Commit Graph

5473 Commits

Author SHA1 Message Date
Peter Wemm
c9da1b81d5 Oops, I missed these when I imported the Stallion drivers.
Add samples and some info to LINT (and a pointer to the real docs)
1996-05-10 13:26:03 +00:00
Garrett Wollman
82dab6ce62 Make it possible to return more than one piece of control information
(PR #1178).
Define a new SO_TIMESTAMP socket option for datagram sockets to return
packet-arrival timestamps  as control information (PR #1179).

Submitted by:	Louis Mamakos <loiue@TransSys.com>
1996-05-09 20:15:26 +00:00
Gary Palmer
4e31a37b94 Correct a comment. There is no fn `kprintf' 1996-05-09 18:58:06 +00:00
Poul-Henning Kamp
9f6eb8da71 Fix brino on my part. _etext doesn't include the padding to a page
boundary, which means that it doesn't mark the start of the data
section (which is then inaccessible to the programmer ??).
Hopefully fixes recent locore reboot problems.
1996-05-09 07:16:00 +00:00
Garrett Wollman
6a06dea05f Our new-old mbugf allocator. This is actually something of a blast from
the past, since it returns to the old system of allocating mbufs out of
a private area rather than using the kernel malloc().  While this may seem
like a backwards step to some, the new allocator is some 20% faster than
the old one and has much better caching properties.

Written by: John Wroclawski <jtw@lcs.mit.edu>
1996-05-08 19:38:27 +00:00
John Hay
3813de3280 Make IPXIP work.
Reviewed by:	Gary Palmer gpalmer@FreeBSD.ORG
1996-05-08 19:31:48 +00:00
Peter Wemm
809959779f *blush* How did this slip through?
Fix a dynamic initialiser in a static variable, and make sure sysctl.h
is #included.
1996-05-08 04:48:25 +00:00
Gary Palmer
4c06e9ee35 Zero out some (unused) entries in the ipxsw initiliser which only lead to
compile-tiome warnings.

Tested by:	John Hay <jhay@mikom.csir.co.za>
1996-05-08 04:38:22 +00:00
Gary Palmer
b1e8a2c542 Remove useless entries from the inetsw structure initiliser which
only produced compile-time warnings.

Reviewed/Tested by: Bill Fenner <fenner@parc.xerox.com>
1996-05-08 04:34:03 +00:00
Gary Palmer
6ddbf1e299 Clean up various compiler warnings. Most (if not all) were benign
Reviewed by:	bde
1996-05-08 04:29:08 +00:00
Wolfram Schneider
9fb933075e `mv'' -> `mv -f''
``rm'' -> ``rm -f''
so mv/rm may not ask for confirmation if you are not root
1996-05-07 23:19:49 +00:00
Nate Williams
757dab8dcb Simplify probe. Removed the DELAY() as it's not needed. 1996-05-07 22:33:19 +00:00
Nate Williams
0e76201114 Removed one of the un-documented CTRL pokes, and replace it with a one
second delay.  My ps/2 mouse is now found reliably on my ThinkPad (it
didn't before) and still works on my NEC Versa.

Submitted by:	Richard Wiwatowski <rjwiwat@adelaide.on.net>
1996-05-07 21:59:44 +00:00
Nate Williams
f73355c18f Make sure you include <sys/devconf.h> if you have devconf code. :( 1996-05-07 21:56:46 +00:00
Nate Williams
a0245aeb1a Added code to avoid keyboard 'hangs' during the probe.
Submitted by:	Richard Wiwatowski <rjwiwat@adelaide.on.net>
1996-05-07 21:48:55 +00:00
Nate Williams
0c7b035e39 Added devconf() support.
Obtained from: Richard Wiwatowski <rjwiwat@adelaide.on.net>
1996-05-07 21:32:29 +00:00
Nate Williams
077e6558ec Re-wrote psm_poll_status() to use the ioport supplied in the kernel
config file instead of hard-coding it in the driver.  No functional
differences.

