like we have on other platforms. Move savectx() to <machine/pcb.h>.
A lot of files got these MD prototypes through the indirect inclusion
of <machine/cpu.h> and now need to include <machine/md_var.h>. The
number of which is unexpectedly large...
osf1_misc.c especially is tricky because szsigcode is redefined in
one of the osf1 header files. Reordering of the include files was
needed.
linprocfs.c now needs an explicit extern declaration.
Tested with: LINT
expand to __attribute__((packed)) and __attribute__((aligned(x)))
respectively. Replace the handful of gcc-ism's that use
__attribute__((aligned(16))) etc around the kernel with __aligned(16).
There are over 400 __attribute__((packed)) to deal with, that can come
later. I just want to use __packed in new code rather than add more
gcc-ism's.
machine_checks.
This fixes pci config reads for non existing devices on secondary
pci busses.
Thanks to Andrew Gallatin for pointing me to the register
Reviewed by: gallatin
Approved by: gallatin
the tokens are legal ANSI-C. Maybe to enable 'op' to be a macro itself?
Anyway, with the ## concatenation Gcc 3.1's integrated `cpp' treats "=op("
as a single token vs. the three tokens it is.
and it's associated state variables: icu_lock with the name "icu". This
renames the imen_mtx for x86 SMP, but also uses the lock to protect
access to the 8259 PIC on x86 UP. This also adds an appropriate lock to
the various Alpha chipsets which fixes problems with Alpha SMP machines
dropping interrupts with an SMP kernel.
- The MD functions critical_enter/exit are renamed to start with a cpu_
prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
count and a per-thread critical section saved state set when entering
a critical section while at nesting level 0 and restored when exiting
to nesting level 0. This moves the saved state out of spin mutexes so
that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
cpu_critical_enter/exit. MI code such as device drivers and spin
mutexes use the MI wrappers. Note that since the MI wrappers store
the state in the current thread, they do not have any return values or
arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
assigned to curthread->td_savecrit during fork_exit().
Tested on: i386, alpha
- fix KV macro in t2_pci.c to include the sable_lynx_base variable
so that the T2 CSRs can be found on lynxes. Current should be
bootable on lynxes now.
out nearly every platform but the one I tested on requires the intpin
to swizzle out the correct intline.
tested by: Martijn Pronk <mpkisbkl@xs4all.nl> (lca_pci)
the interface conversion to platform.pci_intr_route(). I've left the
platform.pci_intr_route() function pointer in place, as well as
alpha_pci_route_interrupt(), but no platform currently implements it.
To work around the removal of alpha_platform_assign_pciintr(cfg);
from the pci probe code, I've hooked in calls to platform.pci_intr_map()
in pcib_read_config (similar to the x86 APIC_IO ifdef in pci_cfgregread)
for every chipset that has a platform which needs it.
While here, I've removed the interupt mapping/routing code from the
AS2x00 platform because its not required (it has never been present in
-stable).
Tested on: UP1000, Miata(GL), XP1000, AS2100, AS500
all alphas with devices behind ppb's. I'm working on a better solution now.
Note that all alphas that use per-platform interrupt mapping are broken
again (as they have been for several months)
breakage:
- call PCIB_ROUTE_INTERRUPT() regardless of how valid the intline looks.
Some alphas leave garbage in the intline and leave the intr mapping
to OS platform support routines that map slots/buses to intlines
- Down in the alpha pci code, first try platform.pci_intr_route() and
if it doesn't exist or returns garbage, just read the intline out of
config space.
tested on AS500 (garbage in intline) and UP1000 (PC-like, intline is valid)
Note that a nice little hack like the APIC_IO section of pci_cfgregread()
is not workable. This is because the calling interface for
alpha_pci_route_interrupt() requires us to figure out the bus/slot/etc
from a device_t. At pci_read_device() time, we don't have a device_t
for the bus/slot/func in question.
the chipset. This is already how the multi-hose systems handle resource
allocation and it fixes a bug where dense and bwx memory allocations were
not handled properly.
Reviewed by: gallatin
- Move PCI core code to dev/pci.
- Split bridge code out into separate modules.
- Remove the descriptive strings from the bridge drivers. If you
want to know what a device is, use pciconf. Add support for
broadly identifying devices based on class/subclass, and for
parsing a preloaded device identification database so that if
you want to waste the memory, you can identify *anything* we know
about.
