Install headers from LLVM's libunwind in place of the headers from
libcxxrt and allow C applications to use the library.
As part of this, remove include/unwind.h and switch libthr over to
using the installed unwind.h.
Reviewed by: dim, emaste
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D34065
Namely:
- main was using two-space indentation
- re-sort local variables
- explicit braces for loop scope
- make flag bit comparison explicit
The first line of this commit message is unfortunately a lie, as it
introduces a minor functional change on non-FreeBSD systems. Namely,
the first branch is now explicitly compared against `0` and the choice
was made to compare it as greater than 0 to avoid issues on other
systems where `argc != 0` on entry isn't guaranteed (negative when
checked there).
Sponsored by: Klara, Inc.
Reserve couters in the tcps struct in preparation
for AccECN, extend the debugging output for TF2
flags, optimize the syncache flags from individual
bits to a codepoint for the specifc ECN handshake.
This is in preparation of AccECN.
No functional chance except for extended debug
output capabilities.
Reviewed By: #transport, rrs
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34161
This reverts commit 3de96d664a.
Problem is that it is possible to reach the state with ref_count ==
1 for the mapped non-anonymous object. For instance, anonymous posix
shmfd or linux shmfs object could be mapped, and then corresponding
file descriptor closed, dropping the object reference owned by the
shmfd/shmfs file. Then the check in inactive scan assumes that the
object and page are not mapped and frees the page, while they are not.
PR: 261707
Discussed with: markj
Sponsored by: The FreeBSD Foundation
MFC after: now
Backport from Linux 5.17 (drivers/infiniband/hw/mlx5/fs.c)
This fixes creating flow rules from user-space after the
kernel space update based on Linux 5.7-rc1 .
Sponsored by: NVIDIA Networking
This was missed in 74d6c131cb where other geom modules were annotated
with MODULE_VERSION. Again, the problem is the same: we can't detect
that geom_md is loaded into the kernel without it.
This was noticed in release builds on the cluster; mdconfig attempts to
load geom_md because it can't detect it in the kernel, but the cluster
config includes md(4) and does not build the kmod. This problem would
have been masked on hosts with the kmod built, as the kmod attempts to
register the g_md module and fails. With this commit, mdconfig would
not even try to load it again.
Reported by: re (cperciva)
MFC after: 3 days
This call was added back in the early days of dtrace porting and
no one knows why anymore. The extra flushing causes lots of
unnecessary CPU overhead when a script produces lots of output,
as well as easily losing output because the command can't keep up.
Sponsored by: Netflix
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D34216
LLDB currently defaults to enabled on all architectures except arm and
riscv64 (and can probably be enabled for 32-bit arm). Switch to an
opt-out list.
Reviewed by: pkubaj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34218
Libarchive 3.6.0
New features:
PR #1614: tar: new option "--no-read-sparse"
PR #1503: RAR reader: filter support
PR #1585: RAR5 reader: self-extracting archive support
New features (not used in FreeBSD base):
PR #1567: tar: threads support for zstd (#1567)
PR #1518: ZIP reader: zstd decompression support
Security Fixes:
PR #1491, #1492, #1493, CVE-2021-36976:
fix invalid memory access and out of bounds read in RAR5 reader
PR #1566, #1618, CVE-2021-31566:
extended fix for following symlinks when processing the fixup list
Other notable bugfixes and improvements:
PR #1620: tar: respect "--ignore-zeros" in c, r and u modes
PR #1625: reduced size of application binaries
MFC after: 2 weeks
Relnotes: yes
The ESXi NFSv4.1 client bogusly sends the wrong value
for the csa_sequence argument for a Create_session operation.
RFC8881 requires this value to be the same as the sequence
reply from the ExchangeID operation most recently done for
the client ID.
Without this patch, the server replies NFSERR_STALECLIENTID,
which is the correct response for an NFSv4.0 SetClientIDConfirm
but is not the correct error for NFSv4.1/4.2, which is
specified as NFSERR_SEQMISORDERED in RFC8881.
This patch fixes this.
This change does not fix the issue reported in the PR, where
the ESXi client loops, attempting ExchangeID/Create_session
repeatedly.
Reported by: asomers
Tested by: asomers
PR: 261291
MFC after: 1 week
The NVMe 1.4 spec simply says that Model and Serial numbers are
ASCII strings. Unlike SCSI, it doesn't prohibit non-printable
characters or say that the strings should be padded with spaces.
Since 2014, we have had cam_strvis_sbuf(), which gives additional
options for handling non-ASCII characters. That behavior hasn't
been available for non-sbuf consumers, so users of cam_strvis()
were left with having octal ASCII codes inserted.
So, to avoid having garbage or octal chracters in the strings, use
cam_strvis_sbuf() to create a new function, cam_strvis_flag(), and
re-implement cam_strvis() using cam_strvis_flag().