This is based on the code Richard Wiwatowski <rjwiwat@adelaide.on.net>
sent to the mailing list.
1996-05-07 21:11:13 +00:00
Nate Williams
110f70b852 Last typo fixed (network came up for a few minutes). 1996-05-07 20:39:34 +00:00
Nate Williams
ff473041c5 Augh, more typos.
(I hate *Sprint*, since the network is down it's hard to test things well.)
1996-05-07 20:08:21 +00:00
Nate Williams
83cc6d6bdd Whoops, brain-o's with the previous commit. Fix up quite a few typos. 1996-05-07 19:40:47 +00:00
Nate Williams
aaf73493e8 - KNF'ify
- Prepend PSM_ to some defines to avoid any possible name-space problems
- Use some already defined constants instead of magic #'s where appropriate.

[ No functional changes (yet) ]
1996-05-07 19:01:31 +00:00
Poul-Henning Kamp
83606d2247 Several locations in sys/netinet/ip_fw.c are lacking or incorrectly
use spl() functions.

Reviewed by:	phk
Submitted by:	Alex Nash <alex@zen.nash.org>
1996-05-06 20:31:04 +00:00
Garrett Wollman
9f9b3dc4ae Add three new route flags to help determine what sort of address
the destination represents.  For IP:

- Iff it is a host route, RTF_LOCAL and RTF_BROADCAST indicate local
  (belongs to this host) and broadcast addresses, respectively.

- For all routes, RTF_MULTICAST is set if the destination is multicast.

The RTF_BROADCAST flag is used by ip_output() to eliminate a call to
in_broadcast() in a common case; this gives about 1% in our packet-generation
experiments.  All three flags might be used (although they aren't now)
to determine whether a packet can be forwarded; a given host route can
represent a forwardable address if:

	(rt->rt_flags & (RTF_HOST | RTF_LOCAL | RTF_BROADCAST | RTF_MULTICAST))
	== RTF_HOST

Obviously, one still has to do all the work if a host route is not present,
but this code allows one to cache the results of such a lookup if rtalloc1()
is called without masking RTF_PRCLONING.
1996-05-06 17:42:13 +00:00
Poul-Henning Kamp
b74a76ee15 An old typo MCLBYTES/CLBYTES became more obvious bogus now.
Submitted by:		wollman
1996-05-06 17:18:12 +00:00
Paul Traina
07167e6200 Update qcamdriver to 1.1-release distribution.
- move the cdevsw structure back up front (sigh)
- use __linux__ instead of LINUX
1996-05-06 16:47:28 +00:00
Peter Wemm
3af9eab18e Avoid potential trademark conflict 1996-05-05 17:55:54 +00:00
Peter Wemm
3461d589f2 Change the logic of the interrupt/poll loop. It no longer loops until
it empties all of the 256 byte incoming fifo, as it can spend more time
processing one port than intended, especially if data is streaming in
at 115.2K.  The port fifo will be emptied and dumped into the tty system
and left until next time.  I've been running this for quite some time on
one of my systems here.
Also, if the tty layer is blocked or full it lets the hardware assert the
flow control rather than loosing the data.
1996-05-05 17:35:19 +00:00
Peter Wemm
34914e50d4 Change the compiled-in polling parameters to a sysctl setting. 1996-05-05 17:09:04 +00:00
Joerg Wunsch
9e609dde83 uninitialized auto variable shmseg is used in ...
Closes PR #kern/1174

