bugfix-only release, with no new features.
Please note that from 3.5.0 onwards, clang and llvm require C++11
support to build; see UPDATING for more information.
breakpoint. The value doesn't need to be adjusted as it is already
correctly returned from the kernel.
This allows lldb to set breakpoints, and stop on them, however more work
is needed, for example single stepping fails to stop.
Discussed with: emaste
Change this to DWARF2, in the simplest way possible. (Upstream, this
was fixed in clang trunk r250173, but this was done along with a lot of
shuffling around of debug option handling, so it cannot be applied
as-is.)
Noticed by: des
MFC after: 3 days
Refactor library decision for -fopenmp support from Darwin into a
function for sharing with other platforms.
Pull in r248424 from upstream clang trunk (by Jörg Sonnenberger):
Push OpenMP linker flags after linker input on Darwin. Don't add any
libraries if -nostdlib is specified. Test.
Pull in r248426 from upstream clang trunk (by Jörg Sonnenberger):
Support linking against OpenMP runtime on NetBSD.
Pull in r250657 from upstream clang trunk (by Dimitry Andric):
Support linking against OpenMP runtime on FreeBSD.
[x86] Fix wrong lowering of vsetcc nodes (PR25080).
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
This should fix the "Cannot emit physreg copy instruction" errors when
compiling contrib/wpa/src/common/ieee802_11_common.c, and CPUTYPE is set
to a CPU supporting AVX (e.g. sandybridge, ivybridge).
[SLP] Vectorize for all-constant entries.
This should fix libc++'s iostream initialization SIGBUSing on amd64,
whenever the global cout symbol is not aligned to 16 bytes.
Some further explanation: libc++'s iostream.cpp contains the definitions
of std::cout, std::cerr and so on. These global objects are effectively
declared with an alignment of 8 bytes. When an executable is linked
against libc++.so, it can sometimes get a copy of the global object,
which is then at the same alignment.
However, with clang 3.7.0, the initialization of these global objects
will incorrectly use SSE instructions (e.g. movdqa), whenever the
optimization level is high enough, and SSE is enabled, such as on amd64.
When any of these objects is not aligned to 16 bytes, this will result
in a SIGBUS during iostream initialization. In contrast, clang 3.6.x
and earlier took the 8 byte alignment into consideration, and avoided
SSE for those particular operations.
After bisecting of upstream changes, I found that the above revision
caused the change of this behavior, so I am reverting it now as a
workaround, while a discussion and test case is being prepared for
upstream.
set div/rem default values to 'expensive' in TargetTransformInfo's
cost model
...because that's what the cost model was intended to do.
As discussed in D12882, this fix has a temporary unintended
consequence for SimplifyCFG: it causes us to not speculate an fdiv.
However, two wrongs make PR24818 right, and two wrongs make PR24343
act right even though it's really still wrong.
I intend to correct SimplifyCFG and add to CodeGenPrepare to account
for this cost model change and preserve the righteousness for the bug
report cases.
https://llvm.org/bugs/show_bug.cgi?id=24818https://llvm.org/bugs/show_bug.cgi?id=24343
Differential Revision: http://reviews.llvm.org/D12882
This fixes the too-eager fdiv hoisting in pow(), which could lead to
unexpected floating point exceptions.
Add missing atomic libcall support.
Support for emitting libcalls for __atomic_fetch_nand and
__atomic_{add,sub,and,or,xor,nand}_fetch was missing; add it, and some
test cases.
Differential Revision: http://reviews.llvm.org/D10847
This fixes "cannot compile this atomic library call yet" errors when
compiling code which calls the above builtins, on arm < v6.
Reverting r239883 and r240720:
------------------------------------------------------------------------
r239883 | echristo | 2015-06-17 00:09:32 -0700 (Wed, 17 Jun 2015) | 16 lines
Update the intel intrinsic headers to use the target attribute support.
This involved removing the conditional inclusion and replacing them
with target attributes matching the original conditional inclusion
and checks. The testcase update removes the macro checks for each
file and replaces them with usage of the __target__ attribute, e.g.:
int __attribute__((__target__(("sse3")))) foo(int a) {
_mm_mwait(0, 0);
return 4;
}
This usage does require the enclosing function have the requisite
__target__ attribute for inlining and code generation - also for
any macro intrinsic uses in the enclosing function. There's no change
for existing uses of the intrinsic headers.
