integer. Presently, our implementation employs an approach that
converts the value to int64_t, then back to int, unfortunately,
this approach can be problematic when the the difference between
the two time_low is larger than 0x7fffffff, as the value is then
truncated to int.
To quote the test case from the original PR, the following is
true with the current implementation:
865e1a56-b9d9-11d9-ba27-0003476f2e88 < 062ac45c-b9d9-11d9-ba27-0003476f2e88
However, according to the DCE specification, the expected result
should be:
865e1a56-b9d9-11d9-ba27-0003476f2e88 > 062ac45c-b9d9-11d9-ba27-0003476f2e88
This commit adds a new intermediate variable which uses int64_t
to store the result of subtraction between the two time_low values,
which would not introduce different semantic of the MSB found in
time_low value.
PR: 83107
Submitted by: Steve Sears <sjs at acm dot org>
MFC After: 1 month
sofree(), as a number of protocols expect to be able to call
soisdisconnected() during detach. That may not be a good assumption,
but until I'm sure if it's a good assumption or not, allow it.
alloc'ing mbufs so that there is less error handling required.
- Go ahead and account for the data space in the first mbuf before entering
the loop to alloc more mbuf's. This simplifies the loop logic and avoids
confusing Coverity.
CID: 817
Reviewed by: sam
Tested by: pjd
Found by: Coverity Prevent (tm)
tcp_twstart(), but not to the other, tcp_detach(), as the socket is
already being torn down and therefore there are no listeners. This avoids
a panic if kqueue state is registered on the socket at close(), and
eliminates to XXX comments. There is one case remaining in which
tcp_discardcb() reaches up to the socket layer as part of the TCP host
cache, which would be good to avoid.
Reported by: Goran Gajic <ggajic at afrodita dot rcub dot bg dot ac dot yu>
vfs_rel() on the mountpoint if the MAC checks fail in kern_statfs() and
kern_fstatfs(). Similarly, don't perform an extra vfs_rel() if we get
a doomed vnode in kern_fstatfs(), and handle the case of mp being NULL
(for some doomed vnodes) by conditionalizing the vfs_rel() in
kern_fstatfs() on mp != NULL.
CID: 1517
Found by: Coverity Prevent (tm) (kern_fstatfs())
Pointy hat to: jhb
init(8), to avoid losing a race to them and dying before being able
to call reboot(2).
PR: bin/64664
Submitted by: maxim
Obtained from: NetBSD
MFC after: 30 days
eliminating a second set of identical mutex operations at the bottom.
This allows brief exceeding of the max sockets limit, but only by
sockets in the last stages of being torn down.
PowerPC-based Apple's machines and small utility to do it from
userland modelled after the similar utility in Darwin/OSX.
Only tested on 1.25GHz G4 Mac Mini.
MFC after: 1 month
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write(). However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.
The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567. The short version is that I'm
trying to clean up and fix our support for execute access.
Reviewed by: marcel@ (ia64)
vlan tag processing, the code will use bcopy() to remove the vlan
tag field but the code copies 2 bytes too many, which essentially
overwrites the protocol type field.
Also, a tag value of -1 is generated for unrecognized interface type,
which would cause an invalid memory access in the vlans[] array.
In addition, removed a line of dead code and its associated comments.
Reviewed by: sam
- Change the workaround for the autopad/checksum offload bug so that
instead of lying about the map size, we actually create a properly
padded mbuf and map it as usual. The other trick works, but is ugly.
This approach also gives us a chance to zero the pad space to avoid
possibly leaking data.
- With the PCIe devices, it looks issuing a TX command while there's
already a transmission in progress doesn't have any effect. In other
words, if you send two packets in rapid succession, the second one may
end up sitting in the TX DMA ring until another transmit command is
issued later in the future. Basically, if re_txeof() sees that there
are still descriptors outstanding, it needs to manually resume the
TX DMA channel by issuing another TX command to make sure all
transmissions are flushed out. (The PCI devices seem to keep the
TX channel moving until all descriptors have been consumed. I'm not
sure why the PCIe devices behave differently.)
(You can see this issue if you do the following test: plug an re(4)
interface into another host via crossover cable, and from the other
host do 'ping -c 2 <host with re(4) NIC>' to prime the ARP cache,
then do 'ping -c 1 -s 1473 <host with re(4) NIC>'. You're supposed
to see two packets sent in response, but you may only see one. If
you do 'ping -c 1 -s 1473 <host with re(4) NIC>' again, you'll
see two packets, but one will be the missing fragment from the last
ping, followed by one of the fragments from this ping.)
- Add the PCI ID for the US Robotics 997902 NIC, which is based on
the RTL8169S.
- Add a tsleep() of 1 second in re_detach() after the interrupt handler
is disconnected. This should allow any tasks queued up by the ISR
to drain. Now, I know you're supposed to use taskqueue_drain() for
this, but something about the way taskqueue_drain() works with
taskqueue_fast queues doesn't seem quite right, and I refuse to be
tricked into fixing it.
- If we fail to register the system call during MOD_LOAD, then note that
so that we don't try to deregister it or invoke the chained event handler
during the subsequent MOD_UNLOAD event. Doing the deregister when the
register failed could result in trashing system call entries.
- Add a SI_SUB_SYSCALLS just before starting up init and use that to
register syscall modules instead of SI_SUB_DRIVERS. Registering system
calls as late as possible increases the chances that any other module
event handlers or SYSINITs in a module are executed to initialize the
data in a kld before a syscall dependent on that data is able to be
invoked.
MFC after: 3 days
cache when unloading the nfsserver module. This fixes a memory leak and
a stale pointer.
- Use callout_drain() rather than callout_stop() when unloading the
nfsserver module.
MFC after: 3 days
- Right justify 'pid' label.
- Move the uid column to the right 2 columns so that the 3 process id
columns (pid, ppid, pgrp) are grouped together.
- Expand the uid column to 5 chars.
- Don't indent the tid for multithreaded processes.
Requested by: bde (1, 2, 4)
