to contrib/llvm. This is not yet connected to the build, the glue for
that will come in a follow-up commit.
PR: 236062
MFC after: 1 month
X-MFC-With: r344779
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
When the pmap with pti disabled (i.e. pm_ucr3 == PMAP_NO_CR3) is
activated, tss.rsp0 was not updated. Any interrupt that happen before
next context switch would use pti trampoline stack for hardware frame
but fault and interrupt handlers are not prepared to this. Correctly
update tss.rsp0 for both PMAP_NO_CR3 and pti pmaps.
Note that this case, pti = 1 but pmap->pm_ucr3 == PMAP_NO_CR3 is not
used at the moment.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
Previously the main pfsync lock and the bucket locks shared the same name.
This lead to spurious warnings from WITNESS like this:
acquiring duplicate lock of same type: "pfsync"
1st pfsync @ /usr/src/sys/netpfil/pf/if_pfsync.c:1402
2nd pfsync @ /usr/src/sys/netpfil/pf/if_pfsync.c:1429
It's perfectly okay to grab both the main pfsync lock and a bucket lock at the
same time.
We don't need different names for each bucket lock, because we should always
only acquire a single one of those at a time.
MFC after: 1 week
Looks like the example was broken by change of SYSCTL_STATIC_CHILDREN
definition in r267992. Fix build by switching to using SYSCTL_ADD_ROOT_NODE
PR: 236139
Submitted by: Andrew Reiter <arr@watson.org>
MFC after: 1 week
This mutes the duplicate target warning emitted via bsd.files.mk each build.
MFC after: 1 week
Reviewed by: asomers
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19603
This change integrates the unit tests for zfsd into the test suite using the
integration method described in r345203.
This change removes the `LOCALBASE` includes added for the port version of
googlemock/googletest, as well as unnecessary `LIBADD`/`DPADD` and `CXXFLAGS`
defines, which are included in the `GTEST_CXXFLAGS` variable, as part of
r345203.
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
MFC with: r345203
Differential Revision: https://reviews.freebsd.org/D19552
This initial integration takes googlemock/googletest release 1.8.1, integrates
the library, tests, and sample unit tests into the build.
googlemock/googletest's inclusion is optionally available via `MK_GOOGLETEST`.
`MK_GOOGLETEST` is dependent on `MK_TESTS` and is enabled by default when
built with a C++11 capable toolchain.
Google tests can be specified via the `GTESTS` variable, which, in comparison
with the other test drivers, is more simplified/streamlined, as Googletest only
supports C++ tests; not raw C or shell tests (C tests can be written in C++
using the standard embedding methods).
No dependent libraries are assumed for the tests. One must specify `gmock`,
`gmock_main`, `gtest`, or `gtest_main`, via `LIBADD` for the program.
More information about googlemock and googletest can be found on the
Googletest [project page](https://github.com/google/googletest), and the
[GoogleMock](https://github.com/google/googletest/blob/v1.8.x/googlemock/docs/Documentation.md)
and
[GoogleTest](https://github.com/google/googletest/tree/v1.8.x/googletest/docs)
docs.
These tests are originally integrated into the build as plain driver tests, but
will be natively integrated into Kyua in a later version.
Known issues/Errata:
* [WhenDynamicCastToTest.AmbiguousCast fails on FreeBSD](https://github.com/google/googletest/issues/2172)
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D19551
`arc_reclaim_thread()` calls `arc_adjust()` after calling
`arc_kmem_reap_now()`; `arc_adjust()` signals `arc_get_data_buf()` to
indicate that we may no longer be `arc_is_overflowing()`.
The problem is, `arc_kmem_reap_now()` can take several seconds to
complete, has no impact on `arc_is_overflowing()`, but due to how the
code is structured, can impact how long the ARC will remain in the
`arc_is_overflowing()` state.
The fix is to use seperate threads to:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
illumos/illumos-gate@de753e34f9
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Brad Lewis <brad.lewis@delphix.com>
use them without redefining the value names. New clang no longer
allows to redefine a enum value name to the same value.
Bump __FreeBSD_version, since ports depend on that.
Discussed with: jhb
At this point, all routes should've already been dropped by removing all
members from the bridge. This condition is in-fact KASSERT'd in the line
immediately above where this nop flush was added.
At this point, all routes should've already been dropped by removing all
members from the bridge. This condition is in-fact KASSERT'd in the line
immediately above where this nop flush was added.
and for %ecx after RDTSCP.
Initialize TSC_AUX MSR with CPUID. It allows for userspace to cheaply
identify CPU it was executed on some time ago, which is sometimes useful.
Note: The values returned might be changed in future.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
After r345180 we need to have the appropriate vnet context set to delete an
rtnode in bridge_rtnode_destroy().
That's usually the case, but not when it's called by the STP code (through
bstp_notify_rtage()).
