usage of a function computing the checksum only over a part of the function.
Therefore introduce in6_cksum_partial() and implement in6_cksum() based
on that.
While there, ensure that the UDPLite packet contains at least enough bytes
to contain the header.
Reviewed by: kevlo
MFC after: 3 days
Previous logic was not differentiating disconnected LUNs and absent targets.
That made it to stop scan if LUN 0 was not found for any reason. That made
problematic, for example, using iSCSI targets declaring SPC-2 compliance and
having no LUN 0 configured.
The new logic continues sequential LUN scan if:
-- we have more configured LUNs that need recheck;
-- this LUN is connected and its SCSI version allows more LUNs;
-- this LUN is disconnected, its SCSI version allows more LUNs and we
guess they may be connected (we haven't scanned first 8 LUNs yet or
kern.cam.cam_srch_hi sysctl is set to scan more).
Reported by: trasz
MFC after: 1 month
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.
All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.
Discussed with: grehan
Instead requeue mbuf back to IPv4 protocol handler. If there is one extra IP-IP
encapsulation, it will be handled with tunneling interface. And thus proper
interface will be exposed into mbuf's rcvif. Also, tcpdump that listens on tunneling
interface will see packets in both directions.
Sponsored by: Yandex LLC
It defines a variable and its default value in load_rc_config() just after
rc.conf is loaded. "rcvar" command shows the current and the default values.
This is an attempt to solve a problem that rc.d scripts from third-party
software do not have entries in /etc/defaults/rc.conf. The fact that
load_rc_config() reads rc.conf only once and /etc/rc invokes the function
before running rc.d scripts made developers confused for a long time because
load_rc_config() just before run_rc_command() in each rc.d script overrides
variables only when the script is directly invoked, not from /etc/rc.
Variables defined in set_rcvar are always set in load_rc_config() after
loading rc.conf. An rc.d script can now be written in a self-contained
manner regarding the related variables as follows:
---
name=foo
rcvar=foo_enable
set_rcvar foo_enable YES "Enable $name"
set_rcvar foo_flags "-s" "Flags to $name"
...
load_rc_config $name
run_rc_command "$@"
---
if_lagg(4) interfaces which were cloned in a vnet jail.
Sysctl nodes which are dynamically generated for each cloned interface
(net.link.lagg.N.*) have been removed, and use_flowid and flowid_shift
ifconfig(8) parameters have been added instead. Flags and per-interface
statistics counters are displayed in "ifconfig -v".
CR: D842
This is temporary commit to be merged to 10.
Other approach (like hash table) should be used
to store different masks.
PR: 194078
Submitted by: Rumen Telbizov
MFC after: 3 days
that keeps track of a particular region of the image. In particular the
image_data() function needs to return to the caller whether a region
contains data or is all zeroes. This required reading the region from
the temporary file and comparing the bytes. When image_data() is used
multiple times for the same region, this will get painful fast.
With a chunk describing a region of the image, we now also have a way
to refer to the image provided on the command line. This means we don't
need to copy the image into a temporary file. We just keep track of the
file descriptor and offset within the source file on a per-chunk basis.
For streams (pipes, sockets, fifos, etc) we now use the temporary file
as a swap file. We read from the input file and create a chunk of type
"zeroes" for each sequence of zeroes that's a multiple of the sector
size. Otherwise, we allocte from the swap file, mmap(2) it, read into
the mmap(2)'d memory and create a chunk representing data.
For regular files, we use SEEK_HOLE and SEEK_DATA to handle sparse files
eficiently and create a chunk of type zeroes for holes and a chunk of
type data for data regions. For data regions, we still compare the bytes
we read to handle differences between a file system's block size and our
sector size.
After reading all files, image_write() is used by schemes to scribble in
the reserved sectors. Since this never amounts to much, keep this data
in memory in chunks of exactly 1 sector.
The output image is created by looking using the chunk list to find the
data and write it out to the output file. For chunks of type "zeroes"
we prefer to seek, but fall back to writing zeroes to handle pipes.
For chunks of type "file" and "memoty" we simply write.
The net effect of this is that for reasonably large images the execution
time drops from 1-2 minutes to 10-20 seconds. A typical speedup is about
5 to 8 times, depending on partition sizes, output format whether in
input files are sparse or not.
Bump version to 20141001.
This has the side effect of ensuring that realpath is also run for the
nominal case of PORTSDIR=/usr/ports (assuming .CURDIR is a ports directory
that relies on /usr/ports but is not rooted in it). This ensures that any
generated PORTSDIR used is always the actual location.
Submitted by: jkim (different implementation)
while here:
+ Fix an issue when extracting small archives where dialog_mixedgauge was
not rendering; leaving the user wondering if anything happened.
+ Add #ifdef's to assuage compilation against older libarchive
NB: Minimize diff between branches; make merging easier.
+ Add missing calls to end_dialog(3)
+ Change string processing from strtok(3) to strcspn(3) (O(1) optimization)
+ Use EXIT_SUCCESS and EXIT_FAILURE instead of 0/1
+ Optimize getenv(3) use, using stored results instead of calling repeatedly
NB: Fixes copy/paste error wherein we display getenv(BSDINSTALL_DISTDIR) in
an error msgbox when chdir(2) to getenv(BSDINSTALL_CHROOT) fails
(wrong variable displayed in msgbox).
+ Use strtol(3) instead of [deprecated] atoi(3)
+ Add additional error checking (e.g., check return of archive_read_new(3))
+ Assign DECONST strings to static variables
+ Fix typo in distextract.c error message (s/Could could/Could not/)
+ Add comments and make a minor whitespace adjustment
Reviewed by: nwhitehorn, julian
Use standard mdoc macros instead of pure roff, fix some other mdoc usage,
make the style consistent, and fix some grammar issues.
Approved by: hrs (mentor)
Some watchdog drivers (like ipmi) need to sleep while patting the watchdog.
See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK).
Submitted by: asomers
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 637548 on 2012/10/04
This is checked for in the zfs_snapshot_004_neg STF/ATF test (currently
still in projects/zfsd rather than head).
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zfs_vfsops.c:
- zfsvfs_create(): Check whether the objset name fits into
statfs.f_mntfromname, and return ENAMETOOLONG if not. Although
the filesystem can be unmounted via the umount(8) command, any
interface that relies on iterating on statfs (e.g. libzfs) will
fail to find the filesystem by its objset name, and thus assume
it's not mounted. This causes "zfs unmount", "zfs destroy",
etc. to fail on these filesystems, whether or not -f is passed.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 974872 on 2013/08/09
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
that this means full checksum coverage for received packets.
If an application is willing to accept packets with partial
coverage, it is expected to use the socekt option and provice
the minimum coverage it accepts.
Reviewed by: kevlo
MFC after: 3 days
Also increase default for Tx queue get-list limit.
Too small limit results in TCP packets drops especiall when many
streams are running simultaneously.
Put list may be kept small enough since it is just a temporary
location if transmit function can't get Tx queue lock.
Submitted by: Andrew Rybchenko <arybchenko at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
