so the module could be loaded.
Discussed with: andrew
Reviewed by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D6359
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
The A83T thermal sensor controller has three sensors. Sensor 0 corresponds
to CPU cluster 0, sensor 1 to CPU cluster 1, and sensor 2 to the GPU. This
driver exports the temperature sensor readings via sysctl.
Calibration data is obtained from SRAM found in the Secure ID module.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D6378
The RSB controller speaks a simplified two wire protocol at speeds up to
20MHz. It is used on sun8i and sun9i family SoCs to communicate with
power management ICs.
RSB isn't really I2C or SMBus, but the driver exposes an iicbus interface
to simplify power management IC drivers (which may need to support both
RSB and I2C connectivity).
- Introduce new OF API function OF_prop_free to free memory allocated by
OF_getprop_alloc and OF_getencprop_alloc. Current code just calls free(9)
with M_OFWPROP memory class which assumes knowledge about OF_*prop_alloc
functions' internals and leads to unneccessary code coupling
- Convert some of the free(..., M_OFWPROP) instances to OF_prop_free
Files affected by this commit are the ones I was able to test on real
hardware. The rest of free(..., M_OFWPROP) instances will be handled with
idividual maintainers
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D6315
Current API assumes that "gpios" property belongs to the device's node but for
some binding it's not true: gpiokeys has set of child nodes with this property.
Patch adds new argument instead of replacing device_t because device_t will be
used to track ownership for allocated pins
Reviewed by: mmel
Differential Revision: https://reviews.freebsd.org/D6277
This function works with all smp non-multicluster allwinner SoC (A20, A31, A31S and H3).
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D6269
Note that the updated comment is valid only for INTRNG. This should not
be a problem as not INTRNG code is left in place for debugging reasons
only and should not be used anymore. It's anticipated that this old
code will be removed soon.
- Hardcode '8' instead of NBBY in _BITSET_BITS.
- Define a private version of 'howmany' for use in __bitset_words().
- While here, move a few more things out of _bitset.h and _cpuset.h to
bitset.h and cpuset.h, respectively. The only things left in
_bitset.h and _cpuset.h are the bits needed to define a bitset
structure.
Reviewed by: bde, kib (ish)
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are
supported. Note that the A83T contains two clusters of four Cortex-A7
CPUs, and only CPUs in first cluster are started for now.
Tested on a Sinovoip Banana Pi BPI-M3.
The datasheets refer to this controller as EMAC, not to be confused with
the fast ethernet controller (also named EMAC) found in A10/A20 SoCs.
Tested on a BananaPi M3 (A83T), which uses an external RGMII PHY (RTL8211E).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D6169
Add the needed hardcoded gem5 attachments for the UART there, re-using all
the other bits.
In collaboration with: andrew
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6204
In case we do not have an interrupt assignment for the virtual timer,
force the physical timer.
Also skip resource allocation for any timer we do not have an interrupt
assignment for.
In collaboration with: andrew
Submitted by: br ([1] from his gem5 arm64 work)
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6203
In case of updating it with a very low value it might expire again
after writing the tval but before updating ctrl. In that case we do
lose the status bit saying that the timer expired and we will consequently
not get an interrupt for it, leaving the timer in a "dead" state.
In order to solve this increase the minimum period with what the timer
can be loaded to something higher.
Found & analysed with: gem5
Debugged with: andrew
Sponsored by: DARPA/AFRL
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6202
implementations. Early in the boot the kernel will use an approximate,
however after the timer has been probed it will switch to a more accurate
implementation.
Reviewed by: manu
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5762
Split ADC driver in two halves: ADC(analog ot digital) and
TSC(touchscreen). Touchscreen driver is fully functional
up to the point of reporting samples. This part will be added
once FreeBSD has API for touchscreen.
