Commit Graph

163052 Commits

Author SHA1 Message Date
Pyun YongHyeon
de53eba037 Fix build. 2011-05-07 04:40:44 +00:00
Adrian Chadd
ef1901a3c9 Change AR_SREV_OWL_{X}_OR_LATER to AR_SREV_5416_{X}_OR_LATER.
For now, these are equivalent macros. AR_SREV_OWL{X}_OR_LATER
will later change to exclude Howl (AR9130) in line with what
the Atheros HAL does.

This should not functionally change anything.

Obtained from:	Atheros
2011-05-07 02:59:24 +00:00
Adrian Chadd
d1915e7308 Fix the OWL revision checks.
A quick story, which is partially documented in the commit.

The silicon revision in Linux ath9k and the Atheros HAL use an
AR_SREV_REVISION mask of 0x07.

FreeBSD's HAL uses the AR5212 AR_SREV_REVISION mask of 0x0F.

Thus the OWL silicon revisions were coming through as 0xA, 0xB,
0xC, rather than 0x0, 0x1 and 0x2.

My ath9k-sourced AR_SREV_OWL_<X> macros were thus using the wrong
silicon revision values and wouldn't correctly match.

This commit does a few things:

* Change the AR_SREV_OWL_<x> macros to use the AR_SREV_REVISION_OWL_*
  values, not AR_XSREV_REVISION_OWL macros;
* Disable AR_XSREV_REVISION_OWL_* values;
* Modify the IS_5416 to properly check the MAC is OWL, rather than
  potentially matching on non-OWL revisions (which shouldn't happen
  unless there's a silicon revision of higher than 0x9 in a later
  chip..)
* Add a couple more macros from the Atheros HAL for compatibility.

The main difference now is that the Atheros HAL defines
AR_SREV_OWL_{20,22}_OR_LATER subtly differently - it fails on all HOWL
silicon. The AR_SREV_5416_*_OR_LATER macros match on the relevant OWL
version -and- all HOWL versions, along with subsequent versions.

A subsequent commit is going to migrate the uses of AR_SREV_OWL_X_OR_LATER
to AR_SREV_5416_X_OR_LATER to match what's going on in the Atheros HAL.

There's only two uses of AR_SREV_OWL_X_OR_LATER which currently don't
apply to FreeBSD but it may do in the future.

Yes, it's all confusing!
2011-05-07 02:54:52 +00:00
Pyun YongHyeon
3ea23f341b Remove unneeded use of variable status. This should have been done
in r221557.
2011-05-07 02:19:46 +00:00
David E. O'Brien
9b2a96cc04 Add the ability to search for all the inlined instances of a given function.
Reviewed by:	jb
Obtained from:	Juniper Networks
2011-05-07 01:05:31 +00:00
Pyun YongHyeon
0b96ba12be XL_DMACTL is 32bit register, use 32bit write macro.
While I'm here add more bits for the register.
2011-05-07 00:25:12 +00:00
Pyun YongHyeon
7498e81a2d Rearm watchdog timer if driver kick controller to recover from TX
underrun error.
While here, prepend 0x to status code to show TX status is hex
number.
2011-05-07 00:18:58 +00:00
Pyun YongHyeon
48dcbc3370 Rename xl_stats_update() callout handler to xl_tick() and move MII
tick driving logic to xl_tick(). Now xl_tick() handles MII tick as
well as periodic updating of statistics.
This change removes a hack used in interrupt handler where it
wanted to update statistics without driving MII tick.
2011-05-07 00:06:02 +00:00
Pyun YongHyeon
4a5c788456 Reuse the TX descriptor(DPD) if xl_encap() failed instead of just
picking the next available one. This may explain why xl(4) sees TX
underrun error with no queued frame. I hope this addresses a long
standing xl(4) watchdog timeout issue as well.

Obtained from:	OpenBSD
2011-05-06 23:49:10 +00:00
Pyun YongHyeon
5a13764b11 Change xl_rxeof() a bit to return the number of processed frames in
RX descriptor ring. Previously it returned the number of frames
that were successfully passed to upper stack which in turn means it
ignored frames that were discarded due to errors. The number of
processed frames in RX descriptor ring is used to detect whether
driver is out of sync with controller's current descriptor pointer.
Returning number of processed frames reduces unnecessary (probably
wrong) re-synchronization.

While here, remove unnecessary local variable initialization.
2011-05-06 23:01:29 +00:00
Pyun YongHyeon
74517b0724 Terminate interrupt handler if driver detect it's not running.
Also add check for driver running state before trying to send
frames. While I'm here, use for loop.
2011-05-06 22:55:53 +00:00
Pyun YongHyeon
f321edf95a Updating status word should be the last operation of UPD structure
renewal.  Disable instruction reordering by adding volatile to
xl_list_onefrag structure.
2011-05-06 22:45:13 +00:00
Pyun YongHyeon
0ecf6b16c8 Call bus_dmamap_sync() only after TX DPD update. 2011-05-06 22:36:43 +00:00
Jilles Tjoelker
6ed74a0a1c sh: Track if the current locale's charset is UTF-8 or not. 2011-05-06 22:31:27 +00:00
Pyun YongHyeon
4f58a95ce1 Set status word once instead of twice. For 3C90xB/3C90xC, frame
length of status word is ignored. While here move bus_dmamap_sync()
up where DMA map is loaded.
2011-05-06 22:26:57 +00:00
Pyun YongHyeon
78564eda2d Remove unnecessary htole32/le32toh dance. 2011-05-06 22:16:43 +00:00
Pyun YongHyeon
dd0a76883f Rewrite RX filter logic and provide controller specific filter
handler for 3C90x and 3C90xB/C respectively.  This simplifies ioctl
handler as well as enhancing readability.
While I'm here don't reprogram multicast filter when driver is not
running.
2011-05-06 22:01:46 +00:00
Pyun YongHyeon
d2d0470dc6 Fix white space nits and style 2011-05-06 20:46:29 +00:00
Jilles Tjoelker
c76aed958b sh: Change the CTL* bytes to ones invalid in UTF-8.
This ensures that mbrtowc(3) can be used directly once it has been verified
that there is no CTL* byte. Dealing with a CTLESC byte within a multibyte
character would be complicated.

