1. Fixups are always done on 512 byte chunks (in stead of sectors). This
is kind of stupid.
2. Conevrt between NTFS blocknumbers (the blocksize equals the media
sector size) and the bread() and getblk() blocknr (which are 512-byte
sized)
NB: this change should not affect ntfs for 512-byte sector sizes.
excluded, as it's used by MI code) and mode the sysctl variables from
pcpu_stats to pcpu_md.
Adjust all references accordingly.
While nearby, change the PCPU sysctl tree so that they match the CPU
device sysctl tree -- they are now children of a static node called
"machdep.cpu" and are named only with their cpu ID.
Because several applications in /bin use libulog (or may use it in the
nearby future), it must not live inside /usr. It seems like we don't
need to add the copy from /usr/lib to ObsoleteFiles.inc, because it's
cleaned up during installation of libulog automatically.
Reported by: ume
allocating MAXCPU VHPTs up-front. This allows us to max-out MAXCPU
without memory waste -- MAXCPU is now 32 for SMP kernels.
This change also eliminates the VHPT scaling based in the total
memory in the system. It's the workload that determines the best size
of the VHPT. The workload can be affected by the amount of memory,
but not necessarily. For example, there's no performance difference
between VHPT sizes of 256KB, 512KB and 1MB when building the LINT
kernel. This was observed with a system that has 8GB of memory.
By default the kernel will allocate a 1MB VHPT. The user can tune the
system with the "machdep.vhpt.log2size" tunable.
of setenv(), putenv() and unsetenv() when dealing with corrupt entries in
environ. They now output a warning and complete their task without error.
MFC after: 1 week
instead of returning an error if a corrupt (not a "name=value" string) entry
in the environ array is detected when (re)-building the internal
environment. This should prevent applications or libraries from
experiencing issues arising from the expectation that these calls will
complete even with corrupt entries. The behavior is now as it was prior to
7.0.
Reviewed by: jilles
MFC after: 1 week
find a variable. Include a note that it must not cause the internal
environment to be generated since malloc() depends upon getenv(). To call
malloc() would create a circular dependency.
Recommended by: green
Approved by: jilles
MFC after: 1 week
The ulog_login_pseudo(3) and ulog_logout_pseudo(3) interfaces provide a
functionality identical to what libutempter has to offer. Just transform
libutempter's calls into the before mentioned functions.
libutempter doesn't work with utmpx, so instead of fixing I thought the
easiest way would be to integrate this functionality. libutempter is
used by applications like xterm and the KDE libraries, so if I ever
change the underlying file format, these applications will keep working
automatically.
Also increase __FreeBSD_version to indicate the addition (as well as the
import of libulog).
it seems that now it is necessary for 'forward' to work outside lo0.
The bug (and fix) was reported on 8.0. This patch probably applies
to RELENG_7 as well.
It seems that 'pf' has a similar bug.
Submitted by: Lytochkin Boris
MFC after: 3 days
cleanilinks wasn't listed in <bsd.subdir.mk>. Instead of adding it to
/sys/modules/Makefile, we'd better just add it to <bsd.subdir.mk>
directly, so we don't need to change files like /sys/modules/sound/Makefile
as well. This means you can finally clean up all those dangling symlinks
created by individual module compilation at once.
MAXLOGNAME seems more applicable in this case, because UT_NAMESIZE
refers to the username field in utmp files, which is clearly unrelated
to repquota(8).
The size of the username record in utmp files should not influence the
maximum username length. Right now ut_user/ut_name is big enough, so in
this case it's dead code anyway.
We don't have UT_*SIZE anymore. One of the reasons for that is because
all strings are null terminated, there is no need for apps to copy
strings out of the utmpx structure. This means we can define W_DISP*SIZE
lengths for all columns.
While there, adjust the sizes a little. Steal some bytes from the
username column, while extending the hostname column quite a bit.
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this options deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.
As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.atapi_dma tunable work again.
Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.
Submitted by: nwitehorn (powerpc part)
unless pipe is idle. This should fix follwing issues:
- 'dummynet: OUCH! pipe should have been idle!' log messages.
- exceeding configured pipe bandwidth.
MFC after: 1 week
(Un)fortunately there is no standardized interface to switch between
utmp database files, so we must call ulog_setutxfile() here.
I'm also changing the column widths to magic numbers here. Display
layout should in this case not be derived from structure fields sizes.
Because I don't want struct utmpx ever to become too small, the fields
are too big to reserve all the space.
both to not panic when fsync(2) is called for fifo on zfs
filedescriptor, and to actually fsync fifo inode to permanent storage.
PR: kern/141177
Reviewed by: pjd
MFC after: 1 week
logwtmp() gets called with the raw strings that are written to disk. For
regular user entries, this isn't too bad, but when booting/shutting
down, the contents get rather cryptic.
Just call the standardized pututxline().
Because our implementation guarantees the strings inside struct utmpx to
be null terminated, we don't need to copy everything out, which makes
the code nicer to read.
Also set WARNS to 6 and add $FreeBSD$ to keep SVN happy.
for attaching when there is no metadata yet.
Before r200125 the order of looking for providers was wrong. It was:
1. Find provider by name.
2. Find provider by guid.
3. Find provider by name and guid.
Where it should have been:
1. Find provider by name and guid.
2. Find provider by guid.
3. Find provider by name.
MFC after: 1 week
Because our implementation guarantees the strings inside struct utmpx to
be null terminated, we don't need to copy everything out, which makes
the code nicer to read.
Also set WARNS to 6 and add $FreeBSD$ to keep SVN silent.
- Just like struct utmp, store strings inside struct utmpx itself. This
is needed to make things like pututxline() work.
- Add ut_id and ut_pid fields, even though they have little use in our
implementation.
- It turns out our "reboot" wtmp entries indicate a system boot, so
remove REBOOT_TIME
- Implement getutxline() and pututxline
- Add getutxuser() and setutxfile(), which allows us to crawl wtmp and
lastlog files as well.
- Add _ULOG_POSIX_NAMES, so we can already use the POSIX names if we
really want to.
The maximum length of a username has nothing to do with the size of the
username in the utmp files. Use MAXLOGNAME, which is defined as 17
(UT_USERSIZE + 1).
The entries in the argv array are not const themselves, but sometimes we
want to fill in const values. Just make the array const and use
__DECONST() to make it const for the execve()-call itself.
Also convert the only K&R prototype to ANSI.
calling scrub when pool is in a degraded state. It will try to taste ZVOLs,
which will lead to deadlock, as ZVOL will try to acquire the same locks as
replace/scrub is holding already.
We can't simply skip provider based on their GEOM class, because ZVOL can have
providers build on top of it and we need to skip those as well.
We do it by asking for ZFS::iszvol attribute. Any ZVOL-based provider will give
us positive answer and we have to skip those providers.
This way we remove possibility to create ZFS pools on top of ZVOLs, but it is
not very useful anyway.
I believe deadlock is still possible in some very complex situations like when
we have MD provider on top of UFS file on top of ZVOL. When we try to replace
dead component in the pool mentioned ZVOL is based on, there might be a
deadlock when ZFS will try to taste MD provider. There is no easy way to detect
that, but it isn't very common.
MFC after: 1 week
normal in case of media read error and some ATAPI cases, when transfer size
is unknown beforehand. PCI ATA BM specification tells that in case of such
underrun driver should just manually stop DMA engine. DMA engine should
same time guarantie that all bus mastering transfers completed at the moment
of driver reads interrupt flag asserted.
This change should fix interrupt storms and command timeouts in many cases.
PR: kern/103602, sparc64/121539, kern/133122, kern/139654
