Commit Graph

196 Commits

Author SHA1 Message Date
Brian Somers
b4b280abef o Behave correctly when short sequence numbers are denied.
o Determine if one seq is less than the other correctly,
  given the point at which they wrap (again).
1998-05-06 23:49:48 +00:00
Brian Somers
84917b87ba Log link name changes correctly. 1998-05-06 23:49:33 +00:00
Brian Somers
1bc9b5ba84 o Make sure we don't dereference NULL when we've lost all our links.
o Use srandomdev() for __FreeBSD__ >= 2, not just >2.
o Use srandom((time(NULL)^getpid())+random()), random() when we
  haven't got srandomdev().
1998-05-06 18:50:12 +00:00
Brian Somers
078c562e54 o Don't enter phase TERMINATE in the LCP TLD, leave it exclusively
for the last NCP TLF.
o Move tun reading from the main loop into the bundle descriptor
  handling routines.
o Cosmetic: Add a few `const's and make some diagnostics clearer.
1998-05-06 18:49:45 +00:00
Brian Somers
183df580c7 Don't allow duplicate sticky routes. 1998-05-06 00:38:55 +00:00
Brian Somers
c57a7a001f Mention sticky routes.
Also, complete the comment about the dial command in the multilink
example.
Suggested by: Martin Cracauer <cracauer@cons.org>
1998-05-05 23:31:45 +00:00
Brian Somers
610b185f37 Create `struct sticky_route'.
Any `add' or `delete' command that uses MYADDR or HISADDR
will be added to the sticky route list (show ipcp).  When
MYADDR or HISADDR change due to IPCP negotiations, and if
`sroutes' is enabled (the default), all sticky route
entries are updated in the routing table.

The end result is that `add default hisaddr' will ``stick'',
as will ``add myaddr 255.255.255.255 127.0.0.1'' and
``add 1.2.3.4 255.255.255.0 hisaddr''.
1998-05-05 23:30:13 +00:00
Brian Somers
eeab6bf510 o Use a tun speed of 115200 for each network link.
o Display the link weight in `show links', and only
  show throughput for open links.
1998-05-05 03:01:32 +00:00
Brian Somers
1bcced10ad Allow a 1000 fragment sliding window when placing a new fragment
in our inbound multilnk queue.  This fixes wrapping problems when
something arrives out-of-sequence.
1998-05-04 21:42:41 +00:00
Brian Somers
59acc91778 Keep DPADD and LDADD consistent. 1998-05-04 03:01:34 +00:00
Brian Somers
147613eadf o Increment expected MP fragment numbers correctly,
according to SHORTSEQ negotiation.
o Don't forget to attach incoming fragments with a
  number greater than everything else in the queue
  (rather than leaking memory).
o Output the link name with the ``other'' hdlc
  diagnostic message.
o Correct a VJ diagnostic (`COMPPROTO', not `proto').
1998-05-04 03:00:09 +00:00
Brian Somers
9c53a7b1c5 o Display current link throughput in `show links' (assuming
throughput measurement is enabled).
o Load balance the links based on weight *and* on a round-robin
  basis.  This makes things fairly even on an output basis.  We
  don't try to allow for the peer sending all his data down one
  link (and try to send ours back up the other).
o Show the number of pending input buffers that can't be processed
  in ``show mp''.
o Fix a typo in the man page.
1998-05-03 22:13:14 +00:00
Brian Somers
6e7cdde1a2 o Mention our link name with timed HDLC error reports.
o Switch off our carrier detect timer if we don't have
  CD after logging in.
o Maintain our CD timer after a link transfer.
1998-05-03 11:24:16 +00:00
Brian Somers
96c9bb21aa o Transfer file descriptors using {send,recv}msg & SCM_RIGHTS,
using the scatter/gather array to transfer the link
  information.  The whole link is now passed in one message.

This is far better than the two `/bin/cat' processes per additional
link :-)  I remember years ago thinking that file descriptor
transferral would be a really amazing facility !

Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
         and: Eivind Eklund <eivind@yes.no>
1998-05-02 21:57:50 +00:00
Brian Somers
b1ac9332fd o Mention the ``timer'' log in the man page.
o Remove an escaped mention of ``carrier'' logging.
o Alphabeticalise timer logging in the log list.
1998-05-01 22:39:38 +00:00
Brian Somers
c0fd19f856 Pathnames.h is no longer required. 1998-05-01 19:27:15 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
40f1c018aa Remove pppmpipe - it's not required now that MP ppp uses `at'. 1998-05-01 19:22:49 +00:00
Brian Somers
b762af4f95 o Explicitly set the close-on-exec flag of descriptor 3 before
exec()ing.  Tidy up file dups in general prior to exec().
  This prevents our tun device (fd 3) from staying open (and
  configured) despite handing off all it's links and exiting
  (because ``cat'' holds it open).
o Don't bother SIG_DFL'ing signals before exec() as they're
  already trapped with specific handlers and will be handled
  correctly by the exec.
o Use values from paths.h for "/dev/" and "/dev/tty".
o Don't assert() in physical.c.
1998-05-01 19:22:23 +00:00
Brian Somers
47723d29e5 o Use two `cat' processes to connect the modem to an
already-running ppp.
  Suggested by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
o Use _PATH_DEVNULL rather than "/dev/null"
o Be more paranoid about nuking running timers when
  transferring links.
1998-05-01 19:20:09 +00:00
Brian Somers
b10a02ddff Give a multilink example, and fix some minor mistakes. 1998-04-30 23:54:39 +00:00
Brian Somers
6f38457323 o Create a new `timer'' log level. This lets us `set
log debug'' without filling our filesystem/screen with
  junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
  connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions.  If
  LayerUp() fails, the FSM does an immediate FsmDown() without
  calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
  chat programs so that our documented ability to communicate with
  /dev/tty via that descriptor works.  Also document it as
  descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
  This allows `struct datalink's to flatten themselves, pass
  through a pipe (read: the eye of a needle !) and come alive
  at the other end.  The donator then fork()s & exec()s pppmpipe,
  ``passing'' the connection to another ppp instance.

