Add basic power control (reset, power off) and bind
ttyuX to opal console so that init will start login there.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
- Call resource_int_value() once during attach, rather than within the
pci_(read|write)_config() code path; this avoids taking a blocking mutex
to read kenv variables.
- Use a spin lock to protect non-atomic config space accesses; this matches
the behavior of Darwin's AppleMacRiscPCI driver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D13839
supported on newer POWER hardware and in graphical VMs run on the same,
which are typically XHCI-only. The 32-bit GENERIC kernel, which
does not run on hardware made in the last decade and is unlikely to
encounter XHCI devices, is left unchanged.
PR: kern/224940
Submitted by: Gustavo Romero
MFC after: 1 week
The data segement was too big.
Add a fix-up function like on ia32 for MAXDSIZ.
While here, bring also the MAXSSIZ closer to amd64 and add an equal fix-up
function for MAXSSIZ.
Reviewed by: jhibbits@
Obtained from: jhibbits@
Differential Revision: https://reviews.freebsd.org/D13753
is of limited utility outside of platform-specific code and can vary
at runtime when running as a hypervisor guest, so does not even have the
virtue of being a static identifier.
Reviewed by: jhibbits
instead of hard-coding a default. This information is passed implicitly by
the PS3 firmware and can be relied upon. Also adjust the default mode, if
somehow firmware doesn't pass one, to 1920x1080 from 720x480 since it is
2017.
MFC after: 2 weeks
- Densely number CPUs to avoid systems with CPUs with very high ID numbers
- Always have the BSP be CPU 0 to avoid remnant brokenness with non-0 BSPs
in other parts of the kernel.
- Improve parsing of the device tree CPU listings on SMT systems.
- Allow reboot via RTAS as well as OF for pSeries systems booted by FDT
without functioning Open Firmware.
Obtained from: projects/powernv
MFC after: 3 weeks
is used as the bootloader on a number of PPC64 platforms. This involves the
following pieces:
- Making the first instruction a valid kernel entry point, since kexec
ignores the ELF entry value. This requires a separate section and linker
magic to prevent the linker from filling the beginning of the section
with stubs.
- Adding an entry point at 0x60 past the first instruction for systems
lacking firmware CPU shutdown support (notably PS3).
- Linker script changes to support the above.
MFC after: 1 month
If these are not aligned, the linker has to emit a different type of
relocation that the early boot self-relocation code cannot handle, even
in principle, resulting in them being set to zero and the kernel crashing.
MFC after: 1 week
draft of a never-finalized standard (CHRP) and is irrelevant in practice
on FreeBSD since we load the kernel with loader(8) on Open Firmware
platforms anyway. Moreover, loader(8), which is directly loaded by Open
Firmware, has never had an equivalent note.
MFC after: 2 weeks
the 32-bit cookie can be sign-extended on its way out of the loader and
through Open Firmware. If sign-extended, the in-kernel check of its value
would fail on 64-bit systems, resulting in a mountroot prompt. Solve this
by telling the kernel to ignore the high-order bits.
PR: kern/224437
Submitted by: Gustavo Romero
They provide relaxed-ordered atomic access semantic. Due to the
FreeBSD memory model, the operations are syntaxical wrappers around
the volatile accesses. The volatile qualifier is used to ensure that
the access not optimized out and in turn depends on the volatile
semantic as implemented by supported compilers.
The motivation for adding the operation is to help people coming from
other systems or knowing the C11/C++ standards where atomics have
special type and require use of the special access operations. It is
still the case that FreeBSD requires plain load and stores of aligned
integer types to be atomic.
Suggested by: jhb
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13534
Currently Facility Unavailable is absent and once an application
tries to use or access a register from a feature disabled in the
CPU it causes a kernel panic.
A simple test-case is:
int main() { asm volatile ("tbegin.;"); }
which will use TM (Hardware Transactional Memory) feature which
is not supported by the kernel and so will trigger the following
kernel panic:
----
fatal user trap:
exception = 0xf60 (unknown)
srr0 = 0x10000890
srr1 = 0x800000000000f032
lr = 0x100004e4
curthread = 0x5f93000
pid = 1021, comm = htm
panic: unknown trap
cpuid = 40
KDB: stack backtrace:
Uptime: 3m18s
Dumping 10 MB (3 chunks)
chunk 0: 11MB (2648 pages) ... ok
chunk 1: 1MB (24 pages) ... ok
chunk 2: 1MB (2 pages)panic: IOMMU mapping error: -4
cpuid = 40
Uptime: 3m18s
----
Since Hardware Transactional Memory is not yet supported by FreeBSD, treat
this as an illegal instruction.
PR: 224350
Submitted by: Gustavo Romero <gromero_AT_ibm_DOT_com>
MFC after: 2 weeks
Without the identifier in the list booting FreeBSD results in printing the
following (from a PowerKVM boot):
cpu0: Unknown PowerPC CPU revision 0x1201, 2550.00 MHz
For now, add the same feature list as POWER8. As new capabilities are added to
support POWER9 specific features, they will be added to this.
PR: 224344
Submitted by: Breno Leitao <breno_DOT_leitao_AT_gmail_DOT_com>
Decode on Book-E:
* ESR (Exception Syndrome Register)
* MCSR (Machine Check Status Register)
On AIM:
* MSSSR (Memory Subsystem Status Register)
Makes it easier to tell at a glance the type of trap and machine check
conditions now.
The DTrace fasttrap entry points expect a struct reg containing the
register values of the calling thread. Perform the conversion in
fasttrap rather than in the trap handler: this reduces the number of
ifdefs and avoids wasting stack space for traps that don't involve
DTrace.
MFC after: 2 weeks
pmap_track_page() only works with physical memory pages, which have a
constant vm_page_t address. Microoptimize pmap_track_page() to perform one
less operation under the lock.
This was done in 32-bit mode, but not duplicated when 64-bit mode was
brought in. Without this, stale mappings can be left, leading to odd
crashes when the wrong VA is checked in XX_PhysToVirt() (dpaa(4)).
This variable should be pure MI except possibly for reading it in MD
dump routines. Its initialization was pure MD in 4.4BSD, but FreeBSD
changed this in r36441 in 1998. There were many imperfections in
r36441. This commit fixes only a small one, to simplify fixing the
others 1 arch at a time. (r47678 added support for
special/early/multiple message buffer initialization which I want in
a more general form, but this was too fragile to use because hacking
on the msgbufp global corrupted it, and was only used for 5 hours in
-current...)
The Display Interface Unit (DIU) uses main memory for the framebuffer, which
is already mapped as cache coherent physical memory. Prevent mmap() from
using its own attributes which may otherwise conflict.
Devices aren't mapped within the KVA, and with the way 64-bit hashes the
addresses pte_vatopa() may not return a 0 physical address for a device.
MFC after: 1 week
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
This allows modules creating mappings to be loaded post-boot, after SMP has
started. Without this, the TLB1 mappings can become unsynchronized and lead
to kernel page faults when accessed on the alternate CPUs.
MFC after: 3 weeks
PowerPC kernels in r6 is actually metadata from loader(8) or gibberish
left in r6, which is not required to be anything under the
PAPR/ePAPR/CHRP/OF standards, by another boot loader.
Note that, as a result, systems need a new boot loader to boot PPC kernels
after this revision without ending up at a mountroot prompt. New boot
loaders are backwards compatible and can boot older kernels.
Reviewed by: jhibbits
MFC after: 2 months
just set it to a large default value (and inherit any previously existing
value), hoping it never turns over. Instead, silently allow spurious
one-shots from rollovers.
MFC after: 10 days
