, and
implement features such as automatically deleting files.
* Document the above changes in the man page.
* Switch to using 'ident' for the CVS Id comparison, which
should help with portability, and makes it faster.
* Reorder, and in one case fix some code by doing things in
ways that make more sense.
* Check to see if the file exists on the system before doing
the comparisons. This saves CPU cycles, and streamlines
the auto-install process.
I used bits and pieces of suggestions and patches from various
people, ultimately too numerous to name. Which is not to say
that they were not both appreciated, and helpful in achieving
the ultimate result.
* More whitespace
* Change read -p to echo -n/read to help support portability
* Genericize an informational message regarding /.cshrc and /.profile
for the same reason
- avoid to use freed (by freeifaddrs) data
- 1st try getifaddrs, then try SIOCGIFMTU as the last resort
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME Project
mimics that of tcpdump in that for normal builds, sendmail will only be
built once. For 'make release', it is built once for the bin dist and
once for the crypto dist. This method also removes the need for two separate
Makefiles (which could become out of sync).
Suggested by: bde
Assisted by: kris
a path of the port from which package has been created within FreeBSD Ports
Collection and will be used to improve pkg_version(1) and similar tools.
Reviewed by: ports@FreeBSD.org, jkh
Approved by: jkh
concerning where they're taking place.
Switch from [r]index() to str[r]chr() functions, which are more ISO
compliant.
Prompted by: Edward Welbourne <eddy@vortigen.demon.co.uk>