Tested on: Beaglebone Black + 4DCAPE-43T
Reviewed by: loos
Differential Revision: https://reviews.freebsd.org/D5847
On ARM, we can directly switch between translation tables only when
the size of the mapping for any given virtual address is the same in
the old and new translation tables. The load of new TTB and subsequent
TLB flush is not atomic operation. So speculative page table walk can
load TLB entry from new mapping while rest of TLB entries are still the
old ones. In worst case, this can lead to situation when TLB cache can
contain multiple matching TLB entries. One (from old mapping) L2 entry
for VA + 4k and one (from new mapping) L1 entry for VA.
Thus, we must switch to kernel pmap translation table as intermediate
mapping because all sizes of these (old pmap and kernel pmap) mappings
are same (or unmapped). The same is true for switch from kernel pmap
translation table to new pmap one.
Set MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA based on the "bus-width"
DT property and reduce maximum bus frequency from 52MHz to 50MHz to match
the capabilities of the clock provider.
Tested on a BananaPi BPI-M3 (A83T).
Such situation is defined as UNPREDICTABLE by arm arm manual.
This patch fixes all explicit TLB fetches which could cause this issue
and speculative TLB fetches for sections mapped in user address space.
Speculative TLB fetches for sections mapped in kernel address space are
not fixed yet as the break-before-make approach must be implemented for
kernel mappings too. This means that promoted/demoted section will be
unmapped for a while. Either kernel stack the promotion/demotion is
being done on or L1 page table(s) which must be modified may be mapped
by this section. Thus the fix will not be so simple like for userland
mappings.
The issue was detectable only on Cortex-A8 platforms and only very
rarely. It was reported few times. First, it was by Mikael Urankar
in June 2015. He helped to identify the mechanism of this issue, but
we were not sure how to fix it correctly until now.
PR: 208381
Reported by: Mikael Urankar (mikael.urankar at gmail.com)
Reviewed by: kib
and R/W emulation aborts under pmap lock.
There were two reasons for using of atomic operations:
(1) the pmap code is based on i386 one where they are used,
(2) there was an idea that access and R/W emulation aborts should be
handled as quick as possible, without pmap locking.
However, the atomic operations in i386 pmap code are used only because
page table entries may be modified by hardware. At the beginning, we
were not sure that it's the only reason. So even if arm hardware does
not modify them, we did not risk to not use them at that time. Further,
it turns out after some testing that using of pmap lock for access and
R/W emulation aborts does not bring any extra cost and there was no
measurable difference. Thus, we have decided finally to use pmap lock
for all operations on page table entries and so, there is no reason for
atomic operations on them. This makes the code cleaner and safer.
This decision introduce a question if it's safe to use pmap lock for
access and R/W emulation aborts. Anyhow, there may happen two cases in
general:
(A) Aborts while the pmap lock is locked already - this should not
happen as pmap lock is not recursive. However, under pmap lock only
internal kernel data should be accessed and such data should be mapped
with A bit set and NM bit cleared. If double abort happens, then
a mapping of data which has caused it must be fixed.
(B) Aborts while another lock(s) is/are locked - this already can
happen. There is no difference here if it's either access or R/W
emulation abort, or if it's some other abort.
Reviewed by: kib
(PL1) and unprivileged (PL0) read/write access. As cp15 virtual to
physical address translation operations are used, interrupts must be
disabled to get consistent result when they are called.
These functions should be used only in very specific occasions like
during abort handling or kernel debugging. One of them is going to be
used in pmap_fault(). However, complete function set is added. It cost
nothing, as they are inlined.
While here, fix comment of #endif.
Reviewed by: kib
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
bcm2835_mbox_fb_init sets configuration so SET_VIRTUAL_OFFSET should be used
instead of GET_VIRTUAL_OFFSET
Submitted by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
VideoCore reports garbage in viewport geometry fields unless
viewport was set previously by earlier stage boot loader. So
when booting FreeBSD kernel directly from VideoCore's start.elf
framebuffer intialization fails due to invalid vxres, vyres
values. Make sure we request viewport to be equal to physical
resolution
Submitted by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
write to the End of Interrupt (EOI) register before handling the interrupt.
This should be a noop as it will be set for all edge triggered interrupts,
however this will not be the case for MSI interrupts. These are also edge
triggered, however we should not write to the EOI register until later in
arm_gic_pre_ithread.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
support MSI and MSI-X interrupts, however intrng needs updates before this
can happen.