Now, for the NVMe drives, we can use cam_strvis_flag with the
CAM_STRVIS_FLAG_NONASCII_SPC flag. This transforms non-printable
characters into spaces.
sys/cam/cam.c:
Add a new function, cam_strvis_flag(), that creates an sbuf
on the stack with the user's destination buffer, and calls
cam_strvis_sbuf() with the given flag argument.
Re-implement cam_strvis() to call cam_strvis_flag with the
CAM_STRVIS_FLAG_NONASCII_ESC argument. This should be the
equivalent of the old cam_strvis() function, except for the
overhead of creating the sbuf and calling sbuf_putc/printf.
sys/cam/cam.h:
Declaration for cam_strvis_flag.
sys/cam/nvme/nvme_all.c:
In nvme_print_ident, use the NONASCII_SPC flag with
cam_strvis_flag().
sys/cam/nvme/nvme_da.c:
In ndaregister(), use cam_strvis_flag() with the
NONASCII_SPC flag for the disk description and serial
number we report to GEOM.
sys/cam/nvme/nvme_xpt.c:
In nvme_probe_done(), use cam_strvis_flag with the
NONASCII_SPC flag when storing the drive serial number
in the CAM EDT.
MFC after: 1 week
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D33973
The optimization of sysctlbyname() in commit d05b53e0ba had the
side-effect of not going through the fix-up for the user.* variables
in the previously called sysctl() function.
This lead to 0 or an empty strings being returned by sysctlbyname()
for all user.* variables.
An alternate implementation would store the user variables in the
kernel during system start-up. That would allow to remove the fix-up
code in the C library that is currently required to provide the actual
values.
This update restores the previous code path for the user.* variables
and keeps the performance optimization intact for all other variables.
Approved by: mjg
Reviewed by: kaktus
Differential Revision: https://reviews.freebsd.org/D34171
This produces an "expansion of date or time macro is not reproducible"
warning or error upon use of __DATE__ or __TIME__.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29580
During a recent deep dive into all the variables so I could
discover why stack switching caused larger retransmits I examined
every variable in rack. In the process I found quite a few bits
that were not used and needed cleanup. This update pulls
out all the unused pieces from rack. Note there are *no* functional
changes here, just the removal of unused variables and a bit of
spacing clean up.
Reviewed by: Michael Tuexen, Richard Scheffenegger
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D34205
disconnection function.
Disconnecting hooks are called outside of NET_EPOCH, but
ng_pppoe_disconnect() calls NG_SEND_DATA_ONLY() which should be called
in NET_EPOCH.
PR: 257067
Reported by: niels=freebsd@bakker.net
Reviewed by: vmaffione (mentor), glebius, donner
Approved by: vmaffione (mentor), glebius, donner
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D34185
While there, remove a duplicate inclusion of sysctl.h.
Reported by: Gary Jennejohn
Fixes: a35bdd4489 - main - tcp: add sysctl interface for setting socket options
Sponsored by: Netflix, Inc.
In GNU ld and ld.lld, -dc is used with -r to allocate space to COMMON
symbols. It is presumably to work around legacy code which cannot
handle COMMON symbols in relocatable output. ld.lld may remove -dc or
make it a no-op for the 15.0.0 release.
As of 7420b323a0 crunch/crunchide does not require -dc, as the symbol
hiding technique no longer relied on making symbols local.
In addition -fno-common is now the default in Clang and GCC, so -dc
serves no purpose as the compiler does not generate COMMON symbols
anyway.
See https://maskray.me/blog/2022-02-06-all-about-common-symbols for more
detail on common symbols.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34215
tcpsso is a command line tool to apply a socket option to an
existing TCP endpoint, which is identified by the inp_gencnt.
tcpsso can be used, for example, to switch the congestion control
module or the TCP stack.
Reviewed by: rrs, rscheff, debdrup, pau amma
Relnotes: yes
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D34139
* unit-tests/Makefile: disable opt-debug-x-trace on Linux if there
is any chance we have dash as .SHELL
* meta.c: use a variable to hold command line to be filtered
to avoid any side effects from content of command line.
Merge commit '535c59a6a9214436f5d6643775d29808e4b3408d'
* unit-tests/Makefile: disable opt-debug-x-trace on Linux if there
is any chance we have dash as .SHELL
* meta.c: use a variable to hold command line to be filtered
to avoid any side effects from content of command line.
Switch to using an nvlist with nvlist_send()/nvlist_recv() to
communicate from bhyvectl(8) to bhyve(8).
The idea is that a bhyve process receives a command with with a set of
arguments. The nvlist here is structured to reflect that premise.
