that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
libexec/ftp-proxy - ftp proxy for pf
sbin/pfctl - equivalent to sbin/ipf
sbin/pflogd - deamon logging packets via if_pflog in pcap format
usr.sbin/authpf - authentification shell to modify pf rulesets
Bring along some altq headers used to satisfy pfctl/authpf compile. This
helps to keep the diff down and will make it easy to have a altq-patchset
use the full powers of pf.
Also make sure that the pf headers are installed.
This does not link anything to the build. There will be a NO_PF switch for
make.conf once pf userland is linked.
Approved by: bms(mentor)
While I'm here, sync the usage() synopsis with the manual page synopsis:
make the [-i | -s] explicit and sort the options alphabetically.
Reminded by: ru
MFC after: 3 days
ever since rev. 1.1 of bootpd.c.
While I'm here, rearrange the synopsis a bit: sort the options and
clarify that -i and -s are mutually exclusive.
Reported by: Atanas Buchvarov <nasko@nove.bg>
MFC after: 3 days
says they may not modify existing files through FTP.
Renaming a file is effectively a way to modify it.
For instance, if a malicious party is unable to delete or overwrite
a sensitive file, they can nevertheless rename it to a hidden name
and then upload a troyan horse under the guise of the old file name.
contents in reply to a RETR command. Such clients consider RETR
as a way to tell a file from a directory. Mozilla is an example.
PR: bin/62232
Submitted by: Bob Finch <bob+freebsd <at> nas <dot> com>
MFC after: 1 week
- Unify the conditional assignments section so that architectural
exclusions come first, then options and !options, sorted by the
option name, also in directory order, then architecture specific
sections, sorted by the architecture name, with i386 being a
traditional exception.
Prodded by: bde
However, the code did allow deletion of files. Make deleting require the -m
flag, too.
PR: bin/60809
Submitted by: Alexander Melkov <melkov@comptek.ru>
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
(libmap available) and 1 for failure. Assign this return to the
global 'libmap_disable' variable in rtld.c.
This totally prevents any libmap functions from being called after
lm_init() if no config file is present.
Previously, there were two copies of telnet; a non-crypto version
that lived in the usual places, and a crypto version that lived in
crypto/telnet/. The latter was built in a broken manner somewhat akin
to other "contribified" sources. This meant that there were 4 telnets
competing with each other at build time - KerberosIV, Kerberos5,
plain-old-secure and base. KerberosIV is no longer in the running, but
the other three took it in turns to jump all over each other during a
"make buildworld".
As the crypto issue has been clarified, and crypto _calls_ are not
a problem, crypto/telnet has been repo-copied to contrib/telnet,
and with this commit, all telnets are now "contribified". The contrib
path was chosen to not destroy history in the repository, and differs
from other contrib/ entries in that it may be worked on as "normal"
BSD code. There is no dangerous crypto in these sources, only a
very weak system less strong than enigma(1).
Kerberos5 telnet and Secure telnet are now selected by using the usual
macros in /etc/make.conf, and the build process is unsurprising and
less treacherous.
Rationale:
SIGURG is configured by ftpd to interrupt system calls, which is useful
during data transfers. However, SIGURG could interrupt I/O on the
control channel as well, which was mistaken for the end of the session.
A practical example could be aborting the download of a tiny file,
when the abort sequence reached ftpd after ftpd had passed the file
data to the system and returned to its command loop.
Reported by: ceri
MFC after: 1 week
- always check the return value from getc(3) for EOF;
- if the attempt to read the TELNET command byte has
returned EOF, exit from the loop instead of using
the EOF value as a normal character.
MFC after: 1 week
rtld. When _DYNAMIC is referenced normally from C the global offset
table is used implicitly, but newer versions of binutils don't initialize
it statically in the binary, so this doesn't work until rtld is relocated,
which _DYNAMIC is needed for... So, as on other systems with the same
problem, we disassemble a call instruction to _DYNAMIC in order to get
its address.
Setting the LD_DUMP_REL_PRE or LD_DUMP_REL_POST environment variables
cause rtld-elf to output a table of all relocations.
This is useful for debugging.
as the source of defaults for terminal device parameters.
- Do duplucate code reduction and simplification enabled by
the above.
Reviewed by: green
MFC after: 1 month
A PPP login program is started _automatically_ (i.e., without
human intervention) even with the "pl" capability unset, as soon
as a PPP frame is detected. But with "pl" set, a PPP login program
is started independently of the result of PPP detection (which is
rendered unnecessary then,) i.e. _unconditionally_.
don't reveal the info in reply to the SYST command.
Get rid of using the "unix" macro at the same time. It was a rather
poor way to check if the system was Unix since there were quite a
few Unix clones out there whose cc didn't define "unix" (e.g.,
NetBSD.) It was also sensitive to the C standard used, which caused
unnecessary trouble: With -std=c99, it should have been "__unix__",
and so on.
PR: bin/50690
Submitted by: Alex Semenyaka <alexs _at_ snark.ratmir.ru>
MFC after: 1 week
information could only be gleaned from the the tty descriptor itself
was neglected, so never did the tty's default settings get copied from
the kernel. Specifically, this caused all manner of ctrl-keys to not
work. Fix this by calling dogettytab() in all the proper places, and
retrieving the terminfo temporarily in dogettytab().
- Use .Va, not .Em, to mark up variable-like identifiers
(capability and database entry names.)
- Stop abusing .Tn (trademark) to emphasize general phrases.
- Spot unmarked capability references.
- Add a missing line break.
Discussed with: ru
MFC after: 1 week
capabilities:
- Mark up capability identifiers.
- Don't squeeze much text into the capability table given the options
will be described below in detail.
- Keep the capability table sorted.
- Use a consistent term for a PPP login program.
MFC after: 1 week
- Initialize "rval", which would be used uninitialized
if al or pl options were set.
- Don't pass an empty string to login(1) as a user name
(this could be triggered by entering a name and then killing it
with backspace or ^U.)
- Don't loop endlessly if the al option specifies a bogus (i.e.,
not alphanumeric) auto-login name.
- Don't pass a bogus user name to login(1) if a good name were
entered and then killed with ^U.
- Exit with status 0, not 1, on receiving an EOF character,
since it's not a error condition.
MFC after: 1 week