   *** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still.  It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....
1998-04-30 23:53:56 +00:00
Brian Somers
9c281ab21b Don't forget to set up our ppp.secret IP numbers & label
in non-MP mode.
1998-04-30 23:52:53 +00:00
Brian Somers
97fec20198 Create ``pppmpipe''.
This is a *very* small program that acts as a pipe between
stdin & stdout.
1998-04-30 23:51:51 +00:00
Brian Somers
1fa665f5b3 o Add the link name to modem diagnostics.
o Create struct mpserver as part of struct mp.
  mpserver creates a unix-domain socket based on the
  peers auth name and endpoint discriminator.  If it
  already exists, ppp will ``pass the link'' over to
  the owner of the socket, joining it into the bundle
  of another ppp invocation, otherwise ppp waits for
  other invocations to pass it links through this
  socket.
  The final piece of code will be the code that flattens
  our datalink info and passes it down this channel
  (not yet implemented).
1998-04-28 01:25:46 +00:00
Brian Somers
107d62e7ac o Don't limit our tun device number to 256. As long as there's
another /dev/ entry, keep trying to open them.
o Don't allow ``open ccp'' if lcp isn't open.
1998-04-27 01:40:38 +00:00
Brian Somers
e43ebac1c2 Make gcc-2.8.1 build ppp cleanly.
Support OpenBSD again.
1998-04-25 10:49:52 +00:00
Brian Somers
9592529e9d Use the link name for modem throughput logging. 1998-04-25 00:09:28 +00:00
Brian Somers
184d1da22a Show our link name when we fail to mp_Up(). 1998-04-25 00:09:22 +00:00
Brian Somers
50abd4c820 Make ``show ipcp'' prettier and remove a few redundant includes. 1998-04-25 00:09:14 +00:00
Brian Somers
93cc258625 Remove carrier logging 1998-04-24 19:16:23 +00:00
Brian Somers
259a619199 Choose the correct IP number in ``set enddisc {ip,mac}''. 1998-04-24 19:16:20 +00:00
Brian Somers
643f49047e o Defer setting up pap/chap based IP numbers & labels until after
we've determined if we're going to join another ppp invocation.
o Make ``show link'' show all link details, and ``show links''
  just give a list of links and their current status.
o Show our current label in ``show bundle''.
o Allow link cloning and removal as soon as our MRRU is set.
o Make ``show lcp'' require context as nothing will ever change
  in our MP LCP (it's auto-configured as per rfc1990).
o Initialise our LQM owner in hdlc_Init().
o Store our endpoint discriminator and authentication name at both
  the datalink and multilink level and compare them when we've
  finished AUTHENTICATE phase and before entering NETWORK phase.
  If they don't match, close the link again.
  Display the information in the appropriate ``show'' command.
o Initialise datalink::phone and datalink::fsmp.object properly
  when we're cloning the link.
o Show which link we're passing LQRs on in our diagnostics.
o Reject endpoint discriminator REQs at the logical multilink
  level.
o Remove the rest of our CARRIER and LINK logging setup.
1998-04-24 19:16:15 +00:00
Brian Somers
d47dceb8ab o Remove LINK level logging.
o change the default link name to ``deflink'' rather
  than ``default''.
o Prepend the link name to CCP and LCP FSM diagnostics.
o Protect against 0 length options in CCP and IPCP REQ
  interpreters (already done for LCP).
o Allow optional context for the `show' command.
o Use MPs link when interpreting commands if the multilink
  mrru is configured rather than when multilink is active.
  This means that once we've ``set mrru xxx'', we then need
  to ``link deflink show ccp'' etc if we want to do link-level
  stuff (based on the command requiring optional or manditory
  context).
o Use the ifconfig'd interface address in `set enddisc {ip,mac}'
  if it's there, otherwise the configuration file value.
1998-04-24 19:15:48 +00:00
Brian Somers
ed32233ca5 Output the correct protocol id from the physical link-level CCP
layer when we're in multilink mode.
1998-04-24 19:15:26 +00:00
Brian Somers
086760227f Create #defines for all endpoint discriptor classes,
and allow `set enddisc mac'.
1998-04-23 23:50:40 +00:00
Brian Somers
673903ec42 o Initialise MP correctly depending on if we're the
first link in mp_Up().
o Bring MP and its CCP down when we enter phase TERMINATE,
  and ditch everything in the incoming packet queue.
o Enable MRRU negotiation.  Now, we can multilink
  mode, but only with one physical link.
o Close the link if the peer PROTO REJs PROTO_MP.
o Prepend our protocol before passing a packet to
  struct mp for fragmentation.
o Log info messages to DEBUG, not ERROR (oops).
o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
Brian Somers
6e3ef61465 Get the alignment right in ``show mp''. 1998-04-23 18:58:04 +00:00
Brian Somers
ce828a6ecc o Add ipcp_SetLink() for attaching IPCP to the correct link, and
call it after link authentication.
o Pretty print our bundle MTU.
o Correct MP header encoding and decoding (should be network byte order).
o Add some debug diagnostics so that we can see MP fragment sending and
  re-assembly.
1998-04-23 18:56:21 +00:00
Brian Somers
789de69642 Mention how to set an ACCMAP for ^Q & ^S. 1998-04-23 18:56:00 +00:00
Brian Somers
dbf60d74f8 o Don't go multilink if the peer hasn't asked for it
o Don't go multilink if the peer hasn't agreed
o When negotiating multilink, don't try to push the peers
  MRU up according to our `set mtu' setting.  Instead, accept
  whatever MRU they want and push their MRRU up instead.
o When *not* negotiating multilink, REJ short sequence number
  REQs.
1998-04-23 18:55:50 +00:00
Brian Somers
49052c9523 Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply
multilink ('cos I've seen my ISP REQ it without multilink).

Setting MRRU is ifdef'd out until it's debugged and we can
merge -direct links with other running programs.

Fix MTU setting.
1998-04-23 03:23:03 +00:00
Brian Somers
fdf6117177 o Remove some unused #includes.
o Make sure our ipcp throughput timer is stopped before being nuked
  with a memset.
o Don't initialise struct async & struct hdlc twice in modem_Create().
o Clarify some comments.
1998-04-21 01:02:32 +00:00
Brian Somers
a7a615faaa Indent Auth name properly. 1998-04-20 00:21:24 +00:00
Brian Somers
f45c790690 Do away with the static struct timeoutArg. Move the
struct pppTimer from struct link to struct physical
for doing carrier checking.
1998-04-20 00:20:41 +00:00
Brian Somers
fe3125a0c3 o Use __attribute__ (#ifdef __GNUC__) to type-check
LogPrintf() and prompt_Printf(), and fix the bits
  identified as being wrong as a result.
1998-04-19 23:09:03 +00:00
Brian Somers
c02f378706 Add "ABORT NO\\sCARRIER" to ``set login'' examples. 1998-04-19 18:52:03 +00:00
Brian Somers
d6c2ac49e3 Show examples of how to use various new features. 1998-04-19 15:25:21 +00:00
Brian Somers
e3c70ce931 Tidy up the use of struct pppTimer. 1998-04-19 15:24:50 +00:00
Brian Somers
1ad3093b3f Correct the args passed to `shell'. 1998-04-19 07:22:31 +00:00