For now we just attach the driver until the MSI API is ready.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5950
- Pre-buffer audio data to VideoCore so there are no audible glitches when
driver is too late to provide samples
- Start actual playback when there is some prebuffered audio,
it fixes audible noisy click in the beginning of playback
- Use #defines instead of hardcoded values where appropriate
- Fix copy-pasted comment
PR: 208678
value that can't ever be in an inconsistant intermediate state even when
some other thread is in the middle of writing the value/register.
Locking of the hardware remains in the few places that do r-m-w operations.
Locking of metadata access is restricted to places using memcpy or sprintf
to modify the metadata.
oddly separated from related functionality. This just moves some blocks
of code around so that setup_intr and teardown_intr are near each other
again, and likewise for enable/disable_intr. No functional changes.
The PLL_X, base CPU frequency source, doesn't have a bypass switch and thus
we must use another frequency source for CPU while changing its frequency.
PLL_P is ideal for this, it runs at 480MHz and CPU can be clocked at this
frequency at any CPU voltage.
many SoCs these two are the same, however there is no requirement for this
to be the case, e.g. on the ARM Juno we boot on what the GIC thinks of as
CPU 2, but FreeBSD numbers it CPU 0.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
a child of it. This is done in conformity with Linux dts files and
as preparation for rework of BCM2836 interrupt controller for INTRNG.
Reviewed by: gonzo
Differential Revision: https://reviews.freebsd.org/D5807
universal.
(1) New struct intr_map_data is defined as a container for arbitrary
description of an interrupt used by a device. Typically, an interrupt
number and configuration relevant to an interrupt controller is encoded
in such description. However, any additional information may be encoded
too like a set of cpus on which an interrupt should be enabled or vendor
specific data needed for setup of an interrupt in controller. The struct
intr_map_data itself is meant to be opaque for INTRNG.
(2) An intr_map_irq() function is created which takes an interrupt
controller identification and struct intr_map_data as arguments and
returns global interrupt number which identifies an interrupt.
(3) A set of functions to be used by bus drivers is created as well as
a corresponding set of methods for interrupt controller drivers. These
sets take both struct resource and struct intr_map_data as one of the
arguments. There is a goal to keep struct intr_map_data in struct
resource, however, this way a final solution is not limited to that.
(4) Other small changes are done to reflect new situation.
This is only first step aiming to create stable interface for interrupt
controller drivers. Thus, some temporary solution is taken. Interrupt
descriptions for devices are stored in INTRNG and two specific mapping
function are created to be temporary used by bus drivers. That's why
the struct intr_map_data is not opaque for INTRNG now. This temporary
solution will be replaced by final one in next step.
Differential Revision: https://reviews.freebsd.org/D5730
separate driver. Add support for activating clock and hwreset resources
for these devices when the EXT_RESOURCES option is present.
Reviewed by: andrew, mmel, Emmanuel Vadot <manu@bidouilliste.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5749
This driver works in PIO mode for now, interrupts are available only when
FIFO is enabled. The FIFO cannot be used with arbitrary sizes which defeat
its general use.
At some point we can add DMA transfers where the FIFO can be more useful.
Tested on uBMC (microBMC) and BBB.
Sponsored by: Rubicon Communications (Netgate)
different ID space than the kernel. Because of this we need to read the
ID from the hardware. The hardware will provide this value to the CPU by
reading any of the first 8 Interrupt Processor Targets Registers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5706
- in atags
- in DT blob (by using 'fdt chosen' U-Boot command)
The command line must start with guard's string 'FreeBSD:' and can contain
list of comma separated kenv strings. Also, boot modifier strings from
boot.h are recognised and parsed into boothowto.
The command line must be passed from U-Boot by setting of bootargs variable:
'setenv bootargs FreeBSD:boot_single=1,vfs.root.mountfrom=ufs:/dev/ada0s1a'
followed by 'fdt chosen' (only for DT based boot)
- Don't convert atags address passed from U-Boot. It's real physical
address (and we have 1:1 mapping).
