We would unlock fvp here, only to unlock it again below,
just before "bad".
Reviewed By: kib
Tested by: pho
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27339
Investigation of iSCSI target data corruption reports brought me to
discovery that cxgb(4) expects mbufs to be physically contiguous, that
is not true after I've started using m_extaddref() in software iSCSI
for large zero-copy transmissions. In case of fragmented memory the
driver transmitted garbage from pages following the first one due to
simple use of pmap_kextract() for the first pointer instead of proper
bus_dmamap_load_mbuf_sg(). Seems like it was done as some optimization
many years ago, and at very least it is wrong in a world of IOMMUs.
This patch just removes that optimization, plus limits packet coalescing
for mbufs crossing page boundary, also depending on assumption of one
segment per packet.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Reviewed by: mmacy, np
Differential revision: https://reviews.freebsd.org/D28428
Parallel builds of stand should be assumed both possible and safe as of
7012461c9b, so let's start using some jobs to speed up lualoader test
harness builds.
This is a tradeoff which saves jumps for smaller sizes while making
the 8-16 range slower (roughly in line with the other cases).
Tested with glibc test suite.
For example size 3 (most common with vfs namecache) (ops/s):
before: 407086026
after: 461391995
The regressed range of 8-16 (with 8 as example):
before: 540850489
after: 461671032
According to the Lua 5.4 manual section 6.4.1 ("Patterns"), the interaction
between ranges and classes is not defined and hyphens must be specified at
either the beginning or the end of a set if they are not escaped.
Move all such occurrences to the beginning.
Reported-by: _parv (twitter)
MFC-after: 3 days
Currently, if the immutable algorithm like bsearch or radix_lockless
receives rtable update notification, it schedules algorithm rebuild.
This rebuild is executed by the callout after ~50 milliseconds.
It is possible that a script adding an interface address and than route
with the gateway bound to that address will fail. It can happen due
to the fact that fib is not updated by the time the route addition
request arrives.
Fix this by allowing synchronous algorithm rebuilds based on certain
conditions. By default, these conditions assume:
1) less than net.route.algo.fib_sync_limit=100 routes
2) routes without gateway.
* Move algo instance build entirely under rib WLOCK.
Rib lock is only used for control plane (except radix algo, but there
are no rebuilds).
* Add rib_walk_ext_locked() function to allow RIB iteration with
rib lock already held.
* Fix rare potential callout use-after-free for fds by binding fd
callout to the relevant rib rmlock. In that case, callout_stop()
under rib WLOCK guarantees no callout will be executed afterwards.
MFC after: 3 days
subscriptions during RIB modifications.
Add new subscriptions to the beginning of the lists instead of
the end. This fixes the situation when new subscription is created
int the callback for the existing subscription, leading to the
subscription notification handler pick it.
MFC after: 3 days
* Move per-prefix debug lines under LOG_DEBUG2
* Create fib instance counter to distingush log messages between
instances
* Add more messages on rebuild reason.
MFC after: 3 days
In a6c2507d1b support for LinuxKPI
firmware loading was added. Record the dependency on firmware(9)
as otherwise (if built as module) linuxkpi will no longer load.
Reported-by: tijl
MFC after: 1 day
X-MFC-with: a6c2507d1b
Sponsored-by: The FreeBSD Foundation
The argument passed to g_provider_by_name(9) can be a geom name or a
fullpath.
- g_provider_by_name() gained this functionality in
769afdc71e.
Reviewed by: imp, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27566
There's a third party dependency on this option; currently,
net/openldap24-{,sasl-}client. At least mention that an openldap from ports
is needed for this option.
PR: 252866
Reported-by: Build Option Survey via Michael Dexter
MFC-after: 3 days
After discussion with Chuck Silvers (chs@) we have decided that
there is a better way to resolve this lock order reversal which
will be committed separately.
Sponsored by: Netflix
This option was not tested when WARNS was globally lifted in the src tree up
to 6. Drop WARNS back down to unbreak the build; note that this is still
enabling more warnings than it had before the WARNS change, so the gcc build
may need to be independently evaluated at this level.
PR: 252865
Reported-by: Build Option Servey via Michael Dexter
MFC-after: 3 days
All page zeroing is using temporal stores with rep movs*, the routine is
unused for several years.
Should a need arise for zeroing using non-temporal stores, a more
optimized variant can be implemented with a more descriptive name.
The previous code neglected to use primitives which can find the end
of the string without having to branch on every character.
