Commit Graph

2254 Commits

Author SHA1 Message Date
Luoqi Chen
c71d557034 IO apics are not necessarily page aligned, they are only required to be aligned
on 1K boundary. Correct a typo that would cause problem to a second IO apic.

Pointed out by:	Steve Passe	<smp.csn.net>
2000-04-20 14:40:11 +00:00
Poul-Henning Kamp
ed6aff7387 Remove unneeded <sys/buf.h> includes.
Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.
2000-04-18 15:15:39 +00:00
Mike Smith
300451c472 Some more i386-only BIOS-friendliness:
- Add support for using the PCI BIOS functions for configuration space
   accesses, and make this the default.

 - Make PNPBIOS the default (obsoletes the PNPBIOS config option).

 - Add two new boot-time tunables to disable each of the above.
2000-04-16 20:48:33 +00:00
Jeroen Ruigrok van der Werven
aec5a3b342 Fix typo, extentions -> extensions
Submitted by:	George Cox <gjvc@sophos.com>
2000-04-15 18:46:15 +00:00
Poul-Henning Kamp
8177437d85 Complete the bio/buf divorce for all code below devfs::strategy
Exceptions:
        Vinum untouched.  This means that it cannot be compiled.
        Greg Lehey is on the case.

        CCD not converted yet, casts to struct buf (still safe)

        atapi-cd casts to struct buf to examine B_PHYS
2000-04-15 05:54:02 +00:00
Warner Losh
0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
Hellmuth Michaelis
afb8931fa8 Remove obsolete reference to PCVT_FREEBSD. 2000-04-04 13:14:43 +00:00
Mike Smith
48bb080006 Remove the !(I386 & SMP) tests; we don't run SMP on an i386 system, and
they break the LINT build.
2000-04-03 06:02:00 +00:00
Matthew Dillon
7c8fdcbd19 Make the sigprocmask() and geteuid() system calls MP SAFE. Expand
commentary for copyin/copyout to indicate that they are MP SAFE as
    well.

Reviewed by: msmith
2000-04-02 17:52:43 +00:00
Poul-Henning Kamp
c244d2de43 Move B_ERROR flag to b_ioflags and call it BIO_ERROR.
(Much of this done by script)

Move B_ORDERED flag to b_ioflags and call it BIO_ORDERED.

Move b_pblkno and b_iodone_chain to struct bio while we transition, they
will be obsoleted once bio structs chain/stack.

Add bio_queue field for struct bio aware disksort.

Address a lot of stylistic issues brought up by bde.
2000-04-02 15:24:56 +00:00
Peter Wemm
255108f385 Make sysv-style shared memory tuneable params fully runtime adjustable
via sysctl.  It's done pretty simply but it should be quite adequate.
Also move SHMMAXPGS from $machine/include/vmparam.h as the comments that
went with it were wrong... we don't allocate KVM space for the pages so
that comment is bogus..  The only practical limit is how much physical
ram you want to lock up as this stuff isn't paged out or swap backed.
2000-03-30 07:17:05 +00:00
KATO Takenori
61b64fdb1e PC-98 BIOS copies the DX register into its work area. The value of it
shows `CPUID' and it is useful to identify CPU.  So, it is copied from
BIOS work area to the cpu_id variable (PC-98 only).

Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-29 13:45:40 +00:00
Matthew Dillon
bd5caafc4d The SMP cleanup commit broke need_resched, this fixes that and also
removed unncessary MPLOCKED and 'lock' prefixes from the interrupt
    nesting level, since (A) the MP lock is held at the time, and (B) since
    the neting level is restored prior to return any interrupted code
    will see a consistent value.
2000-03-29 06:15:43 +00:00
KATO Takenori
91cb959ddb Added indirect pio into the bus space stuff for the NEC PC-98. bus.h
includes one of bus_at386.h and bus_pc98.h. Becuase only bus_pc98.h
supports indirect pio and bus_at386.h is identical to old bus.h, there
is no functional change in PC-AT's kernels.  That is, it cannot cause
performance loss.

Submitted by:	nyan
Reviewed by:	imp
bde and luoqi provided useful comments for earlier version.
2000-03-29 03:15:22 +00:00
Matthew Dillon
db6a426158 The SMP cleanup commit broke UP compiles. Make UP compiles work again. 2000-03-28 18:06:49 +00:00
Matthew Dillon
36e9f877df Commit major SMP cleanups and move the BGL (big giant lock) in the
syscall path inward.  A system call may select whether it needs the MP
    lock or not (the default being that it does need it).

    A great deal of conditional SMP code for various deadended experiments
    has been removed.  'cil' and 'cml' have been removed entirely, and the
    locking around the cpl has been removed.  The conditional
    separately-locked fast-interrupt code has been removed, meaning that
    interrupts must hold the CPL now (but they pretty much had to anyway).
    Another reason for doing this is that the original separate-lock for
    interrupts just doesn't apply to the interrupt thread mechanism being
    contemplated.

