of the device id.
- Use BAR2 rather than BAR0 for the Rocketport UPCI 8O card. I suspect
that other UPCI cards might need to use BAR2 as well.
Tested by: wsk at gddsn dot org dot cn
MFC after: 1 week
actual root file system is mounted, the first entry on the mountlist
is not the root file system and the timestamp for that entry is
typically 0. Passing that to inittodr() caused annoying errors on
alpha and ia64.
So, call inittodr() for all file systems on mountlist, but only when
the timestamp (mnt_time) is non-zero.
with the wrong language parameter when retrieving the device serial
number. This invalid request caused some devices not to work at
all.
PR: usb/79190
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
fields that got added to it recently-ish. While here document
what each of the fields is based on discussion with portmgr@.
Patch from: murray (slightly adapted)
MFC after: 1 day
Instead, explicitly enable them when we setup the interrupt handler.
Also, move the setting of stathz and profhz down to the same place so
that the code flow is simpler and easier to follow.
- Don't setup an interrupt handler for IRQ0 if we are using the lapic timer
as it doesn't do anything productive in that case.
Replace a KASSERT of LINUX_IFNAMSIZ == IFNAMSIZ with a preprocessor
check and #error message. This will prevent nasty suprises if users
change IFNAMSIZ without updating the linux code appropriatly.
LD_LIBMAP_DISABLE, LD_LIBRARY_PATH) are used, then make sure the
libraries being loaded aren't on a noexec-mounted filesystem.
This is a compromise position: I'm assuming that nobody will be silly
enough to set the noexec mount flag on part of the default library
path, in order to avoid adding extra overhead into the common case
(where those environment variables aren't used).
Discussed with: csjp, secteam
MFC after: 1 week
lockmgr locks that this thread owns. This is complicated due to
LK_KERNPROC and because lockmgr tolerates unlocking an unlocked lock.
Sponsored by: Isilon Systes, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
lookup to do shared locks on the root. Filesystems are free to ignore
flags and instead acquire an exclusive lock if they do not support
shared locks.
Sponsored by: Isilon Systems, Inc.
before it can call VOP_INACTIVE(). This must use the EXCLUPGRADE path
because we may violate some lock order with another locked vnode if
we drop and reacquire the lock. If EXCLUPGRADE fails, we mark the
vnode with VI_OWEINACT. This case should be very rare.
- Clear VI_OWEINACT in vinactive() and vbusy().
- If VI_OWEINACT is set in vgone() do the VOP_INACTIVE call here as well.
Sponsored by: Isilon Systems, Inc.
necessary since we disable the shared locks in vfs_cache, but it is
prefered that the option not leak out into filesystems when it is
disabled.
Sponsored by: Isilon Systems, Inc.
config option have now been fixed. All filesystems are properly locked
and checked via DEBUG_VFS_LOCKS. Remove the workaround code.
Sponsored by: Isilon Systems, Inc.
non-maskable).
- The NFS client needs to guard against spurious wakeups
while waiting for the response. ltrace causes the process
under question to wakeup (possibly from ptrace()), which
causes NFS to wakeup from tsleep without the response being
delivered.
Submitted by: Mohan Srinivasan
disables tag queuing temporarily in order to allow controllers a window
to safely perform transfer negotiation with non-compliant devices. Before
this change, CAM would restore the queue depth to the controller specified
maximum or device quirk level rather than any depth determined by reactions
to QUEUE FULL/BUSY events or an explicit user setting.
During device probe, initialize the flags field for XPT_SCAN_BUS.
The uninitialized value often confused CAM into not bothering to
issue an AC_FOUND_DEVICE async event for new devices. The reason
this bug wasn't reported earlier is that CAM manually announces
devices after the initial system bus scans.
MFC: 3 days
- Update the description of the cdrom.1 target and add notes for cdrom.2
and cdrom.3.
- Document CD_PACKAGES_TREE (CD_EXTRA_BITS wasn't documented before).
- Document CVSARGS.
- Remove DISC[12]_{LABEL,NAME}.
- Remove NOPORTREADMES.
- Remove references to drivers.conf files and man page.
- Update version number for a CURRENT snapshot to 6.0.
