Copy the support files for the Octeon 1 CPU from sys/mips/octeon1 on
the projects/mips side to sys/mips/cavium on the head side to conform
to the other vendor code. This code was contributed by Cavium to the
project and forward ported by Warner Losh, with some additional code
from Randal Stewart.
# I'll fix the building problems the move creates in a future commit.
Copy over the support files (except sys/conf and sys/mips/conf) for
RMI XLR processor support. This port has been contributed by RMI and
brought up to date by Randal Stewart (rrs@). This port is a work in
progress, and there might still be significant changes. The port
makes it to multi-user, but is still early beta.
Merge support files for the Atheros AR71xx (and soon AR9xxx)
processors, except files from sys/conf and sys/mips/conf. This work
was done primarily by Olecksandr Tymoshenko and works on the
RouterStation and RouterStation PRO. Other AR71xx-based boards have
been reported as working as well (RouterBoard, for example).
Copy the files for the sibyte support (except files in sys/conf and
sys/mips/conf). This targets the Broadcom SWARM board (bcm91250) and
the SB-1 core in the BCM1250 SoC. This work was done by Neel Natu.
r201902 | imp | 2010-01-09 10:16:19 -0700 (Sat, 09 Jan 2010) | 2 lines
Fix comment, which was missed in an earlier commit...
r195669 | gonzo | 2009-07-13 17:03:44 -0600 (Mon, 13 Jul 2009) | 3 lines
- Remove -mno-dsp from CFLAGS. MIPS DSP ASE is off by default
now (as it should be)
the commit message for r201896 actually should have read:
As nfsm_srvmtofh_xx() assumes the 4-byte alignment required by XDR
ensure the mbuf data is aligned accordingly by calling nfs_realign()
in fha_extract_info(). This fix is orthogonal to the problem solved
by r199274/r199284.
PR: 142102 (second part)
MFC after: 1 week
how hashed MD5/SHA are implemented, abusing Final() for padding and
sw_octx to transport the key from the beginning to the end.
Enlightened about what was going on here by: cperciva
Reviewed by: cperciva
MFC After: 3 days
X-MFC with: r187826
PR: kern/126468
descriptor for the LDT) is populated. md_ldt is used by context-switch
code as indicator that LDT segment register shall be loaded with
GUSERLDT segment instead of 0, so context switch at the wrong time may
cause attempt to load non-populated descriptor.
Use store with the barrier to prevent other CPUs from seeing updated
md_ldt but not seeing updated md_ldt_sd. Multithreaded process may
context-switch to another thread of the process on another CPU and read
md_ldt.
MFC after: 1 week
r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines
- Add support for handling TLS area address in kernel space.
From the userland point of view get/set operations are
performed using sysarch(2) call.
Pass the channel argument as a real argument and not through
RXON. The RXON version seems to have problem with both the older
228.57.2.23 firmware and the latest 228.61.2.24 version resulting
in device initialization errors like:
wpa_supplicant[2928]: Failed to initiate AP scan.
kernel: firmware error log:
kernel: error type = "SYSASSERT" (0x00000005)
kernel: program counter = 0x0000147C
kernel: source line = 0x0000058B
kernel: error data = 0x0000058B00000000
kernel: branch link = 0x0000145A00001492
kernel: interrupt link = 0x000006DE00000000
kernel: time = 7310
...
kernel: iwn0: iwn_config: could not set TX power
kernel: iwn0: iwn_init_locked: could not configure device, error 35
By passing the current channel to hal->set_txpower() the firmware
error is fixed, at least for the 4965 chipset of my Thinkpad and
the ones tested by Bernhard.
Submitted by: Bernhard Schmidt <bschmidt@techwires.net>
Approved by: rpaulo
correctly. The 256MB segment is formed by taking the top 4 bits
of the address of the instruction in the "branch delay" slot
as opposed to the 'J' or 'JAL' instruction itself.
Approved by: imp (mentor)
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html
In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq
rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.
Reviewed by: jeff
Tested by: pho, Giovanni Trematerra
Sponsored by: Nokia Incorporated, Sandvine Incorporated
MFC after: 2 weeks
r195030 | gonzo | 2009-06-25 19:27:31 -0600 (Thu, 25 Jun 2009) | 4 lines
- Switch to libc softfloat from libgcc implementation. The problem
with latter is that it is not complete, fpsetXXX/fpgetXXX
functions are missing.
r197800 | gonzo | 2009-10-06 00:35:52 -0600 (Tue, 06 Oct 2009) | 3 lines
- curbrk variable for sbrk and brk should be the same
- Add correct variable names to Symbol.map
r195025 | gonzo | 2009-06-25 19:01:50 -0600 (Thu, 25 Jun 2009) | 4 lines
- Move fpgetXXX.c/fpsetXXX.c sources to hardfloat subdir/
to prevenmt them from being mixed up with lib/libc/softfloat
files with the same names
r194519 | gonzo | 2009-06-19 17:28:26 -0600 (Fri, 19 Jun 2009) | 3 lines
- set -mabicalls and -msoft-float as a default in order to
simplify building ports
r195030 | gonzo | 2009-06-25 19:27:31 -0600 (Thu, 25 Jun 2009) | 4 lines
- Switch to libc softfloat from libgcc implementation. The problem
with latter is that it is not complete, fpsetXXX/fpgetXXX
functions are missing.
