to not just do it. It is his new code that is being actively
developed so he has say over it. ru's direct changes were premature
as they occurred less than 4 hours after it was committed to the tree.
2) Running `mdconfig -l` without any attached devices results in
mdconfig printing "md0" to standard output.
Submitted by: dd [1]
[1] no, not "dd(1)" but "Dima Dorfman"
being:
# size offset fstype [fsize bsize bps/cpg]
a: 400M 0 4.2BSD 4096 16384 75 # (Cyl. 0 - 812*)
b: 1G * swap
c: * * unused
e: 204800 * 4.2BSD
f: 5g * 4.2BSD
g: * * 4.2BSD
These patches are the original work of Randell Jesup, and
I believe Matt Dillon, with additional work by Warner Losh.
Please let me know if I've left someone out.
Incorporated into this is the fix for PR bin/22727.
This patchset still has style issues and a possible problem on
large disks. However, it was a agreed to get these committed before
performing major surgery on them.
PR: bin/22727
Submitted by: Randell Jesup <rjesup@wgate.com>
userland tool:
Use the vfs.devfs.generation sysctl to test for devfs presense
(thanks phk!) when devfs is active it will not try to create the
device nodes in /dev and therefore will not complain about the
failure to do so.
Revert the change in the #define for VINUM_DIR in the kernel
header so that vinum can find its device nodes.
Replace perror() with vinum_perror() to print file/line when
DEVBUG is defined (not defined by default).
kernel:
Don't use the #define names for the "superdev" creation since
they will be prepended by "/dev/" (based on VINUM_DIR), instead
use string constants.
Create both debug and non-debug "superdev" nodes in the devfs.
Problem noticed and fix tested by: Martin Blapp <mblapp@fuchur.lan.attic.ch>
actually in the kernel. This structure is a different size than
what is currently in -CURRENT, but should hopefully be the last time
any application breakage is caused there. As soon as any major
inconveniences are removed, the definition of the in-kernel struct
ucred should be conditionalized upon defined(_KERNEL).
This also changes struct export_args to remove dependency on the
constantly-changing struct ucred, as well as limiting the bounds
of the size fields to the correct size. This means: a) mountd and
friends won't break all the time, b) mountd and friends won't crash
the kernel all the time if they don't know what they're doing wrt
actual struct export_args layout.
Reviewed by: bde
Use sysctlbyname() instead of sysctl().
Clear up and simplify the version extraction code.
Attempt to detect stretches of zeroes in the dump and avoid writing
them to disk to save space and time.
address is configured on a interface. This is useful for routers with
dynamic interfaces. It is now possible to say:
0100 allow tcp from any to any established
0200 skipto 1000 tcp from any to any
0300 allow ip from any to any
1000 allow tcp from 1.2.3.4 to me 22
1010 deny tcp from any to me 22
1020 allow tcp from any to any
and not have to worry about the behaviour if dynamic interfaces configure
new IP numbers later on.
The check is semi expensive (traverses the interface address list)
so it should be protected as in the above example if high performance
is a requirement.
to be the same as -ragged in the current implementation) to
-ragged. With mdocNG, -filled displays produce the correct
output, formatted and justified to both margins.
field, so it was possible for a filesystem marked clean by fsck_ffs
to cause kernel crashes later when mounted. This could occur when
fsck_ffs was used to repair a badly corrupted filesystem.
As pointed out by bde, it is not sufficient to restrict di_size to
just the superblock fs_maxfilesize limit. The use of 32-bit logical
block numbers (both in fsck and the kernel) induces another file
size limit which is usually lower than fs_maxfilesize. Also, the
old 4.3BSD filesystem does not have fs_maxfilesize initialised.
Following this change, fsck_ffs will enforce exactly the same
file size limits as are used by the kernel.
PR: kern/15065
Discussed with: bde
Reviewed by: bde, mckusick
Removed used copies of ../mount/getmntopts.c ../mount/mntopts.h. Use the
versions in ../mount directly like all other mount utilities.