------------------------------------------------------------------------
------------------------------------------------------------------------
r240720 | silvas | 2015-06-25 16:22:11 -0700 (Thu, 25 Jun 2015) | 6 lines
Remove `requires` for x86 CPU features.
Ever since the target attributes change, we don't need to guard these
headers with `requires`. Actually it's a bit worse, because if we do
then they are included textually under the covers, causing declarations
to appear in submodules they aren't supposed to be in.
------------------------------------------------------------------------
This reverts the changes to the intrinsics headers in trunk, which could
result in some ports' configure scripts misdetecting SSE (and higher)
support.
[SCCP] Turn loads of null into undef instead of zero initialized values
Surprisingly, this is a correctness issue: the mmx type exists for
calling convention purposes, LLVM doesn't have a zero representation for
them.
This partially fixes PR23999.
Pull in r241143 from upstream llvm trunk (by David Majnemer):
[LoopUnroll] Use undef for phis with no value live
We would create a phi node with a zero initialized operand instead of
undef in the case where no value was originally available. This was
problematic for x86_mmx which has no null value.
These fix a "Cannot create a null constant of that type!" error when
compiling the graphics/sdl2_gfx port with MMX enabled.
Reported by: amdmi3
Notable upstream commits (upstream revision in parens):
- Add a JSON producer to LLDB (228636)
- Don't crash on bad DWARF expression (228729)
- Add support of DWARFv3 DW_OP_form_tls_address (231342)
- Assembly profiler for MIPS64 (232619)
- Handle FreeBSD/arm64 core files (233273)
- Read/Write register for MIPS64 (233685)
- Rework LLDB system initialization (233758)
- SysV ABI for aarch64 (236098)
- MIPS software single stepping (236696)
- FreeBSD/arm live debugging support (237303)
- Assembly profiler for mips32 (237420)
- Parse function name from DWARF DW_AT_abstract_origin (238307)
- Improve LLDB prompt handling (238313)
- Add real time signals support to FreeBSDSignals (238316)
- Fix race in IOHandlerProcessSTDIO (238423)
- MIPS64 Branch instruction emulation for SW single stepping (238820)
- Improve OSType initialization in elf object file's arch_spec (239148)
- Emulation of MIPS64 floating-point branch instructions (239996)
- ABI Plugin for MIPS32 (239997)
- ABI Plugin for MIPS64 (240123)
- MIPS32 branch emulation and single stepping (240373)
- Improve instruction emulation based stack unwinding on ARM (240533)
- Add branch emulation to aarch64 instruction emulator (240769)
MC: Allow multiple comma-separated expressions on the .uleb128 directive.
For compatiblity with GNU as. Binutils documents this as
'.uleb128 expressions'. Subtle, isn't it?
Reported by: sbruno
PR: 199554
MFC after: 3 days
Fix assert instantiating string init of static variable
... when the variable's type is a typedef of a ConstantArrayType. Just
look through the typedef (and any other sugar). We only use the
constant array type here to get the element count.
This fixes an assertion failure when building the games/redeclipse port.
Reported by: amdmi3
As is described at http://llvm.org/bugs/show_bug.cgi?id=22408, the GNU
linkers ld.bfd and ld.gold currently only support a subset of the
whole range of AArch64 ELF TLS relocations. Furthermore, they assume
that some of the code sequences to access thread-local variables are
produced in a very specific sequence. When the sequence is not as the
linker expects, it can silently mis-relaxe/mis-optimize the
instructions.
Even if that wouldn't be the case, it's good to produce the exact
sequence, as that ensures that linkers can perform optimizing
relaxations.
This patch:
* implements support for 16MiB TLS area size instead of 4GiB TLS area
size. Ideally clang would grow an -mtls-size option to allow support
for both, but that's not part of this patch.
* by default doesn't produce local dynamic access patterns, as even
modern ld.bfd and ld.gold linkers do not support the associated
relocations. An option (-aarch64-elf-ldtls-generation) is added to
enable generation of local dynamic code sequence, but is off by
default.
* makes sure that the exact expected code sequence for local dynamic
and general dynamic accesses is produced, by making use of a new
pseudo instruction. The patch also removes two
(AArch64ISD::TLSDESC_BLR, AArch64ISD::TLSDESC_CALL) pre-existing
AArch64-specific pseudo SDNode instructions that are superseded by
the new one (TLSDESC_CALLSEQ).
Submitted by: Kristof Beyls
Differential Revision: https://reviews.freebsd.org/D2175