- Size of tags is encoded in words, not in bytes
This allow us to boot FreeBSD kernel (using uImage encapsulation) directly
from U-boot using 'bootm' command or by Android fastboot loader.
For now, kernel uImage must be marked as Linux, but we can add support for
FreeBSD into U-Boot later.
controller IPI provider.
New struct intr_ipi is defined which keeps all info about an IPI:
its name, counter, send and dispatch methods. Generic intr_ipi_setup(),
intr_ipi_send() and intr_ipi_dispatch() functions are implemented.
An IPI provider must implement two functions:
(1) an intr_ipi_send_t function which is able to send an IPI,
(2) a setup function which initializes itself for an IPI and
calls intr_ipi_setup() with appropriate arguments.
Differential Revision: https://reviews.freebsd.org/D5700
a DRIVER_MODULE() referencing mmc_driver has a MODULE_DEPEND() on mmc. This
is because the kernel linker only searches for symbols in dependent modules,
so loading sdhci_pci (and other bus-flavors of sdhci) would fail when mmc
was not compiled into the kernel (even if you hand-loaded mmc first).
(Thanks to jilles@ for providing the vital clue about the kernel linker.)
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
We changed the ABI for ARM in 10, an removed support for the old ABI in 11,
as such binaries from these releases are unable to be run on a head kernel.
Reviewed by: bz, emast
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5652
r296861 addressed a build failure due to undefined SYS_freebsd6_lseek
by adding a COMPAT_FREEBSD6 conditional, but we do not support FreeBSD 6
compatibility on armeb anyway so remove it completely.
Reviewed by: andrew, bz
Differential Revision: https://reviews.freebsd.org/D5643
the ABI in 10.0, and have removed support for the old ABI in 11. As such
any of these options to provide compatibility prior to 10 are unneeded.
Sponsored by: ABT Systems Ltd
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.
Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.
This commit provides attachment of xhci-platform for A38X boards, making
it possible to mount FreeBSD world from USB3.0 flash. 'xhci' device was
added to files.mv (as optional) and kernconf of Armada38x was enhanced.
It was also necessary to open programmable memory windows of USB3.0.
fdt_win_setup needed improvement so it's able to traverse through
children of internal-regs node.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: hselasky
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5031
After ARM_INTRNG introduction, MPIC code needed several modifications:
- IRQ resource and its handler added
- several DEVMETHODs of INTRNG interface implemented
- defines enhanced to ensure code compiles as well for AXP as for A38X
- added dummy MSI_IRQ, ERR_IRQ defines for Armada38x
- MPIC driver was added to files.armada38x, ARM_INTRNG option enabled in
kernconf file and regs of MPIC corrected in dts file.
Instead of modifying Armada38X DTS, offsets to CPU registers defined in
driver were changed. That required restoring 'reg' property of mpic node
in ArmadaXP to state compliant with Linux DTS.
Additionally, required ARM_INTRNG definitions were added to mv_common.c.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian, andrew, ian, skra
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5030
code for the A20 to use the new PLATFORM_SMP interface, and extends it to
add support for the new SoCs allowing for both to coexist within the same
kernel.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
Differential Revision: https://reviews.freebsd.org/D5342
adds a lock to ensure only a single device is accessing the hardware. A
reference count is added to only enable when we start to use the clock,
and to disable after we have finished needing the clock.
This was extracted from a larger review to add OHCI support to the
Allwinner SoCs.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
X-Differential Revision: https://reviews.freebsd.org/D5481
Very similar to the A10 RTC controller with a few register offsets changed
and a different location for the LOSC switch status.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5500
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
is the physical memory size so may be larger than a u_long can hold, e.g.
on ARM with LPAE we could see an address space of up to 40 bits. On ARM
u_long is only 32 bits so the memory size will be truncated, possibly to
zero.
Reported by: bz
Sponsored by: ABT Systems Ltd
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
Use u_long instead of uint32_t variables to avoid overflow
in case of PA space bigger than 32-bit.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: andrew, br, wma
Differential revision: https://reviews.freebsd.org/D5393
different methods to start the secondary cores in a kernel built for
multiple SoCs, e.g. with the Allwinner A20 and A31.