    Modifications to the cpl may now ONLY occur while holding the MP
    lock.  For example, if an otherwise MP safe syscall needs to mess with
    the cpl, it must hold the MP lock for the duration and must (as usual)
    save/restore the cpl in a nested fashion.

    This is precursor work for the real meat coming later: avoiding having
    to hold the MP lock for common syscalls and I/O's and interrupt threads.
    It is expected that the spl mechanisms and new interrupt threading
    mechanisms will be able to run in tandem, allowing a slow piecemeal
    transition to occur.

    This patch should result in a moderate performance improvement due to
    the considerable amount of code that has been removed from the critical
    path, especially the simplification of the spl*() calls.  The real
    performance gains will come later.

Approved by: jkh
Reviewed by: current, bde (exception.s)
Some work taken from: luoqi's patch
2000-03-28 07:16:37 +00:00
Matthew Dillon
7c58e473f5 Commit the buffer cache cleanup patch to 4.x and 5.x. This patch fixes a
fragmentation problem due to geteblk() reserving too much space for the
    buffer and imposes a larger granularity (16K) on KVA reservations for
    the buffer cache to avoid fragmentation issues.  The buffer cache size
    calculations have been redone to simplify them (fewer defines, better
    comments, less chance of running out of KVA).

    The geteblk() fix solves a performance problem that DG was able reproduce.

    This patch does not completely fix the KVA fragmentation problems, but
    it goes a long way

Mostly Reviewed by: bde and others
Approved by: jkh
2000-03-27 21:29:33 +00:00
Dan Moschuk
6ad9d70260 Include a space between hash ('#') and 'Berkeley packet filter' like
all the other comments have.
2000-03-21 17:00:58 +00:00
Poul-Henning Kamp
91266b96c4 Isolate the Timecounter internals in their own two files.
Make the public interface more systematically named.

Remove the alternate method, it doesn't do any good, only ruins performance.

Add counters to profile the usage of the 8 access functions.

Apply the beer-ware to my code.

The weird +/- counts are caused by two repocopies behind the scenes:
	kern/kern_clock.c -> kern/kern_tc.c
	sys/time.h -> sys/timetc.h
(thanks peter!)
2000-03-20 14:09:06 +00:00
Poul-Henning Kamp
21144e3bf1 Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new
field in struct buf: b_iocmd.  The b_iocmd is enforced to have
exactly one bit set.

B_WRITE was bogusly defined as zero giving rise to obvious coding
mistakes.

Also eliminate the redundant struct buf flag B_CALL, it can just
as efficiently be done by comparing b_iodone to NULL.

Should you get a panic or drop into the debugger, complaining about
"b_iocmd", don't continue.  It is likely to write on your disk
where it should have been reading.

This change is a step in the direction towards a stackable BIO capability.

A lot of this patch were machine generated (Thanks to style(9) compliance!)

Vinum users:  Greg has not had time to test this yet, be careful.
2000-03-20 10:44:49 +00:00
Martin Cracauer
cce9dd21c1 Exchange numerical values for FPE_INTDIV and FPE_INTOVF, so that they
are compatible with the older ones implemented in FreeBSD 3.x.

PR:		15488
2000-03-20 10:22:19 +00:00
Peter Wemm
4e64b0d320 Document and supply COMPAT_OLDPCI and COMPAT_OLDISA so 'make release'
still works.
2000-03-19 13:33:26 +00:00
Peter Wemm
80060e8897 Connect the ISA and PCI compatability shims to an option. In this case
it's options COMPAT_OLDISA and COMPAT_OLDPCI.  This is meant to be a
fairly strong incentive to update the older drivers to newbus, but doesn't
(quite) leave anybody hanging with no hardware support.  I was talking with
a few folks and I was encouraged to simply break or disable the shims but
that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
Nick Hibma
e2dbd15f2e Please welcome the URio driver. Written by
Iwasa Kazmi <kzmi\@ca2.so-net.ne.jp>
2000-03-16 09:16:14 +00:00
Poul-Henning Kamp
db5f635acc Eliminate the undocumented, experimental, non-delivering and highly
dangerous MAX_PERF option.
2000-03-16 08:51:55 +00:00
Bruce Evans
311b554beb Disabled the optimization of not doing an invltlb_1pg() when changing
pte's from zero.  The TLB is supposed to be invalidated when pte's are
changed _to_ zero, but this doesn't occur in all cases for global pages
(PG_G stops invltlb() from working, and invltlb_1pg() is not used
enough).

PR:		14141, 16568
Submitted by:	dillon
2000-03-13 14:47:46 +00:00
Poul-Henning Kamp
d8b47cbb70 Stop isadma from abusing the B_READ, B_RAW and B_WRITE flags.
Define ISADMA_{READ,WRITE,RAW} macros with the same numeric
values as the B_{READ,WRITE,RAW} and use them instead throughout.
2000-03-13 10:19:32 +00:00
Martin Cracauer
0c14a6606b Change the default FPU control word so that exceptions for new
processes are now masked until set by fpsetmask(3).