Removed used copy of ../mount/pathnames.h. Use the version in ../mount
for free as a side effect of using the mntopts files there. We should
not use it at all, since the 2/3 of the definitions in it are in <paths.h>
and the other 1/3 should be in ../mountd/pathnames.h and is not used by
mount_ifs anyway.
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
Zsh users can add the following to their .zshrc for sysctl completion:
function listsysctls {
case $1 in
*.*) set -A reply $(sysctl -AN ${1%.*}) ;;
*) set -A reply $(sysctl -AN) ;;
esac
}
compctl -K listsysctls sysctl
While I'm here, brucify the getopt() switch.
reserved and now allocated TCP flags in incoming packets. This patch
stops overloading those bits in the IP firewall rules, and moves
colliding flags to a seperate field, ipflg. The IPFW userland
management tool, ipfw(8), is updated to reflect this change. New TCP
flags related to ECN are now included in tcp.h for reference, although
we don't currently implement TCP+ECN.
o To use this fix without completely rebuilding, it is sufficient to copy
ip_fw.h and tcp.h into your appropriate include directory, then rebuild
the ipfw kernel module, and ipfw tool, and install both. Note that a
mismatch between module and userland tool will result in incorrect
installation of firewall rules that may have unexpected effects. This
is an MFC candidate, following shakedown. This bug does not appear
to affect ipfilter.
Reviewed by: security-officer, billf
Reported by: Aragon Gouveia <aragon@phat.za.net>
extension.
Add ability to create a preload disk giving an address and a length
(suggested by imp)
Fix bug relating to very small md(4) devices.
Update md.c copyright to reflect the status of code copied from vn.c.
(noticed by dillon)
I decided to work on the md(4) driver and integrate the vn(4)
functionality into it mainly based on the name being more suitable.
Ideally 'vd' as in "virtual disk" would probably be the most logical
but our sound-master pointed out that this would cause uncontrollable
fits of giggles in the brits. Another complication would the needed
changes to the ramdisk boot/root functionality.
The vn driver will stay around for some time after I complete this
merge for transition reasons, and I'll make it whine to people that
they should migrate to the md(4) driver for some time before it
dies.
The kernel part of the new md(4) driver will be committed after more
testing.
parallel fsck's one per drive, use the shortest prefix ending in
a digit rather than the longest prefix ending in a digit.
This makes "/dev/ad0s1a" and "/dev/ad0s2a" appear to both reside
on the disk "/dev/ad0" and consequently they will be fsck'ed
sequentially rather than in parallel as now.
In general this heuristic is rather soft and errorprone. For
instance ccd may often reside on two or more physical disks. A
good solution would be to look for passes larger than 1 until no
disks are found in a particular pass, that way people could put
ccd stripes in pass 3... and have them fsck'ed sequentially.
Reviewed by: mjacob
directories in addition to world-writable directories. As before,
this check can be disabled with the "-i" option, which in turn can
be made the default for boot-up by setting "ldconfig_insecure=YES"
in "/etc/rc.conf".
Also fix an mdoc nit in the manual page.
Submitted by: Maxime Henrion <mux@qualys.com>
a SIGINFO (normally via Ctrl-T), a line will be output indicating
the current phase number and progress information relevant to the
current phase.
Approved by: mckusick
corrects cases where restore would spew an infinite stream of
"Changing volumes on pipe input?" messages, or would loop waiting
for a response to the "set owner/mode for '.'" question.
PR: bin/14250
Reviewed by: dwmalone
We need to parse the arguments first, then open the device (if
specified) and then apply the changes. This change will disallow the
(undocumented) use of multiple instances of the same argument on the
same command line for the sack of a better error message.
Other changes are:
1) the softupdates (-n) now issue a warning about remaining unchanged
2) the usage and man page is changed to specify "space | time" instead of
"optimization preference".