We have to set the vnet context in bridge_rtable_expire() just as we do in the
other STP callback bridge_state_change().
Reviewed by: kevans
If underlying driver provides no TRIM/UNMAP support and operation fails
due to this reason, state it clearly in verbose mode (default)
instead of writing standard message that may be too cryptic for a user:
trim: ioctl(DIOCGDELETE) failed: nda0: Operation not supported
Now it would write:
trim: nda0: TRIM/UNMAP not supported by driver
But still use previous format including errno value for quiet mode.
Small candelete() function borrowed from diskinfo(8) code.
This function was committed by Alan Somers <asomers@FreeBSD.org>,
so give him some credit.
Reported by: chuck
bridge_rtnode_zone still has outstanding allocations at the time of
destruction in the current model because all of the interface teardown
happens in a VNET_SYSUNINIT, -after- the MOD_UNLOAD has already been
processed. The SYSUNINIT triggers destruction of the interfaces, which then
attempts to free the memory from the zone that's already been destroyed, and
we hit a panic.
Solve this by virtualizing the uma_zone we allocate the rtnodes from to fix
the ordering. bridge_rtable_fini should also take care to flush any
remaining routes that weren't taken care of when dynamic routes were flushed
in bridge_stop.
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D19578
The ext2_nodealloccg() function unlocks the mount point
in case of successful node allocation.
The additional unlocks are not required and should be removed.
PR: 236452
Reported by: pho
MFC after: 3 days
If the spanning tree root interface is removed from the bridge we panic
on the next 'ifconfig'.
While the STP code is notified whenever a bridge member interface is
removed from the bridge it does not clear the bs_root_port. This means
bs_root_port can still point at an bridge_iflist which has been free()d.
The next access to it will panic.
Explicitly check if the interface we're removing in bstp_destroy() is
the root, and if so re-assign the roles, which clears bs_root_port.
Reviewed by: philip
MFC after: 2 weeks
The counters of pf tables are updated outside the rule lock. That means state
updates might overwrite each other. Furthermore allocation and
freeing of counters happens outside the lock as well.
Use counter(9) for the counters, and always allocate the counter table
element, so that the race condition cannot happen any more.
PR: 230619
Submitted by: Kajetan Staszkiewicz <vegeta@tuxpowered.net>
Reviewed by: glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19558
PCIe devices starting with version 1.1 must set the Role-Based Error
Reporting bit.
And while we're in the neighborhood, generalize the code assigning the
device type.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19580
The NVMe Identify Namespace data structure's Number of LBA Formats
(NLBAF) field is a 0's based value (i.e. 0x0 means 1). Since the
emulation only supports a single format, set NLBAF to 0x0, not 1.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19579
With new pfil(9) KPI it is possible to pass a void pointer with length
instead of mbuf pointer to a packet filter. Until this commit no filters
supported that, so pfil run through a shim function pfil_fake_mbuf().
Now the ipfw(4) hook named "default-link", that is instantiated when
net.link.ether.ipfw sysctl is on, supports processing pointer/length
packets natively.
- ip_fw_args now has union for either mbuf or void *, and if flags have
non-zero length, then we use the void *.
- through ipfw_chk() we handle mem/mbuf cases differently.
- ether_header goes away from args. It is ipfw_chk() responsibility
to do parsing of Ethernet header.
- ipfw_log() now uses different bpf APIs to log packets.
Although ipfw_chk() is now capable to process pointer/length packets,
this commit adds support for the link level hook only, see
ipfw_check_frame(). Potentially the IP processing hook ipfw_check_packet()
can be improved too, but that requires more changes since the hook
supports more complex actions: NAT, divert, etc.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D19357
IPFW_ARGS_OUT are utilized. They are intented to substitute the "dir"
parameter that is often passes together with args.
- Rename ip_fw_args.oif to ifp and now it is set to either input or
output interface, depending on IPFW_ARGS_IN/OUT bit set.
uname is always rebuild on FreeBSD so use this as ABI_FILE for pkg when
building pkg for pkgbase.
pkg uses uname too as default ABI_FILE as of commit d8bbf980b7f6f424fb7cc672c23ab2dfc82b6599
d8bbf980b7
Discussed with: bapt
MFC after: 1 week
THRE is always asserted in LSR reads, so REG_IER writes that raise
IER_ETXRDY must also set thre_int_pending.
Reported by: Illumos, according to emaste@
https://twitter.com/ed_maste/status/1106195949087584258
MFC after: 2 weeks
This has the advantage of being obvious to sniff out the designated prefix
by eye and it has all the right bits set. Comment stolen from ffec.
I've removed bryanv@'s pending question of using the FreeBSD OUI range --
no one has followed up on this with a definitive action, and there's no
particular reason to shoot for it and the administrative overhead that comes
with deciding exactly how to use it.
