(due to an early reset or the like), remember to unlock the socket lock.
This will not occur in 7-CURRENT, but could in theory occur in 6-STABLE.
MFC after: 1 week
do not call markvoldirty() until the mount has been flagged as read-write.
Due to the nature of the msdosfs code, this bug only seemed to appear for
FAT-16 and FAT-32.
This fixes the testcase:
#!/bin/sh
dd if=/dev/zero bs=1m count=1 oseek=119 of=image.msdos
mdconfig -a -t vnode -f image.msdos
newfs_msdos -F 16 /dev/md0 fd120m
mount_msdosfs -o ro /dev/md0 /mnt
mount | grep md0
mount -u -o rw /dev/md0; echo $?
mount | grep md0
umount /mnt
mdconfig -d -u 0
PR: 105412
Tested by: Eugene Grosbein <eugen grosbein pp ru>
revision 1.98 is NOT merged, because FreeBSD does not support this
syntax.
revision 1.99 is NOT merged, "const poisoning" part is not applicable
to FreeBSD. There is no variable shadowing, GCC can't find
this one (but there are others)
revision 1.100 is NOT merged, because it was null patch (no changes)
revision 1.101 is NOT merged, there is no BIT() macro in FreeBSD
revision 1.102 is merged
revision 1.103 is partially merged. There is no ai.ifaceh in FreeBSD
revision 1.104 is NOT merged
revision 1.105 is merged
revision 1.106 is not merged, because of rev. 1.107
revision 1.107 is a backuout of 1.106
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
---snip---
New features:
1. Optional multichannel recording (32 channels on Live!, 64 channels
on Audigy).
All channels are 16bit/48000Hz/mono, format is fixed.
Half of them are copied from sound output, another half can be
used to record any data from DSP. What should be recorded is
hardcoded in DSP code. In this version it records dummy data, but
can be used to record all DSP inputs, for example..
Because there are no support of more-than-stereo sound streams
multichannell stream is presented as one 32(64)*48000 Hz 16bit mono
stream.
Channel map:
SB Live! (4.0/5.1)
offset (words) substream
0x00 Front L
0x01 Front R
0x02 Digital Front L
0x03 Digital Front R
0x04 Digital Center
0x05 Digital Sub
0x06 Headphones L
0x07 Headphones R
0x08 Rear L
0x09 Rear R
0x0A ADC (multi-rate recording) L
0x0B ADC (multi-rate recording) R
0x0C unused
0x0D unused
0x0E unused
0x0F unused
0x10 Analog Center (Live! 5.1) / dummy (Live! 4.0)
0x11 Analog Sub (Live! 5.1) / dummy (Live! 4.0)
0x12..-0x1F dummy
Audigy / Audigy 2 / Audigy 2 Value / Audigy 4
offset (words) substream
0x00 Digital Front L
0x01 Digital Front R
0x02 Digital Center
0x03 Digital Sub
0x04 Digital Side L (7.1 cards) / Headphones L (5.1 cards)
0x05 Digital Side R (7.1 cards) / Headphones R (5.1 cards)
0x06 Digital Rear L
0x07 Digital Rear R
0x08 Front L
0x09 Front R
0x0A Center
0x0B Sub
0x0C Side L
0x0D Side R
0x0E Rear L
0x0F Rear R
0x10 output to AC97 input L (muted)
0x11 output to AC97 input R (muted)
0x12 unused
0x13 unused
0x14 unused
0x15 unused
0x16 ADC (multi-rate recording) L
0x17 ADC (multi-rate recording) R
0x18 unused
0x19 unused
0x1A unused
0x1B unused
0x1C unused
0x1D unused
0x1E unused
0x1F unused
0x20..0x3F dummy
Fixes:
1. Do not assign negative values to variables used to index emu_cards
array. This array was never accessed when index is negative, but
Alexander (netchild@) told me that Coverity does not like it.
After this change emu_cards[0] should never be used to identify
valid sound card.
2. Fix off-by-one errors in interrupt manager. Add more checks there.
3. Fixes to sound buffering code now allows driver to use large playback
buffers.
4. Fix memory allocation bug when multichannel recording is not
enabled.
5. Fix interrupt timeout when recording with low bitrate (8kHz).
Hardware:
1. Add one more known Audigy ZS card to list. Add two cards with
PCI IDs betwen old known cards and new one.
Other changes:
1. Do not use ALL CAPS in messages.
Incomplete code:
1. Automute S/PDIF when S/PDIF signal is lost.
Tested on i386 only, gcc 3.4.6 & gcc41/gcc42 (syntax only).
---snip---
This commits enables a little bit of debugging output when the driver is
loaded as a module. I did a cross-build test for amd64.
The code has some style issues, this will be addressed later.
The multichannel recording part is some work in progress to allow playing
around with it until the generic sound code is better able to handle
multichannel streams.
This is supposed to fix
CID: 171187
Found by: Coverity Prevent
Submitted by: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru>
Bring the linux mmap code more into line with how linux (2.4.x) behaves.
Tested by: Scot Hetzel <swhetzel@gmail.com> on amd64 without PROT_EXEC
Additionally to the i386 version always use PROT_EXEC in the mapping like the
previous version of the amd64 code did. We need to examinate this further to
decide what the right thing to do is. For now this fixes several problems in
the LTP test runs and should behave regarding PROT_EXEC like before.
of max() when computing the divisor in SCHED_TICK_PRI(). This prevents
cases where rounding down would allow the quotient to exceed
SCHED_PRI_RANGE.
