Any of readfds, writefds, and exceptfds may be given as nil
pointers if no descriptors are of interest.
neither wfds nor efds were of interest so now they are nil.
also, do a little better then making an educated guess for nfds.
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
camcontrol.
This enables rescanning all busses or resetting all busses in a system.
The current implementation is not the ideal way to do it -- the ideal way
to do it would be for the transport layer to handle wildcarded busses on
bus rescan and reset operations. The current implementation enumerates all
the busses and sends a rescan or reset CCB individually. Handling this
behavior in the transport layer will happen later.
Reviewed by: imp
Tested by: joerg
MFC after: 1 week
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
variable RELEASE_BUILD_FIXIT is defined, a camcontrol binary will be
built that only knows the "rescan" and "reset" subcommands. The
resulting code is small enough to still fit onto the boot floppy.
Reviewed by: ken
MFC after: 1 week
not return ENOBUFS for unreliable protocols like divert.
This should fix an issue when natd(8) keeps spamming already
full dummynet(4) queues with the same packet forever.
Spotted by: chkno@dork.com
Explained by: luigi
Reviewed by: Ari Suutari <ari.suutari@syncrontech.com>
MFC after: 2 weeks
The first "synopsis" example has a "[/prefixlength]" which shouldn't
be there, since that stuff is part of the preceeding "address" as is
explained in the description of "address".
(The way it is now, 192.168.0.1/16/prefixlength would be a proper
operand. Note that "prefixlength" is not mentioned by name anywhere.)
PR: 32462
Submitted by: Gary W. Swearingen <swear@blarg.net>
disklabel(8)'s "Reading the disk label" section starts out "To examine
or save the label on a disk drive,...". This is confusing. The given
command (disklabel [-r] disk) doesn't save anything (except to standard
out, but that should go without saying). It reads as if the command
might save something on the disk drive.
PR: 32452
Submitted by: Gary W. Swearingen <swear@blarg.net>
reinserted by a userland process, will lose a number of packet
attributes, including their source interface. This may affect
the behavior of later rules, and while not strictly a BUG, may
cause unexpected behavior if not clearly documented. A similar
note for natd(8) might be desirable.
ipfirewall(4) to the IMPLEMENTATION NOTES section because it
considers kernel internals and may confuse newbies if placed
at the very beginning of the manpage (where it used to be previously.)
Not objected by: luigi
a packed array so sizeof work. This broke RFMON mode and passing
up 802.11 packets.
The Linux emulation code was derived from the open source Linux driver to
maintain compatibility.
LEAP support is added, hints from Richard Johnson. I've verified this
locally with PC350v42510.img firmware. More bug fixing from Marco to
fix long passwords.
Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep
so it doesn't look like your system died during a flash update.
Install header files in /usr/include/dev/an
Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol.
This way you can manage 2 keys a little easier. Map the home mode into
key 5. Enhance ifconfig to dump the various configured SSIDs. I use
a bunch of different ones and roam between them. Use the syntax similar
to the WEP keys to deal with setting difference SSIDs.
Bump up up the Card capabilities RID since they added 2 bytes to it
in the latest firmware. Thankfully we changed it from a terminal
failure so the card still worked but the driver whined.
Some cleanup patches from Marco Molteni.
Submitted by: Richard Johnson <raj@cisco.com>
Marco Molteni <molter@tin.it>
and myself
Various checks: David Wolfskill <david@catwhisker.org>
Reviewed by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Approved by: Brooks Davis <brooks@freebsd.org>
Warner Losh <imp@freebsd.org>
Obtained from: Linux emulation API's from Aironet driver.
of unused partition entries and later detection of unused entries.
Use memcpy to be consistent with the rest of the code, and fix a
minor style nit.
Submitted by: bde
a special file on the command line, eg:
sysctl kern.dumpdev=/dev/ad1s1b
In parse(), when a value is given for a CTLTYPE_QUAD variable,
newval and newsize erroneously fail to be set because of an early
"break".
show_var() contains code that duplicates the functionality of the
oidfmt() function.
PR: 33151, 33150
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
variables. Use the -d flag in sysctl(8) to see this information.