While here augment the somewhat misleading commentary -- strlen as
implemented here leaves performance on the table, especially so for
userspace. Every arch should get a dedicated variant instead.
In the meantime this commit lessens the problem.
Tested with glibc test suite.
Naive test just calling strlen in a loop on Haswell (ops/s):
$(perl -e "print 'A' x 3"):
before: 211198039
after: 338626619
$(perl -e "print 'A' x 100"):
before: 83151997
after: 98285919
The initial plan was to remove rib_lookup_info() before
FreeBSD 13. As several customers are still remaining,
fix rib_lookup_info() for the multipath use case.
D26436 introduced support for stacked vlans that changed the way vlans
are configured. In particular, this change broke setups that have
same-number vlans as subinterfaces.
Vlan support was initially created assuming "vlanX" semantics. In this paradigm,
automatic number assignment supported by cloning (ifconfig vlan create) was a
natural fit.
When "ifaceX.Y" support was added, allowing to have the same vlan number on
multiple devices, cloning code became more complex, as the is no
unified "vlan" namespace anymore. Such interfaces got the first spare
index from "vlan" cloner. This, in turn, led to the following problem:
ifconfig ix0.333 create -> index 1
ifconfig ix0.444 create -> index 2
ifconfig vlan2 create -> allocation failure
This change fixes such allocations by using cloning indexes only for
"vlanX" interfaces.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27505
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
- Use libelf to parse ELF data structures and remove code duplication
for ELF32.
- Don't require the OSABI field to be set to the FreeBSD OSABI for
shared libraries. Both AArch64 and RISC-V leave it set to "none"
and instead depend on the ABI tag note. For ldd, this means falling
back to walking the notes in PT_NOTE segments to find the ABI tag
note to determine if an ELF shared library without OSABI set in the
header file is a FreeBSD shared library.
Reviewed by: kib
MFC after: 5 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28342
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
This reverts commit fcb4797c90.
With `CIRRUS_CLONE_DEPTH` unspecified (using the default of 50) the
time to clone the repo increased from a little under 2 minutes to over
6 minutes, possibly due to additional processing required by GitHub.
We will want to watch out for occasional `Failed to force reset to
SHA: object not found!` errors.
Previously Cirrus was skipped on svn_head to avoid running CI on two
different branches with identical content. With the transition to git
this serves no purpose.
Reported by: kevans
Sponsored by: The FreeBSD Foundation
Which is `50`. I saw a few errors like
`Failed to force reset to SHA: object not found!` which seems is
happening because the SHA is not available because there were two
commits pushed almost simultaneously and the second from the top fails
with this error because the SHA is not in the history.
Pull Request: https://github.com/freebsd/freebsd-src/pull/454
There's a currently ad-hoc protocol to hand off the FreeBSD kernel
payload between the loader and the kernel itself when Xen is in the
middle of the picture. Such protocol wasn't very resilient to changes
to the loader itself, because it relied on moving metadata around to
package it using a certain layout. This has proven to be fragile, so
replace it with a more robust version.
The new protocol requires using a xen_header structure that will be
used to pass data between the FreeBSD loader and the FreeBSD kernel
when booting in dom0 mode. At the moment the only data conveyed is the
offset of the start of the module metadata relative to the start of the
module itself.
This is a slightly disruptive change since it also requires a change
to the kernel which is contained in this patch. In order to update
with this change the kernel must be updated before updating the
loader, as described in the handbook. Note this is only required when
booting a FreeBSD/Xen dom0. This change doesn't affect the normal
FreeBSD boot protocol.
This fixes booting FreeBSD/Xen in dom0 mode after
3630506b9d.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D28411
This follows select by eleminating the use of filedesc lock.
This is a win for single-threaded processes and a mixed bag for others
as at small concurrency it is faster to take the lock instead of
refing/unrefing each file descriptor.
Nonetheless, removal of shared lock usage is a step towards a
mtx-protected fd table.
Since most select users are single-threaded this avoid a lot of work
in the common case.
For example select of 16 fds (ops/s):
before: 2114536
after: 2991010
This can be used by single-threaded processes which don't share a file
descriptor table to access their file objects without having to
reference them.
For example select consumers tend to match the requirement and have
several file descriptors to inspect.
This tests fork()s, so if there is still data in the stdout buffer on fork
it will print it again in the child process. This was happening in the
CheriBSD CI and caused the test to complain about malformed TAP output.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28397
