Commit Graph

43967 Commits

Author SHA1 Message Date
Bruce Evans
bd00dbfafc "Fixed" assorted bitrot. remove_dev() was renamed to destroy_dev().
VOP_ABORTOP() went away.  at_shutdown() was replaced by undocumented
event handling.  Rename remove_dev() here too, and remove the dead
and dead wrong man pages.
1999-12-23 17:16:32 +00:00
Bruce Evans
e7678c1e4c Fixed missing declarations of futimes(2) and lutimes(2). 1999-12-23 17:00:03 +00:00
Bruce Evans
86d78d200a Fixed missing declaration of lchmod(2). 1999-12-23 16:57:54 +00:00
Bruce Evans
a0d660c26b Fixed missing #include in synopsis.
Fixed misspelling of VGLPanScreen in its prototype.
Fixed missing installation of link to VGLPanScreen.3.
1999-12-23 16:56:27 +00:00
Bruce Evans
d3f0d184db Fixed a formatting error in the prototype for crypt(). 1999-12-23 16:53:18 +00:00
Bruce Evans
e7589db845 Fixed bitrot in synopsis. The change from "int *pshared" to "int pshared"
hadn't reached here.
1999-12-23 16:51:27 +00:00
Bruce Evans
2f64ff4437 Fixed wrong #include in synopsis. 1999-12-23 16:48:57 +00:00
Bruce Evans
7452ae6ecc Fixed missing `const' in synopsis. 1999-12-23 16:46:34 +00:00
Bruce Evans
6785844d79 Fixed missing includes in synopsis. 1999-12-23 16:38:51 +00:00
Bruce Evans
e395da92c4 Fixed missing installation of a link to ctermid_r.3. 1999-12-23 16:36:48 +00:00
Bruce Evans
de7067ac25 Fixed missing declaration of ctermid_r(3). 1999-12-23 16:33:12 +00:00
Bruce Evans
79ac896751 Fixed wrong prototype and missing include for strsignal(3). strsignal()
takes an int arg and is prototyped in <string.h>.  It has the opposite
interface botches to psignal(3) which takes a bogus unsigned arg but is
prototyped in the right place.

This is not the last of the interface problems for strsignal().  We
obtained it from NetBSD, but NetBSD has moved its prototype to
<unistd.h>.  strsignal() should return const char *, but it returns
char * for historical reasons.  NetBSD declares it as returning
__aconst char, where __aconst is normally empty but can be set to
`const' to give better error checking.  glibc-2.1.1 prototypes
strsignal() in <string.h>.
1999-12-23 16:29:58 +00:00
Bruce Evans
3050159ad5 Fixed missing installation of a link to getlogin_r.3. This is the first
example of section 2 and section 3 interfaces sharing a man page.  It's
probably a bad example.
1999-12-23 16:12:24 +00:00
Bruce Evans
c6dfd71a9f Fixed missing declaration of getlogin_r(3). 1999-12-23 16:06:12 +00:00
Bruce Evans
fb59427e5c Fixed missing installation of a link to rand_r.3. 1999-12-23 16:00:50 +00:00
Bruce Evans
dea750ae4c Fixed missing declaration of rand_r(3). 1999-12-23 15:58:20 +00:00
Bruce Evans
19fa8f60e9 Fixed missing declaration of getdents(2). 1999-12-23 15:52:13 +00:00
Bruce Evans
7e58bfacbe Update the unclean flag for mount -u. I forgot to handle this case
when I made the absence of the clean flag sticky in rev.1.88.  This
was a problem main for "mount /".  There is no way to mount "/" for
writing without using mount -u (normally implicitly), so after
"mount -f /" of an unclean filesystem, the absence of the clean flag
was sticky forever.
1999-12-23 15:42:14 +00:00
Peter Wemm
473ee77f29 Fix the fixfsfile() so that it works for both block and character devices
as root.  This could fix the "filesystem still dirty after fsck" problem.

Submitted by:   bde
1999-12-23 14:44:36 +00:00
Marcel Moolenaar
1671c412aa Define genassym related macros in a seperate include file to prevent
each and every xxx_genassym.c file to seperately define these and
also to promote uniformity and a level of abstraction.