For example, to snapshot the vm, the expected nvlist looks like:
{ cmd=START_CHECKPOINT, filename="filename" }
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33977
Libarchive 3.6.0
New features:
PR #1614: tar: new option "--no-read-sparse"
PR #1503: RAR reader: filter support
PR #1585: RAR5 reader: self-extracting archive support
New features (not used in FreeBSD base):
PR #1567: tar: threads support for zstd (#1567)
PR #1518: ZIP reader: zstd decompression support
Security Fixes:
PR #1491, #1492, #1493, CVE-2021-36976:
fix invalid memory access and out of bounds read in RAR5 reader
PR #1566, #1618, CVE-2021-31566:
extended fix for following symlinks when processing the fixup list
Other notable bugfixes and improvements:
PR #1620: tar: respect "--ignore-zeros" in c, r and u modes
PR #1625: reduced size of application binaries
Obtained from: libarchive
Libarchive commit: 9147def1da7ad1bdd47b3559eb1bfeeb0e0f374b
Libarchive tag: v3.6.0
This interface allows to set a socket option on a TCP endpoint,
which is specified by its inp_gencnt. This interface will be
used in an upcoming command line tool tcpsso.
Reviewed by: glebius, rrs
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D34138
In the (extremely unlikely) case of vd->vd_height ==
vt_logo_sprite_height the vd_drawrect code would write outside of
frame-buffer memory.
MFC after: 1 week
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D34220
It fails during GitHub cross-build actions from Ubuntu 20.04.
sjg investigated and found it is a dash bug; a more extensive change
to handle this case will come in the next bmake update.
Reviewed by: sjg
Differential Revision: https://reviews.freebsd.org/D34219
While mlx5 is not yet enabled on powerpc64le, cxgbe is.
The binary seems to work properly.
Differential revision: https://reviews.freebsd.org/D34026
Reviewed by: emaste
s=/=_=g in tested names so that all the objects live in $OBJDIR. This is
more robust than depending on side effects of auto OBJDIR features and
should fix buildworld issues some people have seen.
Suggested by: sjg@
Sponsored by: Netflix
tcp_ctloutput_set() will be used via the sysctl interface in a
upcoming command line tool tcpsso.
Reviewed by: glebius, rscheff
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D34164
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
Since TD_IS_RUNNING() and TS_ON_RUNQ() are defined as logical
expressions involving '==', clang 14 warns about them being checked with
a bitwise operator instead of a logical one:
```
sys/kern/tty_info.c:124:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
runa = TD_IS_RUNNING(td) | TD_ON_RUNQ(td);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
sys/sys/proc.h:562:27: note: expanded from macro 'TD_IS_RUNNING'
^
sys/kern/tty_info.c:124:9: note: cast one or both operands to int to silence this warning
sys/sys/proc.h:562:27: note: expanded from macro 'TD_IS_RUNNING'
^
sys/kern/tty_info.c:129:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
runb = TD_IS_RUNNING(td2) | TD_ON_RUNQ(td2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
sys/sys/proc.h:562:27: note: expanded from macro 'TD_IS_RUNNING'
^
sys/kern/tty_info.c:129:9: note: cast one or both operands to int to silence this warning
sys/sys/proc.h:562:27: note: expanded from macro 'TD_IS_RUNNING'
^
```
Fix this by using logical operators instead. No functional change
intended.
Reviewed by: cem, emaste, kevans, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34186
All pmaps share the top half of the address space. With 3-level page
tables, the top-level kernel map entries are not static: they might
change if the kernel map is extended (via pmap_growkernel()) or a 1GB
mapping in the direct map is demoted (not implemented yet). Thus the
riscv pmap maintains the allpmaps list to synchronize updates to
top-level entries.
When a pmap is created, it is inserted into this list after copying
top-level entries from the kernel pmap. The copying is done without
holding the allpmaps lock, and it is possible for pmap_pinit() to race
with kernel map updates. In particular, if a thread is modifying L1
entries, and a concurrent pmap_pinit() copies the old version of the
entries, it might not receive the update.
Fix the problem by copying the kernel map entries after inserting the
pmap into the list. This ensures that the nascent pmap always receives
updates, though pmap_distribute_l1() may race with the page copy.
Reviewed by: mhorne, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34158
There was nothing preventing one from sending an empty fragment on an
arbitrary KTLS TX-enabled socket, but ktls_frame() asserts that this
could not happen. Though the transmit path handles this case for TLS
1.0 with AES-CBC, we should be strict and allow empty fragments only in
modes where it is explicitly allowed.
Modify sosend_generic() to reject writes to a KTLS-enabled socket if the
number of data bytes is zero, so that userspace cannot trigger the
aforementioned assertion.
Add regression tests to exercise this case.
Reported by: syzkaller
Reviewed by: gallatin, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34195
Most fget*() functions initialize the output parameter to NULL. Make
the externally visible interface behave consistently, and make
fget_unlocked_seq() private to kern_descrip.c.
This fixes at least one bug in a consumer, _filemon_wrapper_openat(),
which assumes that getvnode() sets the output file pointer to NULL upon
an error.
Reported by: syzbot+01c0459408f896a5933a@syzkaller.appspotmail.com
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34190
