- Do not set Os to FreeBSD explicitly. We don't do it in other manual
pages.
- Remove macros from the -width specifier.
- Use Xr instead of Cm to refer to the freebsd-update command.
- Address some mandoc lint warnings and use \(em instead of --.
- Wordsmith some paragraphs.
- Add a missing El macro.
MFC after: 1 week
This contain mmap_read_lock, mmap_read_unlock and mmap_write_lock_killable
which are abstraction around down_read, up_read and down_write_killable.
Note that in Linux 5.8 mmap_sem was renamed to mmap_lock.
We might want to do the same at some point but some drivers still uses
the old mmap locking API.
Reviewed by: bz
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34297
This simply set the brightness of a backlight device.
Needed by drm-kmod v5.8
Reviewed by: bz, emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34285
This returns the wait queue based on the object but in LinuxKPI
we only have one waitqueue for this.
Reviewed by: hselasky, bz
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D34250
Deleting hack.c cause the kernel to always be out of date:
$ make kernel
make: /usr/src/sys/amd64/compile/GENERIC/.depend.hack.pico, 1:
ignoring stale .depend for hack.c
:> hack.c
cc -shared -O2 -pipe ... -nostdlib hack.c -o hack.pico
rm -f hack.c
MAKE="make" sh ../../../conf/newvers.sh "-R" GENERIC
cc -c -O2 -pipe ... -std=iso9899:1999 -Werror vers.c
ctfconvert -L VERSION -g vers.o
linking kernel.full
Keeping hack.c in the compile directory causes no harm,
so there's no reason to delete it.
Also rename the file to "force-dyamic-hack.c" so it is
clear what the hack is aboug.
Reviewed by: sjg
Differential Revision: https://reviews.freebsd.org/D34281
In linuxkpi_ieee80211_rx() check if the frame is a beacon once upfront
and use the result for enhanced debugging and further checks.
This was done intially for rx_status->device_timestamp debugging.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
We disabled hw_scan for drivers not advertising SINGLE_SCAN_ON_ALL_BANDS.
Do not depend on this hw flag to set IEEE80211_FEXT_SCAN_OFFLOAD for
net80211 as otherwise scanning will never work.
Long-term we probably want to re-think how we do/integrate hw_scan
better in net80211.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
There is a problem with some drivers, such as rtw88, asking for more
headroom than we currently can handle throughout the stack (we have
other legacy wireless driver in the tree with similar problems).
This may trigger an assertion in the TCP syncache where we are checking
for a reply to fit in MHLEN.
While for the moment we still copy data from mbufs to skbs,
we can simply disable the extra headroom request in ic_headroom and
deal with it ourselves (which we already did anyway).
Leave a link to the thread on freebsd-transport detailing more of the
problem so we can find it again and solve it here or there.
MFC after: 3 days
I intend to move these into lib/libthr/tests/ and connect to kyua. This
is a first step to address warnings emitted when building using standard
make infrastructure.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34306
This could be done better by making each test a separate ATF test case.
This exercise is left for the reader.
Reviewed by: delphij (earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34303
NetBSD has an ATF test for newfs_msdos. Connect it to the build.
Adapt it for FreeBSD. This would have caught the bug fixed by my
previous commit.
Reviewed by: delphij, emaste
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34116
The type of the kern.maxphys sysctl OID is now ulong. Change the
local variable type to match.
Reviewed by: delphij, emaste
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34116
udp_set_kernel_tunneling() rejects new callbacks if one is already set.
Allow callbacks to be cleared. The use case for this is OpenVPN DCO,
where the socket is opened by userspace and then adopted by the kernel
to run the tunnel. If the DCO interface is removed but userspace does
not close the socket (something the kernel cannot prevent) the installed
callbacks could be called with an invalidated context.
Allow new functions to be set, but only if they're NULL (i.e. allow the
callback functions to be cleared).
Reviewed by: tuexen
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34288
Add and sort in more defines needed by newer drivers.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34293
The Realtek driver assumes an early chandef to be set. At the time
of linuxkpi_ieee80211_ifattach() we do not really know one yet so
try to find the first one which is available and set that.
This prevents a NULL-deref panic.
MFC after: 3 days
Turned out all the workq's taskqueues were named "wlanNA" if you had
more then one card in a machine as by the time we called wiphy_name()
the device name was not set yet and we returned the fallback.
Move the alloc_ordered_workqueue() from linuxkpi_ieee80211_alloc_hw()
to linuxkpi_ieee80211_ifattach() at which time the device name has
to be set to give us a unique name.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Realtek's rtw88 is returning a hard-coded 1 in case they cannot
hw_scan (fw not advertising it). In that case if we want any scan
to run we need to fall-back to sw scan. Start dealing with this.
Long-term we probably need to keep internal state.