Sponsored by: ABT systems Ltd
Differential Revision: https://reviews.freebsd.org/D5466
Newer Allwinner MMC implementations use a different FIFO register offset
(0x200 instead of 0x100). Since the FDT uses the same compat string for
both cases, base the decision on which FIFO offset to use on the Allwinner
SoC family.
Reviewed by: Emmanuel Vadot <manu@bidouilliste.com>
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5468
the interrupt framework is also going to be used by another (MIPS)
architecture. IPI implementations may vary much across different
architectures.
An IPI implementation should still define INTR_IPI_COUNT and use
intr_ipi_setup_counters() to setup IPI counters which are inside of
intrcnt[] and intrnames[] arrays. Those are used for sysctl and ddb.
Then, intr_ipi_increment_count() should be used to increment obtained
counter.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D5459
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370
intr_pic_init_secondary. Replace them with a direct call. On BCM2836
and ARMADA XP we need to add this function, but it can be empty.
Reviewed by: ian, imp
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5460
slightly wrong on the others. We should just check if mp_ncpus is set to
more than one CPU as we may wish to run on a single core even when SMP is
available.
Reviewed by: ian
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5458
support for the i2c, mmc, and gmac clocks. Further clocks can be added as
needed.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed by: jmcneill
Differential Revision: https://reviews.freebsd.org/D5339
The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
driver. This mostly involves selecting the register offsets to use at
runtime based on the hardware we are talking to.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5327
will be needed when we bring in further support for these SoCs.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5340
For sources and destinations marked "noincr", the previous code was
incorrectly programming the dedicated DMA channel control register
using bit definitions for normal DMA channels. This code path is not
currently used, but will be used by the HDMI audio driver in review.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5382
Linux-driven changes to the way the chip's two interrupt controllers are
defined (we only support one of them) led to no interrupt processing, so
the system would hang after device instantiation. This workaround just
rewrites the FDT data on the fly to get interrupt handling back under the
control of the main GIC device.
If/when we ever support deep sleep modes that involve powering down the
main GIC, we'll have to undo this change, write a driver for the GPC-PIC,
and somehow manage the handoff of responsibilities between the two drivers
as the chip transitions in/out of deep sleep mode.
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.
In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
FDT platform code to detect when we are booting on one of these SoCs. The
driver changes will be added shortly.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5338
or pte-v6.h in files which needs it.
There are quite internal definitions in pte-v4.h and pte-v6.h headers
specific for corresponding pmap implementation. These headers should be
included only in very few files and an intention is to not hide for
which implementation such files are.
Further, sys/arm/arm/elf_trampoline.c is an example of file which
uses armv4 like pmap implementation for both armv4 and armv6 platforms.
This is another reason why pte.h which includes specific header
according to __ARM_ARCH is not created.
Create new pmap.h which includes specific header according to
__ARM_ARCH.
Note that <machine/pmap.h> is included from <vm/pmap.h> so one common
<machine/pmap.h> must exist.
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
are not utilized there. Only domain #0 is used and there is no reference
to it in the whole pmap-v6.c. Thus initialize domain access register in
locore-v6.c without reference too.
Before this change all mappings done by this function were executable
as pte entries have NOT EXECUTABLE bit.
The function is used only for static device mappings at present. Thus
this is also a fix as DEVICE memory should not be mapped as executable.
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
am335x_prcm driver which uses it. Used BUS_PASS_BUS is a quick pick
for now and may be revised when other drivers start using multipass
feature.
This is needed after an update of Linux dts files done in r295436.
(1) The channel mask is get from "brcm,dma-channel-mask" property of
dma node, and if not provided, from "broadcom,channels" property.
(2) Consequently, sdhci driver does not allocate any specific channel.
(3) Use CS_RESET bit for initial channel reset.
Differential Revision: https://reviews.freebsd.org/D4303
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
with this and an Allwinner SoC to power off.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4954