- Garbage collect some unused flags and fields.
- Replace TDF_HOLD with sched_pin_td()/sched_unpin_td() since it simply
duplicated this functionality.
- Re-enable the rebalancer by default and fix the sysctl so it can be
modified.
marked idle, thus breaking cpu load balancing.
- Change sched_interact_update() to fix cases where the stored history
has expanded significantly rather than handling them in the callers. This
fixes a case where sched_priority() could compute a bad value.
- Add a sysctl to disable the global load balancer for experimentation.
server.
Don't complain about a hard loop id of 0xffff- we get this in
point-to-point topologies with the 2300 and 2K Login firmware.
Up the timeout on register FC4 types commands.
- Rename confusing AGP_INTEL_I845_MCHCFG to AGP_INTEL_I845_AGPM.
- Move E7205 and E7505 from i8x5 to i8x0 family. It probably worked
because the actual offset is the same.
In fact, all three families have the bit at the exact same place. Only
differences are name and width of the registers, i.e., NBXCFG (0x50, dword),
RDCR (0x51, byte), AGPM (0x51, byte), MCHCFG (0x50, word) depending on
the family of the chipsets.
sysctl and socket teardown by adding a reference count to the UNIX domain
pcb object and fixing the sysctl that enumerates unpcbs to grab a
reference on each unpcb while it builds the list to copy out to userland.
- Close a race between UNIX domain pcb garbage collection (unp_gc()) and
file descriptor teardown (fdrop()) by adding a new garbage collection
flag FWAIT. unp_gc() sets FWAIT while it walks the message buffers
in a UNIX domain socket looking for nested file descriptor references
and clears the flag when it is finished. fdrop() checks to see if the
flag is set on a file descriptor whose refcount just dropped to 0 and
waits for unp_gc() to clear the flag before completely destroying the
file descriptor.
MFC after: 1 week
Reviewed by: rwatson
Submitted by: ups
Hopefully makes the panics go away: mx1
- Add a printf in swp_pager_meta_build() to warn if the swapzone becomes
exhausted so that there's at least a warning before a box that runs out
of swapzone space before running out of swap space deadlocks.
MFC after: 1 week
Reviwed by: alc
functions now more closely resemble similar functions in nullfs.
This also eliminates some errors.
Submitted by: daichi, Masanori OZAWA <ozawa ongs co jp>
setting ftick = ltick = ticks in schedinit().
- Update the priority when we are pulled off of the run queue and when we
are inserted onto the run queue so that it more accurately reflects our
present status. This is important for efficient priority propagation
functioning.
- Move the frequency test into sched_pctcpu_update() so we don't repeat it
each time we'd like to call it.
- Put some temporary work-around code in sched_priority() in case the tick
mechanism produces a bad priority. Eventually this should revert to an
assert again.
a spin mutex since it doesn't have an INTR_FAST interrupt handler.
Beyond that the driver is still under Giant anyway.
- Remove unneeded locking during attach across operations that can't be
called with locks held (such as bus_dma_tag_create()).
MFC after: 1 week
Not objected to by: scottl
the most recently chosen index. This significantly improves nice
behavior. This allows a lower priority thread to run some multiple of
times before the higher priority thread makes it to the front of
the queue. A nice +20 cpu hog now only gets ~5% of the cpu when running
with a nice 0 cpu hog and about 1.5% with a nice -20 hog. A nice
difference of 1 makes a 4% difference in cpu usage between two hogs.
- Track a seperate insert and removal index. When the removal index is
empty it is updated to point at the current insert index.
- Don't remove and re-add a thread to the runq when it is being adjusted
down in priority.
- Pull some conditional code out of sched_tick(). It's looking a bit
large now.
- Remove the double queue mechanism for timeshare threads. It was slow
due to excess cache lines in play, caused suboptimal scheduling behavior
with niced and other non-interactive processes, complicated priority
lending, etc.
- Use a circular queue with a floating starting index for timeshare threads.
Enforces fairness by moving the insertion point closer to threads with
worse priorities over time.
- Give interactive timeshare threads real-time user-space priorities and
place them on the realtime/ithd queue.
- Select non-interactive timeshare thread priorities based on their cpu
utilization over the last 10 seconds combined with the nice value. This
gives us more sane priorities and behavior in a loaded system as
compared to the old method of using the interactivity score. The
interactive score quickly hit a ceiling if threads were non-interactive
and penalized new hog threads.
- Use one slice size for all threads. The slice is not currently
dynamically set to adjust scheduling behavior of different threads.
- Add some new sysctls for scheduling parameters.
Bug fixes/Clean up:
- Fix zeroing of td_sched after initialization in sched_fork_thread() caused
by recent ksegrp removal.
- Fix KSE interactivity issues related to frequent forking and exiting of
kse threads. We simply disable the penalty for thread creation and exit
for kse threads.
- Cleanup the cpu estimator by using tickincr here as well. Keep ticks and
ltick/ftick in the same frequency. Previously ticks were stathz and
others were hz.
- Lots of new and updated comments.
- Many many others.
Tested on: up x86/amd64, 8way amd64.
- runq_add_pri allows the caller to position the thread at any rqindex
regardless of priority.
- runq_choose_from() chooses the lowest priority thread starting from a given
index. The index is updated with the rqindex of the chosen thread. This
routine is used to pick the lowest priority relative to a given index.
- runq_remove_idx() updates the index if the run queue that held the removed
thread is now empty.