Symbols are created as unsigned long by default and overridable on
a per file basis.
1999-12-23 14:06:58 +00:00
Marcel Moolenaar
3e3a313398 Descent into sub-makes with a fixed PATH. The PATH does not contain
/usr/games on purpose. All tools in /usr/games are built as part of
the tool stages to support building world on machines without games.

This fixes any build problems that have been caused by non-standard
paths and also removes the primary objection for not using absolute
paths.
1999-12-23 13:53:44 +00:00
Marcel Moolenaar
3eafbc1a3a Revert previous commit, and
o  Add genassym to the list of cross-tools
o  Remove sh hashing work-around, we don't need it anymore
o  Clean more directories in WORLDTMP when NOCLEAN is specified

The sh hashing work-around is not needed anymore, because we don't
trigger the bug anymore.

When NOCLEAN is not defined, we wipe out the complete WORLDTMP,
including the object directories of the tools we have built. When
NOCLEAN is defined, we remove anything that we install anyway, which
is usr/bin, usr/games, usr/include, usr/lib and usr/sbin.
1999-12-23 11:25:34 +00:00
Marcel Moolenaar
e202332cc4 Enable genassym. 1999-12-23 11:10:23 +00:00
Marcel Moolenaar
00dcf020d6 New command for creating assembler symbols from C. 1999-12-23 11:07:45 +00:00
Daniel C. Sobral
48d9eeb33a configSamba is gone, and is not coming back. 1999-12-23 10:16:46 +00:00
Poul-Henning Kamp
b69b535811 Duh! Also remove inter.phone from the makefile. 1999-12-23 09:28:49 +00:00
Poul-Henning Kamp
86c00aae88 Remove this file for the same reasons as for na.phone: There are
better and more comprehensive and reliable sources for such
information in the global village.
1999-12-23 08:52:59 +00:00
Bill Paul
b6219c623c Fix minor typo in comments about WaveLAN/IEEE driver: 802.1 -> 802.11 1999-12-23 05:32:53 +00:00
Bill Paul
0c868fed5a Close PR #15422; fix loader.conf to reflect new driver support (old
tulip clone NICs merged into if_dc driver).

PR: conf/15422
1999-12-23 05:28:31 +00:00
Bill Paul
c0cdcd0b3e Fix one bug and make one minor enhancement:
- In uhci_intr() check to see if sc->sc_bus.bdev is NULL, and if it is,
  ack any pending interrupts and disable them, then return. It is possible
  for interrupts to be delivered the moment a handler is set up at attach
  time in uhci_pci.c, particularly when attempting to kldload the usb.ko
  module after the system is already up. However the driver isn't ready
  to field interrupts at that time and certain pointers in the softc
  struct aren't initialized yet, and we invariably end up falling off
  the end of one of them. The effect is that kldloading the usb module
  will panic the system in uhci_intr(). This added sanity check stops
  this from happening: I can now kldload the usb.ko module without any
  problems and load/attach other USB drivers after it.

  Of course the uhci driver has no detach method, but that's another
  problem.

- In uhci_run(), set the UHCI_CMD_MAXP bit in the command register to
  allow 64-byte packets to be used for full speed bandwidth reclamation.
  Certain high speed devices (in this case the ADMtek USB ethernet
  adapter) require this bit to be set, otherwise babble errors occur
  at the end of large (between 1100 and 1500 byte) transfers. This
  should not affect other devices, although supposedly it is less efficient
  than the 32-byte setting. Unfortunately, this is a per-bus setting,
  not a per-device setting, so we can't just enable it for certain
  devices on the USB bus.
1999-12-23 05:18:58 +00:00
Greg Lehey
72059427d7 Add dialing code for Limassol, Cyprus. 1999-12-23 00:37:47 +00:00
Greg Lehey
28c12971af Update area codes for Australia.
Update some area codes for Malaysia.  The list is still woefully incomplete.
1999-12-23 00:31:04 +00:00
Brian Somers
abab7303b5 Don't munge ``set dial|login|logout|hangup'' arguments before
ExpandString() has a chance to do its own substitutions.
1999-12-22 21:48:12 +00:00
Andrey A. Chernov
1107842229 lt_LN->la_LN 1999-12-22 20:52:54 +00:00
Andrey A. Chernov
02fdddce34 Add ${WORLDTMP}/sbin to ${STRICTTMPPATH} - sysctl not found otherwise 1999-12-22 20:27:45 +00:00
Mark Murray
1c7d04a82f RIP xntpd. 1999-12-22 19:15:02 +00:00
Yoshinobu Inoue
6a800098cc IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
Poul-Henning Kamp
2e636eed15 Just on the off-chance that somebody might use libdisk in a totally
lobotomized environment, say booted from a floppy with no /etc full
of password and group files, give sensible fallbacks for roots uid
and operators gid.