PR: bin/23335
Submitted by:Mark Peek <mark@whistle.com>
Remove some PNP-related dead code that is unlikely to survive the
changes in -current PNP anyway.
Submitted by: fixes from Chris Faulhaber <jedgar@freebsd.org>
files. Mostly -I${.CURDIR} was needed -- especially for YACC generated
files as the new cpp does not look in the ultimate source file
(ie, the .y file)'s directory as told by the "#line" directive. Some were
misspellings of "-I${.CURDIR}" as "-I.".
touch ups. The cache needs to be flushed against block
reads, and a final flush at process termination to force the
backup superblocks to disk.
I believe this will allow 'make release' to complete.
Submitted by: Tor.Egge@fast.no
returns doesn't exist, or doesn't match the desired device, fall back to
scanning /dev for a matching node, and as a last resort, if that fails,
try to create the node ourselves as /dev/dump.
Add comments to several variables and functions.
Clean up syslog(3) usage; use %m instead of strerror(3).
Other minor cleanup.
for large scsi disks with WCE = 0. This yields around a 7 times speedup
on elapsed newfs time on test disks here. 64k clusters seems to be the
sweet spot for scsi disks using our present drivers.
mount_ifs: repocopy of sbin/mount, with most of the intelligence ripped out
and "ufs" replaced with "ifs" in the right places. It will only
mount a single filesystem, rather than the -t <type> magic that
our real mount does.
fsck_ifs: repocopy of sbin/fsck_ffs, but the directory structure stuff
(pass2 and some refcount checks) has been #ifdef'ed out.
src/sbin/Makefile: Build these two utilities
There is probably cruft code left in both which can be removed at a later
date, especially in mount_ifs, but I trust that people will not try
mount_ifs -a ..
Note: there are no man pages installed for these two commands as I haven't
actually written them yet.
Approved by: rwatson
Obtained from: NetBSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
Approved by: rwatson
Obtained from: NetbSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
utilities which use bits of fsck_ffs - namely quotacheck and fsdb.
In depth, utilities.c contains blockcheck() which is needed by both,
but also a slew of routines which require bits of the FFS code to be
compiled in. This breaks the fs-specific and non-fs-specific code
up into two files (well, blockcheck() is the only routine in utilities.c,
that'll change later) which makes building fsck_ffs, quotacheck and
fsdb work yet again.
(You won't find commits to fsdb and quotacheck here before I haven't
committed the post-fsck-wrappers version of them yet.)
Approved by: rwatson
Obtained from: NetBSD-current source tree
The beginnings of the fsck wrappers stuff from NetBSD. This particular commit
brings a newly repo-copied sbin/fsck_ffs/ (from sbin/fsck/) into fsck wrappers
mode.
A quick overview (the code reflects this):
* Documentation changed to reflect fsck_ffs instead of fsck
* Simply acts on a single filesystem, doesn't try to do any multiple filesystem
magic - this is done by the fsck wrappers now
And then specific to fsck_ffs:
* link to /sbin/fsck_4.2bsd and /sbin/fsck_ufs. This is because right now
the filesystem is of type ufs not ffs, and that during autodetection the
labeltype rather than the VFS type is used - this is because when doing
an autodetection of filesystem type in the fsck wrapper program, it does
not have any link between label type (4.2bsd, vinum, etc) and VFS string.
Note that this shouldn't break a build since the required buildworld Makefile
magic and import of the fsck wrapper code into src/sbin/fsck/ will happen
in a seperate commit.
argument only. Before that, the `route add default gateway' first tried
the `gateway' as network address and passed its name to getnetbyname(3),
which in the BIND resolution case does the T_PTR lookup on that name.
1) use devname() instead of searching /dev for the dump device
2) use fopen() instead of open() so we don't need to differentiate
between compressing and not compressing when writing the core
file or the kernel (zopen() returns a FILE *, so we just use
fwrite() in both cases)
There should be no functional changes.
