- Remove all:. It's redundant, and ${LIB} in it is just a bug.
- Remove .ORDER:. *.mgc files can safely be built in parallel.
- Remove PITA. The mkmagic tool is smart to put the binary file
into the current directory (${.OBJDIR}) even if the source file
lives somewhere else, which is just what we need.
EtherJet, the interrupt is selected in the eeprom based on the layout
of the PC Card board. Since this is encoded into the EEPROM, and has
no relationship to the IRQ that the pccard bridge routes the PC Card's
interrupt pin to.
As such, stop writing to that register. This gets my EtherJet working.
# The eeprom reading code appears to be totally wrong for my EtherJet
# card. This causes the card to bogusly detect the media options
# available.
significant clean up and optimizations:
- don't call bioq_disksort() on every command, the hardware will do that for
us.
- remove all of the complicated bio deferral code. bio's that can't be
serviced immediately can just wait on the bioq.
- Only reserve one command object for doing control commands to the card.
This simplifies a lot of code and significantly reduces the size of the
command struct.
- Allocate commands out of a slab instead of embedding them into the softc.
- Call the command action method directly instead of having ips_get_free_cmd()
call it indirectly.
MFC After: 1 week
and as long as we're not compiling with IPA, gcc(1) won't optimize
the call away. The whole purpose of using memcpy(3) is to avoid
misaligned loads and stores when we need to read or write the value
in the unaligned memory location. But if gcc(1) optimizes the call
to memcpy(3) away, it will typically introduce misaligned loads and
stores. In this context that's not a good idea.
its value once per ifconfig run. Use Sam's new callback
operation to set it when everything is done.
The purpose for this is that if you did something like
ifconfig bge0 media 100baseTX mediaopt full-duplex
multiple times it would end up causing the PHY to re-sync
since it would send the IOCTLs:
ifconfig bge0 media 100baseTX -mediaopt full-duplex
ifconfig bge0 media 100baseTX mediaopt full-duplex
This would cause the PHY to be updated twice even though
there really wasn't any change since the check in
sys/net/if_media.c would always fail.
Caveat is that this doesn't fix the case of:
ifconfig bge0 media autoselect
etc. since in sys/net/if_media.c it forces an autoselect to go through
the entire process in ifmedia_ioctl :-( :
/*
* If no change, we're done.
* XXX Automedia may invole software intervention.
* Keep going in case the the connected media changed.
* Similarly, if best match changed (kernel debugger?).
*/
if ((IFM_SUBTYPE(newmedia) != IFM_AUTO) &&
(newmedia == ifm->ifm_media) &&
(match == ifm->ifm_cur))
return 0;
Briefly looked at by: sam
- Constify structure members that should not be changed
during process.
- Apply static where needed
- signed/unsigned madness
- Bump WARNS?= levels from 2 to 6
(this is a diff reduction for a subsequent commit against these
Makefile's)
any pending RADIUS transaction. Use this before sending RAD_STOP RADIUS
messages so that we definitely ``stop'' the session.
It was discovered that sometimes when the link timed out, we got lucky
enough to have an un-ACK'd RADIUS accounting transaction in progress,
resulting in the RAD_STOP message failing to send.
Original report found on: A russion news group
Text translated by: glebius
Tested by: Alexey Popov llp at iteranet dot com
MFC after: 7 days
mmap() on NTFS files was hosed, returning pages offset from the
start of the disk rather than the start of the file. (ie, "cp" of
a 1-block file would get you a copy of the boot sector, not the
data in the file.) The solution isn't ideal, but gives a functioning
filesystem.
Cached vnode lookup was also broken, resulting in vnode haemorrhage.
A lookup on the same file twice would give you two vnodes, and the
resulting cached pages.
Just recently, mmap() was broken due to a lack of a call to
vnode_create_vobject() in ntfs_open().
Discussed with: phk@
60. The postinc store tests currently fail (value mismatch). Hence
the score as of this commit is 48 out of 60. Either the kernel or
the tests need to be fixed.