Submitted by:	bde
Approved by:	jkh, bde
2000-03-10 17:56:33 +00:00
Jonathan Lemon
5e3488e373 Add Compaq `ida' driver to GENERIC, update it's LINT entry.
Approved by:	jordan
2000-03-09 16:32:56 +00:00
Peter Dufault
6d9a8d3e8f I applied the wrong patch set. Back out anything associated
with the known bogus currtpriority.  This undoes the previous changes to
sys/i386/i386/trap.c, sys/alpha/alpha/trap.c, sys/sys/systm.h

Now we have the patch set approved by bde.

Approved by:	bde
2000-03-02 22:03:49 +00:00
Peter Dufault
383774c417 Patches that eliminate extra context switches in FIFO case.
Fixes p1003_1b regression test in the simple case of no RR and
FIFO processes competing.

Reviewed by:	jkh, bde
2000-03-02 16:20:07 +00:00
Brian S. Dean
2265d5e30d Reset the hardware debug registers when exec'ing a new image.
Reviewed by:	bde,jlemon
Approved by:	jkh
2000-02-28 19:48:51 +00:00
Brian Feldman
60bfc3b09b Do some cleanups of the IPv6 stuff. This is a non-functional change.
Approved by:	jkh
2000-02-27 07:35:42 +00:00
Jordan K. Hubbard
0dab491675 Enable IPv6 support by default. 2000-02-26 22:09:31 +00:00
Doug Rabson
ac19291f35 Add a workaround to allow us to detect the second pci bus on an HP
Netserver LS/2.

Approved by: jkh
2000-02-23 20:25:06 +00:00
Brian S. Dean
80275388cb Fix an __asm operand constraint which broke the -O3 and -O0 builds.
Submitted by:	Seigo Tanimura <tanimura@freebsd.org>
Approved by:	jkh
2000-02-21 13:06:50 +00:00
Brian S. Dean
de8050f9b8 Don't forget to reset the hardware debug registers when a process that
was using them exits.

Don't allow a user process to cause the kernel to take a TRCTRAP on a
user space address.

Reviewed by:	jlemon, sef
Approved by:	jkh
2000-02-20 20:51:23 +00:00
Nick Hibma
418a4537cf Update the documentation to reflect Bill Paul's latest changes. 2000-02-20 14:41:54 +00:00
Kazutaka YOKOTA
528b8853bb Make it clear that 'options XSERVER' is for pcvt and not for syscons.
Submitted by: Doug Barton <Doug@gorean.org>
Approved by: jkh
2000-02-16 04:27:04 +00:00
Doug Rabson
9a1498a435 Fix an uninitialised variable which affected probing on some machines.
Approved by: jkh
Reviewed by: gallatin
2000-02-13 09:49:05 +00:00
Peter Wemm
242c5536ea Clean up some loose ends in the network code, including the X.25 and ISO
#ifdefs.  Clean out unused netisr's and leftover netisr linker set gunk.
Tested on x86 and alpha, including world.

Approved by:	jkh
2000-02-13 03:32:07 +00:00
David E. O'Brien
ed0010ed09 Document the support in the kernel for hardware debug registers on the
ix86 platform which allows for hardware watchpoints, etc...

Submitted by:	Brian Dean <brdean@unx.sas.com>
2000-02-12 18:33:54 +00:00
Andrew Gallatin
da4009202a Allow allows peer pci buses which are directly connected to the RCC host pci
chipset to be probed & attached on newer Dell PowerEdge servers, such as
the 2400 and 4400.

Reviewed by: 	dfr, msmith, jlemon
Tested by:	hnokubi@yyy.or.jp (in a previous incantation)
Approved by:	jkh
2000-02-09 20:05:30 +00:00
Nick Hibma
4f2e8d6383 Add PCI Id's for i810 chipsets.
PR:		16517
Submitted by:	SAKIYAMA Nobuo <sakichan@lares.dti.ne.jp>
Approved by:	jhk
2000-02-07 12:50:33 +00:00
Jordan K. Hubbard
4a04162824 Clean up POSIX options, syncronize generics. 2000-02-04 07:02:53 +00:00
Nick Hibma
764d1fc491 da0 -> da 2000-02-01 09:32:04 +00:00
Peter Wemm
68b538c712 Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
Peter Wemm
690f85de65 Remove a bunch of unused (NO-OP) #if NFOO > 0 type includes and some
#include "foo.h" headers.
2000-01-29 16:17:36 +00:00
Peter Wemm
7b387768d7 Remove a workaround for a gas bug. It couldn't assemble a certain
lgdt instruction, but the binutils based one is fine and has been
for ages.
2000-01-29 13:51:17 +00:00
KATO Takenori
10d6e4904e Simplify messages of Pentium II, Pentium II Xeon, Celeron, Pentium III
and Pentium III Xeon CPUs.  If a CPU is one of Pentium II, Pentium II
Xeon and Celeron, the message is always "Pentium II/Pentium II
Xeon/Celeron".   If a CPU is one of Pentium III and Pentium III Xeon,
the message is always "Pentium III/Pentium III Xeon".
2000-01-29 07:49:02 +00:00