Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
available, in i2c controller drivers that require interrupts for transfers.
This is the result of auditing all 22 existing drivers that attach iicbus.
These drivers were the only ones remaining that require interrupts and were
not using config_intrhook to defer attachment. That has led, over the
years, to various i2c slave device drivers needing to use config_intrhook
themselves rather than performing bus transactions in their probe() and
attach() methods, just in case they were attached too early.
M_PMC is defined in sys/dev/hwpmc/hwpmc_mod.c, and the LINT kernel build
fails when linking with lld due to a duplicate symbol error.
Sponsored by: The FreeBSD Foundation
load and unload it all the time since the buffer never changes. In
addition, we were loading it with a hardware spin lock held, which
makes the sleepable lock in busdma (for the bounce pages) trigger a
witness warning, as well as ipend being called with it held by uart,
which made it impossible to unload.
These differences don't matter with the v4 busdma implementation, but
they do with the v6 implementation since the latter likes to bounce
transactions more, and will always do so for Atmel's driver.
It's more efficient as well as being more correct.
as kernel drivers and their dependency onto mmc(4); this allows for
incrementing the mmc(4) module version but also for entire omission
of these bridge declarations for mmccam(4) in a single place, i. e.
in dev/mmc/bridge.h.
comments, marking unused parameters as such, style(9), whitespace,
etc.
o In the mmc(4) bridges and sdhci(4) (bus) front-ends:
- Remove redundant assignments of the default bus_generic_print_child
device method (I've whipped these out of the tree as part of r227843
once, but they keep coming back ...),
- use DEVMETHOD_END,
- use NULL instead of 0 for pointers.
o Trim/adjust includes.
This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.
This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.
Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785
As cs is stored in a uint32_t, use the last bit to store the
active high flag as it's unlikely that we will have that much CS.
Reviewed by: loos
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8614
When detaching device trees parent devices must be detached prior to
detaching its children. This is because parent devices can have
pointers to the child devices in their softcs which are not
invalidated by device_delete_child(). This can cause use after free
issues and panic().
Device drivers implementing trees, must ensure its detach function
detaches or deletes all its children before returning.
While at it remove now redundant device_detach() calls before
device_delete_child() and device_delete_children(), mostly in
the USB controller drivers.
Tested by: Jan Henrik Sylvester <me@janh.de>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8070
MFC after: 2 weeks
where possible. In the places that doesn't work (multi-line inline asm,
and places where the old armv4 cpufuncs mechanism is used), annotate the
accesses with a comment that includes SCTLR. Now a grep -i sctlr can find
all the system control register manipulations.
No functional changes.
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
This allow us to boot FreeBSD kernel (using uImage encapsulation) directly
from U-boot using 'bootm' command or by Android fastboot loader.
For now, kernel uImage must be marked as Linux, but we can add support for
FreeBSD into U-Boot later.
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc. This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).
(Thanks to jilles@ for providing the vital clue about the kernel linker.)
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
problem affects revision 1xx hardware as well as later versions. Also, the
recommended workaround is to set the PDC count register for a 12-byte
transfer when the actual size is less than that, but there is no need to
extend or zero-out the data buffer, because the blklen register contains
the real transfer size and only that many bytes will be transferred.
Also add a sysctl to turn debugging printfs on or off on the fly.
"rmii", use rmii mode for the MAC, otherwise use MII mode. The code is
somewhat duplicated between these drivers for this.
Also, add AT91RM9200 compatibility strings to the ate driver. In the
future, there's a good chance that ate will lose the MACB support and
only attach to the AT91RM9200 EMAC device since the macb works now
that RMII support has been added to it.
driver. This is taken from the MAC at boot, but can be overridden with
'options AT91_MACB_USE_RMII'.
Switch to macb for HL201 and SAM9G20EK boards. It now works both
places. Also start to sneak up on FDT for the SAM9G20EK board, but
leave disabled due to issues with MMC that haven't been resolved.
Add early debug support for the SAM9G20EK since that is required
for FDT to work presently on these SoC.
initial thread stack is not adjusted by the tunable, the stack is
allocated too early to get access to the kernel environment. See
TD0_KSTACK_PAGES for the thread0 stack sizing on i386.
The tunable was tested on x86 only. From the visual inspection, it
seems that it might work on arm and powerpc. The arm
USPACE_SVC_STACK_TOP and powerpc USPACE macros seems to be already
incorrect for the threads with non-default kstack size. I only
changed the macros to use variable instead of constant, since I cannot
test.
On arm64, mips and sparc64, some static data structures are sized by
KSTACK_PAGES, so the tunable is disabled.
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
If KSTACK_PAGES was changed to anything alse than the default,
the value from param.h was taken instead in some places and
the value from KENRCONF in some others. This resulted in
inconsistency which caused corruption in SMP envorinment.
Ensure all places where KSTACK_PAGES are used the opt_kstack_pages.h
is included.
The file opt_kstack_pages.h could not be included in param.h
because was breaking the toolchain compilation.
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3094
