Specify that the only supported architecture for a.out is ia32 (either
i386 or amd64 host kernel).
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32960
This requires moving net.link.generic sysctl declaration from if_mib.c
to if.c. Ideally if_mib.c needs just to be merged to if.c, but they
have different license texts.
Differential revision: https://reviews.freebsd.org/D33263
Sweep over potentially unsafe calls to ifnet_byindex() and wrap them
in epoch. Most of the code touched remains unsafe, as the returned
pointer is being used after epoch exit. Mark that with a comment.
Validate the index argument inside the function, reducing argument
validation requirement from the callers and making V_if_index
private to if.c.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33263
Now it is possible to just merge all this complexity into single
linear function. Note that IFNET_WLOCK() is a sleepable lock, so
we can M_WAITOK and epoch_wait_preempt().
Reviewed by: melifaro, bz, kp
Differential revision: https://reviews.freebsd.org/D33262
So let's just call malloc() directly. This also avoids hidden
doubling of default V_if_indexlim.
Reviewed by: melifaro, bz, kp
Differential revision: https://reviews.freebsd.org/D33261
Now that if_alloc_domain() never fails and actually doesn't
expose ifnet to outside we can eliminate IFNET_HOLD and two
step index allocation.
Reviewed by: kp
Differential revision: https://reviews.freebsd.org/D33259
For AHCI attached devices, we report the location and identification
information of the AHCI controller that we're attached to. We also
don't reprot link speed in that case, since we can't get to the PCIe
config space registers to find that out.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33287
When an NVME device is attached via a AHCI controller, we have no access
to its config space. So instead of information about the nvme drive
itself, return info about the AHCI controller as the next best
thing. Since the Intel Hardware RAID support looks at these values, this
likely is best.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33286
Add a quirk to flag AHCI attachment to the controller. This is for any
of the strategies for attaching nvme devices as children of the AHCI
device for Intel's RAID devices. This also has a side effect of cleaning
up resource allocation from failed nvme_attach calls now.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33285
Prior to NVMe 1.3, Intel produced a series of drives that had
performance alignment data in the vendor specific space since no
standard had been defined. Move testing the versions to a quick so the
NVMe NS code doesn't know about PCI device info.
Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D33284
Disable the dummynet tests when running the ci tests. This avoids
running into the panic described in https://reviews.freebsd.org/D33064
(where an interface is removed but a dummynet queued packet still has a
pointer to it).
These tests can be re-enabled when the work in
https://reviews.freebsd.org/D33267 lands.
Sponsored by: Rubicon Communications, LLC ("Netgate")
This ensures that LAPIC calibration is done using the correct tsc_freq
value, i.e., the one associated with the TSC timecounter. It does mean
though that TSC calibration cannot use sbinuptime() to read the
reference timecounter, as timehands are not yet set up.
Reviewed by: kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33209
This ensures that we have a good reference timecounter for performing
calibration.
Change lapic_setup to avoid configuring the timer when booting, and move
calibration and initial configuration to a new lapic routine,
lapic_calibrate_timer. This calibration will be initiated from
cpu_initclocks(), before an eventtimer is selected.
Reviewed by: kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33206
The headers were mostly identical on amd64 and i386.
No functional change intended.
Reviewed by: cperciva, mav, imp, kib, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33205
When rack sends out a TLP it sets up various state to make sure
it avoids the cwnd (its been more than 1 RTT since our last send) and
it may at times send new data. If an MTU change as occurred
and our cwnd has collapsed we can have a situation where must_retran
flag is set and we obey the cwnd thus never sending the TLP and then
sitting stuck.
This one line fix addresses that problem
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D33231
Seems like a copy-paste error, or at least this made more sense when the
sio(4) driver still existed. This modifies the debug port name displayed
at boot, but otherwise has no functional change.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D33278
Add a somewhat more extensive pfsync defer mode test. Ensure that pfsync
actually delays the state creating packet until after it has sent the
pfsync update and given the peer time to create the state.
Ideally the test should validate the pfsync state update and generate an
ack message, but to keep the test simple we rely on the timeout of the
deferred packet instead.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33245
When we exposed the PFSYNCF_OK flag to userspace in 5f5bf88949d we
unintentionally caused defer mode to always be enabled.
The ioctl check only looked for nonzero, not for the PFSYNCF_DEFER flag.
Fix this check and ensure ifconfig sets the flag.
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33244
* Ensure we unlock the pfsync lock in pfsync_defer()
* We must hold the bucket lock when calling pfsync_push()
* The pfsync_defer_tmo() callout locks the bucket lock, not the pfsync
lock
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33243
Don't use a fixed number of ticks, but take hz into account so we have a
consistent timeout, regardless of what hz is set up.
Use a 20ms timeout, becaues that's what OpenBSD uses.
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33242
This flag is stored in if_drv_flags, not if_flags.
Reviewed by: glebius
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33241
In pfsync_defer() we must wait to lock sc until we've ensured it's not
NULL.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33240
19dc644511 added if_stf.h, which had previously been removed.
We have to remove it from ObsoleteFiles.inc to ensure that it's not
unintentionally uninstalled again.
Reported by: Herbert J. Skuhra <herbert@gojira.at>
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33247
Currently the type isn't set in the fbtype struct so any userland
program that call the FBIOGTYPE ioctl will think it's a FBTYPE_SUN1BW
which is far from the truth.
No app that I found find checks the type but at least now it's correct.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33221
6d1699583d7e added the FBIOGXINFO,FBIOMONINFO and FBIOPUTCMAPI/FBIOGETCMAPI
ioctls and said that implementation in driver will come later.
Since it was in 2001 I think we can remove this.
Reviewed by: emaste, imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33218
Differential Revision: https://reviews.freebsd.org/D33219
Differential Revision: https://reviews.freebsd.org/D33220
The cursors related ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33217
Commit 6d1699583d7e added the FBIOVERTICAL ioctl and said that implementation
in driver will come later.
Since it was in 2001 I think we can remove this.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
The FBIOSVIDEO/FBIOGVIDEO ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33216
The FBIOSATTR/FBIOGATTR ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33215
The FBIOGINFO ioctl was added in 1994 with the 4.4 Lite import but was commented.
Remove it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33211
Passing up such descriptors to iflib is obviously wasteful.
But the main conern is that we may overrun iri_frags array because of
them. That's been observed in practice.
Also, assert that the number of fragments / descriptors / segments is
less than IFLIB_MAX_RX_SEGS.
Reviewed by: gallatin, pkelsey
MFC after: 3 weeks
Sponsored by: Panzura LLC
Differential Revision: https://reviews.freebsd.org/D33189
According to information found on the internet the following products
use exactly the same hardware but probably different USB IDs:
- Edimax EW-7811Un V2 (v2)
- Edimax EW-7811GLN 2.0A (v2)
I am not adding them as I cannot verify.
PR: 254280
MFC after: 1 week