Possible extensions to sysctl:
+ report variables that do not have a description
+ given a name, report the oid it maps to.
Note to developers: have a look at your code, there are a number of
variables which do not have a description.
Note to developers: do we want this in 4.5 ? It is a very small change
and very useful for documentation purposes.
Suggested by: Orion Hodson
Fair Queueing) and RED (Random Early Detection) to both give the reader
a hint what they are and to make it easier to find out more information
about them.
16384/2048.
Following recent discussions on the -arch mailing list, involving dillon
and mckusick, this change parallels the one made over a decade ago when
the default was bumped up from 4096/512.
This should provide significant performance improvements for most
folks, less significant performance losses for a few folks and
wasted space lost to large fragments for many folks.
For discussion, please see the following thread in the -arch archive:
Subject: Using a larger block size on large filesystems
The discussion ceases to be relevant when the issue of partitioning
schemes is raised.
This flag adds a pausing utility. When ran with -p, during the kernel
probing phase, the kernel will pause after each line of output.
This pausing can be ended with the '.' key, and is automatically
suspended when entering ddb.
This flag comes in handy at systems without a serial port that either hang
during booting or reser.
Reviewed by: (partly by jlemon)
MFC after: 1 week
are sometimes incorrectly being dumped.
The problem arises because the subdirectory only gets its entry
cleared from usedinomap if it is also present in dumpinomap, and it is
the absence of a directory in usedinomap that internally indicates
that the directory is under the effects of UF_NODUMP (either directly
or inherited).
PR: 32414
Submitted by: David C Lawrence <tale@dd.org>
recovery code) back in March, 2001.
In effect, this brain-o would cause 'camcontrol defects' to always return
an error.
Pointed out by: joerg
Tested by: mdodd
were only of benefit to large filesystems, which recent research
suggests is not the case, and which the original author of the text
no longer endorses.
size ratio other than 8:1. Currently, we only recommend an 8:1
ratio, because the impact of others ratios has not been adequately
investigated.
Also, do not recommend the use of the -c option in the example, since
newfs now automatically calculates the best cyl:cylgrp ratio.
This change was discussed with the author of rev 1.29.
These were mainly missing casts or wrong format strings in printf
statements, but there were also missing includes, unused variables,
functions and arguments.
The choice of `long' vs `int' still seems almost random in a lot
of places though.
directory is encountered. This includes the full path of the
directory that will be removed if the user answers "y" to the
"REMOVE?" question.
PR: bin/226851
Submitted by: KOIE Hide <hide@koie.org>
MFC after: 1 week
not listed in /etc/fstab. Previously, the user would be greeted
with "DUMP: bad sblock magic number" when dump tried to parse
the directory contents as an FFS filesystem.
PR: bin/12789
Submitted by: Bob Willcox <bob@pmr.com>
This works for wi(4), but apparantly other wireless drivers seem to do
the right thing.
Submitter and yours truly both got Mislead(tm).
Submitted by: udp <udp@sneakerz.org>
to avoid the need for rpc.lockd to perform client locks. Using
this option a user can revert back to using local locks for NFS mounts
like we did before we had rpc.lockd.
inode type bits set. Previously it would let you set IFMT bits (but
not clear them). The `chtype' command should be be used instead
for changing the inode type; having chmod half-work only causes
confusion.
MAKEDEV and sys/conf/majors, not sys/conf/device.<arch>, which has
never existed in the history of FreeBSD (well, at least it isn't in
the repository).
PR: 31558
Set 'log_ipfw_denied' option if you want the old behaviour.
PR: 30255
Submitted by: Flemming "F3" Jacobsen <fj@batmule.dk>
Reviewed by: phk
MFC after: 4 weeks
such a way that the name and the value of the variable(s) are separated
with `=' instead of the usual `: '. This is useful for producing output
that can be fed back to the sysctl utility (pasted to sysctl.conf, for
example).
Reviewed by: rwatson
Approved by: markm
MFC after: 2 weeks
header for the case where sizeof(time_t) != sizeof(int). dumprestore.h
was embedding time_t when it should have been embedding int32_t.
Use time_to_time32() and time32_to_time() to convert between the
protocoll/file-format time and time_t.