- Remove machine-dependant code from the core PCI code. APIC interrupt
mapping is performed by shadowing the intline register in machine-
dependant code.
- Bring interrupt routing support to the Alpha
(although many platforms don't yet support routing or mapping
interrupts entirely correctly). This resulted in spamming
<sys/bus.h> into more places than it really should have gone.
- Put sys/dev on the kernel/modules include path. This avoids
having to change *all* the pci*.h includes.
files which Compaq open-sourced (with a BSD license).
This commit adds support for proper PCI interrupt mapping and much
better support for swizzling between "standard" isa IRQs and the stdio
irqs used by the t2. This also adds enabling/disabling/eoi support
for AlphaServer 2100A machines. The 2100A (or lynx) interrupt
hardware is is very different (and much nicer) than the 2100.
Previously, only AS2100 and AS2000 machines worked.
This commits also lays the groundwork for supporting ExtIO modules.
These modules are essentially a second hose. This work is left
unfinished pending testing on real hardware. Wilko tells me that
ExtIO modules are quite rare, and may not actually exist in the wild.
Obtained from: Tru64
Tested by: wilko
tweak to enable/disable interrupt sources. Seems to work. It is unclear
how many of the PC164 models actually might needs this, and whether or
not there are other hidden issues.
Obtained from:Bernd Walter <ticso@cicely8.cicely.de>
like the args to the config space accessors these functions replaced.
This reduces the likelyhood of overflow when the args are used in
macros on the alpha. This prevents memory management faults when
probing the pci bus on sables, multias and nonames.
Approved by: dfr
Tested by: Bernd Walter <ticso@cicely8.cicely.de>
- move the call to cia_init_sgmap() to after we've determined if we're a pyxis
- convert needed splhigh() in cia_sgmap_invalidate_pyxis() to disable_intr()
Previously, any isa DMA on a pyxis based machine would cause a panic
in cia_sgmap_invalidate_pyxis() because the pyxis workaround was never
setup.
- while i'm at it, convert needed splhigh() in cia_swiz_set_hae_mem to
disable_intr()
- Make softinterrupts (SWI's) almost completely MI, and divorce them
completely from the x86 hardware interrupt code.
- The ihandlers array is now gone. Instead, there is a MI shandlers array
that just contains SWI handlers.
- Most of the former machine/ipl.h files have moved to a new sys/ipl.h.
- Stub out all the spl*() functions on all architectures.
Submitted by: dfr
machines. The patch uses an existing global variable in place of the
newbus accessor to get at use_bwx.
This is a quick fix to get miatas booting again; somebody
with more newbus skills than I can muster will have to correct it.
Matt Jacob's description of the problem from the -alpha list:
The IVAR accessor stuff for pcib is incompletely specified for CIA. There's
only one accessor defined, and that's to get the BUS instance number.
<..>
The device methods that try and get at the use_bwx get overriden because
there's only one ivar for CIA's pcib, and that's for hose #, and it's always
zero.
foo_pcib_[read|write]_config() functions rather than relying on
a break or return being in the CFG macro.
This fixes a panic later in the boot process on a UP1000. From
inspection, it looks like this fixes a similar problem in the tsunami code.
Approved by: dfr
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
which call busspace.
* Rework pci config accesses to route through the pcib device instead of
calling a MD function directly.
With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
Instead, for now (until we get a pci infrastructure cleanup),
assign the PCI bus number to be mcpcia bus instance << 4. This
is to allow secondary bridges some room to be recongnized on
4100 systems.
SYSCTL_LONG macro to be consistent with other integer sysctl variables
and require an initial value instead of assuming 0. Update several
sysctl variables to use the unsigned types.
PR: 15251
Submitted by: Kelly Yancey <kbyanc@posi.net>
Only PCI and on-board ISA peripherials are supported at this time.
This support has been only lightly tested due to a lack of response to my
call for testers on the freebsd-alpha mailing list. It works quite well
on the one AS2100 on which it has been tested, but it may not work on
an AS2100A and should therefore be regarded as experimental.
chipsets. An example of this is the USB controller on these chipsets.
With this, I can now use USB devices on the test Alpha I am borrowing at
the moment.
Reviewed by: dfr, obrien
from DWLPX to PCI space. Just a methods holder such that we have a parent
which is a "pcib" and we create a child which is a "pci". Add the appropriate
ivar code (which is for a hose #).