This might fix sysinstall.
1999-12-22 19:06:29 +00:00
Poul-Henning Kamp
518aacad79 Don't barf on the releasename symlink in the ftp area on make rerelease. 1999-12-22 18:56:14 +00:00
Sheldon Hearn
b3c5295256 Document the current behaviour with respect to the handling of errno.
Approved by:	phk
1999-12-22 17:04:46 +00:00
Joerg Wunsch
440b92f03f Add the "3 syncs" fortune Jordan has been posting in Usenet years ago.
Found by:	Thomas Gellekum <tg@melaten.rwth-aachen.de>
1999-12-22 16:32:28 +00:00
Ollivier Robert
6179f09edb Bye bye xntpd. 1999-12-22 15:24:45 +00:00
Kris Kennaway
f972508889 Say goodbye to some crufty old fortran code.
Reviewed by:	current
1999-12-22 14:30:42 +00:00
Bruce Evans
8f4620bc42 Aargh, the $FreeBSD$ check caused an inconsistent commit by rejecting
this makefile update which should have been together with the file
removal.

Removed vlimit.3 and vtimes.3.  Removed vlimit.c and vtimes.c from
the "MISSING" list.  These were old variants of get/setrlimit() and
getrusage(), respectively, and were never implemented in FreeBSD.
vlimit.3 referred to <sys/vlimit.h> which was removed recently.
vtimes.3 referred to <sys/vtimes.h> which never existed in FreeBSD.
1999-12-22 13:49:14 +00:00
Bruce Evans
cee710e762 Removed vlimit.3 and vtimes.3. Removed vlimit.c and vtimes.c from
the "MISSING" list.  These were old variants of get/setrlimit() and
getrusage(), respectively, and were never implemented in FreeBSD.
vlimit.3 referred to <sys/vlimit.h> which was removed recently.
vtimes.3 referred to <sys/vtimes.h> which never existed in FreeBSD.
1999-12-22 12:24:25 +00:00
Warner Losh
3e356c0cb2 sn driver is no longer using isa_compat layer 1999-12-22 09:40:35 +00:00
Ollivier Robert
12d687966c Don't compile mktime, it is already present elsewhere.
Submitted by:	bde
1999-12-22 09:36:41 +00:00
Warner Losh
00a7524fda New files in sn driver. 1999-12-22 09:30:51 +00:00
Warner Losh
b616727984 Newbusify the driver.
Add support, kinda, for megaheartz xjack nic cards.  This support
works well for one machine per ethernet segment because it hard codes
the MAC address.  The pccardd in -current doesn't have support to
parse the ethernet address from the CIS in the funky way that the
megaheartz card does things (it includes it in the info tuple, as
ascii, which is non-standard).  I'd rather kludge this for the moment
and work to read the CIS from the kernel rather than mess with
pccardd.

The isa attachment is untested.  The pccard attachment is known to
work since I'm committing over it.

Card Obtained from: Chris D. Faulhaber <jedger@fxp.org>
1999-12-22 08:44:13 +00:00
David E. O'Brien
19b132d78b Turn on the sym' driver by default. It lives well beside the ncr' driver
now.  On one machine with <825a> and <875> controllers, `sym' correctly
attached.  On another one with only a <ncr 53c810 fast10 scsi>, the `ncr'
driver correctly attached.
1999-12-22 05:52:04 +00:00