MFC after: 3 days
Currently armv8crypto copies the scheme used in aesni(9), where payload
data and output buffers are allocated on the fly if the crypto buffer is
not virtually contiguous. This scheme is simple but incurs a lot of
overhead: for an encryption request with a separate output buffer we
have to
- allocate a temporary buffer to hold the payload
- copy input data into the buffer
- copy the encrypted payload to the output buffer
- zero the temporary buffer before freeing it
We have a handy crypto buffer cursor abstraction now, so reimplement the
armv8crypto routines using that instead of temporary buffers. This
introduces some extra complexity, but gallatin@ reports a 10% throughput
improvement with a KTLS workload without additional CPU usage. The
driver still allocates an AAD buffer for AES-GCM if necessary.
Reviewed by: jhb
Tested by: gallatin
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28950
This is in preparation for using buffer cursors. No functional change
intended.
Reviewed by: jhb
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28948
This was useful in converting armv8crypto to use buffer cursors. There
are some cases where one wants to make two passes over data, and this
provides a way to "reset" a cursor.
Reviewed by: jhb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28949
Various updates to skbuff for new/updated drivers and some housekeeping:
- update types and struct members, add new (stub) functions
- improve freeing of frags.
- fix an issue with sleeping during alloc for dev_alloc_skb().
- Adjust a KASSERT for skb_reserve() which apparently can be called
multiple times if no data was put into the skb yet.
- move the sysctl from linux_8022.c (which may be in a different module)
to linux_skbuff.c so in case we turn debugging on we do not run into
unresolved symbols. Rename the sysctl variable to be less conflicting
and update debugging macros along with that; also add IMPROVE().
- add DDB support to show an skbuff.
- adjust comments/whitespace.
No functional changes intended for iwlwifi.
Sponsored by: The FreeBSD Foundation (partially)
MFC after: 3 days
This update is for more/newer versions of drivers:
- add and properly place more structs, enums, defines needed by drivers.
- correct types of struct fields.
- make various function arguments const.
- move REG_RULE() macro to its own file regulatory.h and
use macros for calculations.
- add linuxkpi_ieee80211_get_channel() implementation.
- change linuxkpi_ieee80211_ifattach() to return int for error checking.
No intended functional changes for iwlwifi.
Sponsored by: The FreeBSD Foundation (partially)
MFC after: 3 days
Add lockdep_assert_not_held() asserting LA_UNLOCKED as needed by a
driver.
MFC after: 3 days
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D34232
Arno Tuber reported via email that he needed to restart the gssd daemon
after booting, to get his Kerberized NFS mount to work.
Without this patch, rcorder shows that the gssd starts before NETWORKING
and kdc. The gssd will need NETWORKING to connect to the KDC and, if
the kdc is running on the same system, it does not make sense to start it
before the kdc. This fixed the problem for Arno.
While here, I also added a "# BEFORE: mountcritremote".
It does not affect ordering at this time, but I felt
it should be added, since the gssd needs to be running
when remote NFS mounts are done.
PR: 261939
Reported by: anothatuber@gmail.com
Tested by: anothatuber@gmail.com
Reviewed by: rew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34265
Allow users to test changes and find GCC-specific issues using Cirrus-CI
against their own GitHub forks.
Reviewed by: lwhsu, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34289
callout *_sbt functions are used to reduce ping/timeout scheduling
overhead, while allowing later improvments in the functionality.
Keep similar 1000ms callouts while adding a 10 ms window, to allow
some kernel scheduling improvements.
Reviewed By: jhb
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34222
The nvlist for a checkpoint request will now look like:
{ cmd="checkpoint", suspend="true/false", filename="afilename" }
Reviewed by: jhb
Suggested by: jhb
Differential Revision: https://reviews.freebsd.org/D34237
This is useful for processors where we don't have an event table; in
those cases we default to a Cortex A8 (armv7) or Cortex A53 (arm64) in
order to attempt to provide something useful, but you're then limited to
the counters in those tables, some of which may also not be implemented
(e.g. LD/ST_RETIRED are no longer implemented in more recent cores,
replaced by LD/ST_SPEC).
Adding the raw EVENT_xxH event lists to each table ensures that you can
always request the exact events you want, regardless of what has been
detected or is known.
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33805
These zones are cache zones used to allocate TLS offload contexts from
firmware. Releasing items from the cache is a sleepable operation due
to the need to await a response from the firmware command freeing the
tag, so items cannot be reclaimed from the zone in non-sleepable
contexts. Since the cache size is limited by firmware limits, avoid
this by setting UMA_ZONE_UNMANAGED to avoid reclamation by uma_timeout()
and the low memory handler.
Reviewed by: hselasky, kib
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34142
Allow a zone to opt out of cache size management. In particular,
uma_reclaim() and uma_reclaim_domain() will not reclaim any memory from
the zone, nor will uma_timeout() purge cached items if the zone is idle.
This effectively means that the zone consumer has control over when
items are reclaimed from the cache. In particular, uma_zone_reclaim()
will still reclaim cached items from an unmanaged zone.
Reviewed by: hselasky, kib
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34142