Submitted by:	enami@ba2.so-net.or.jp
1996-05-05 13:53:48 +00:00
Paul Traina
1664f6f59b Add DDB_UNATTENDED to opt_ddb.h where it belongs. 1996-05-05 02:26:57 +00:00
Peter Wemm
962b3ba7ba Add $Id$ 1996-05-04 08:53:27 +00:00
Peter Wemm
1d52f67989 Some trivial updates to the information in here, A good deal of this
is out of date, as it deals with patching the driver into the kernel.
1996-05-04 08:51:42 +00:00
Peter Wemm
3fca8b1c96 Add $Id$
Compile for FreeBSD-2.2
Fix some compile warnings about function declarations
-current's VM include files have changed lately, this needed to be updated.
Use correct major number.
1996-05-04 08:49:40 +00:00
Peter Wemm
8c72709bb8 Add $Id$
Compile for FreeBSD-2.2 (it compiles for 2.0.5, 2.1 and 2.2)
Use -current include file locations
Use -current pciintr calling conventions
1996-05-04 08:44:42 +00:00
Peter Wemm
346bbdf488 Add $Id$ 1996-05-04 08:42:14 +00:00
Peter Wemm
98eba67210 Add stl and stli drivers for the Stallion cards. 1996-05-04 08:41:28 +00:00
Peter Wemm
c7893f2fbe Distinguish the classes of stallion boards (intelligent vs. "smart" cd1400)
and which driver is for which.  Major 72 was for the cd1400 based cards,
I've grabbed the next free (75) for the intelligent, high performance
boards.
1996-05-04 08:40:13 +00:00
Paul Traina
3e627c9e2a Update to 1.1beta5d 1996-05-04 07:05:55 +00:00
Paul Traina
3bac9a71b6 Update to version 1.1beta5d of the driver. This driver now runs under
FreeBSD 2.1 and 2.2, BSD/OS 2.x, Linux, Solaris, and SCO V.
1996-05-04 07:03:55 +00:00
Peter Wemm
dcde8b4904 This commit was generated by cvs2svn to compensate for changes in r15599,
which included commits to RCS files with non-trunk default branches.
1996-05-04 06:31:39 +00:00
Peter Wemm
c1e8e76993 Import kernel parts of the v0.0.5alpha Stallion driver(s).
This is now two seperate drivers that support (I think) all of Stallions's
range, including the high performance intelligent cards, and their older
cards.

Submitted by: Greg Ungerer (gerg@stallion.oz.au)

(User-mode parts and patches to follow)
1996-05-04 06:31:39 +00:00
Peter Wemm
53f25a7bd9 This commit was generated by cvs2svn to compensate for changes in r15596,
which included commits to RCS files with non-trunk default branches.
1996-05-04 06:16:23 +00:00
Peter Wemm
64b69fe2e7 Import v0.0.4alpha of the Stallion driver.
Sumbitted by: Greg Ungerer (gerg@stallion.oz.au)
1996-05-04 06:16:23 +00:00
Peter Wemm
c7b0cbac79 This commit was generated by cvs2svn to compensate for changes in r15593,
which included commits to RCS files with non-trunk default branches.
1996-05-04 06:13:22 +00:00
Peter Wemm
1d0f52d7e4 Import v0.0.3alpha of Stallion driver.
Submitted by: Greg Ungerer (gerg@stallion.oz.au)
1996-05-04 06:13:22 +00:00
Peter Wemm
b17b915ed3 This commit was generated by cvs2svn to compensate for changes in r15590,
which included commits to RCS files with non-trunk default branches.
1996-05-04 06:09:47 +00:00
Peter Wemm
7450fe9fc2 Import v0.0.2 alpha of the Stallion driver
Submitted by: Greg Ungerer (gerg@stallion.oz.au)
1996-05-04 06:09:47 +00:00
Peter Wemm
019ab50b3d This commit was generated by cvs2svn to compensate for changes in r15587,
which included commits to RCS files with non-trunk default branches.
1996-05-04 06:03:59 +00:00
Peter Wemm
0a9462e353 Initial import of driver for the Stallion EasyIO and EasyConnection 8/32
boards by Greg Ungerer (gerg@stallion.oz.au).  (v0.0.1 alpha)

This is a multiple import of all revisions available to build up
a history.

This driver supports only some of the Stallion range, in particular, not
the highly intelligent cards.  That comes in shortly.

Submitted by: Greg Ungerer (gerg@stallion.oz.au)
1996-05-04 06:03:59 +00:00
Poul-Henning Kamp
aa8de40ae5 Another sweep over the pmap/vm macros, this time with more focus on
the usage.  I'm not satisfied with the naming, but now at least there is
less bogus stuff around.
1996-05-03 21:01:54 +00:00