The new values do occur in iso-8859-* encodings. This decreases efficiency
slightly but should not affect correctness.

Caveat: Updating across this change and rebuilding without cleaning may
yield a subtly broken sh binary. By default, make buildworld will clean and
avoid problems.
2011-05-06 20:45:50 +00:00
Nathan Whitehorn
6533dd880e SMP has worked perfectly for a very long time on 32-bit PowerPC on both
UP and SMP hardware. Enable it in GENERIC.

MFC after:	2 weeks
2011-05-06 20:43:02 +00:00
Michael Tuexen
936fc35bb3 Change the name of an internal structure, since the name
is used by a structure of the (new) SCTP API.

MFC after: 1 week.
2011-05-06 20:40:33 +00:00
Pyun YongHyeon
26b8066bce Do not increment collision counter if transmit have failed.
Transmission error in tun(4) is queueing error(i.e. ENOBUFS) and it
has nothing to do with collision.

Reported by:	Zeus V Panchenko (zeus <> ibs dot dn dot ua)
2011-05-06 20:37:07 +00:00
Rick Macklem
f9de8782aa Move sys/nfsclient/nfs_kdtrace.h to sys/nfs/nfs_kdtrace.h so
it can be used by the new NFS client as well as the old one.
2011-05-06 20:02:19 +00:00
Rick Macklem
10ccc5e389 Fix the module dependency in nfs_kdtrace.c for the old NFS
client. This should fix a problem reported by Marcus Reid.
2011-05-06 19:55:15 +00:00
Ruslan Ermilov
751f92ecc8 MK_GPIO changed its default; reflect. 2011-05-06 19:14:06 +00:00
Ruslan Ermilov
a7a066b13f Removed trailing whitespace. 2011-05-06 19:13:03 +00:00
Ruslan Ermilov
64a9cf7693 Tidy up formatting. 2011-05-06 19:10:27 +00:00
Rick Macklem
1dcad8ec9a Set the initial value of maxfilesize to OFF_MAX in the
new NFS client. It will then be reduced to whatever the
server says it can support. There might be an argument
that this could be one block larger, but since NFS is
a byte granular system, I chose not to do that.

Suggested by:	Matt Dillon
Tested by:	Daniel Braniss (earlier version)
MFC after:	2 weeks
2011-05-06 17:51:00 +00:00
Nathan Whitehorn
a382909921 Simplify this code somewhat by only writing a 512-byte-sector APM map.
All firmwares can read it, we need to write one anyway for old OF
versions, and if a 512-byte one is present, OS X ignores the 2048-byte one
in favor of it.
2011-05-06 15:40:58 +00:00
Adrian Chadd
e7cb5d548d Add a function which enables or disables RX RIFS searching, and migrate
the code which does this into it.
2011-05-06 15:33:56 +00:00
Ruslan Ermilov
b40501fb67 Update to a 6-May-2011 release (upstreamed some of our changes). 2011-05-06 14:21:46 +00:00
Ruslan Ermilov
e2f76e526c Vendor import of bwk's 6-May-2011 release. 2011-05-06 14:08:24 +00:00
Ruslan Ermilov
f11de29169 Don't track the generated file. 2011-05-06 14:07:34 +00:00
Andriy Gapon
fdf30d59a6 prepare code that does topology detection for amd cpus for bulldozer
This also introduces a new detection path for family 10h and newer
pre-bulldozer cpus, pre-10h hardware should not be affected.

Tested by:	Gary Jennejohn <gljennjohn@googlemail.com>
		(with pre-10h hardware)
MFC after:	2 weeks
2011-05-06 13:51:54 +00:00
John Baldwin
f9a9473702 Retire isa_setup_intr() and isa_teardown_intr() and use the generic bus
versions instead.  They were never needed as bus_generic_intr() and
bus_teardown_intr() had been changed to pass the original child device up
in 42734, but the ISA bus was not converted to new-bus until 45720.
2011-05-06 13:48:53 +00:00
Alexander Motin
08aadbe3b4 Increase NFS_TICKINTVL value from 10 to 500. Now that callout does useful
things only once per second, so other 99 calls per second were useless and
just don't allow idle system to sleep properly.

Reviewed by:	rmacklem
2011-05-06 13:11:50 +00:00
Andrey V. Elsukov
318b735cc3 Convert delay parameter back to ms when reporting to user.
PR:		156838
MFC after:	1 week
2011-05-06 07:13:34 +00:00
Nathan Whitehorn
cc734417b3 Do not use Open Firmware to open the device and instead program its start
on our own. This prevents hangs at boot when using a bm(4) NIC where the
cable is not plugged in at boot time.

Obtained from:	NetBSD
MFC after:	1 week
2011-05-06 03:26:24 +00:00
Adrian Chadd
cc641d93c6 Fix GPIO_MAXPINS calculation for the AR71xx, AR724x, AR913x SoC.
Submitted by:	Luiz Otavio O Souza <loos.br@gmail.com>
2011-05-06 02:45:02 +00:00
Rick Macklem
78e4b1f838 Change the new NFS server so that it returns 0 when the f_bavail
or f_ffree fields of "struct statfs" are negative, since the
values that go on the wire are unsigned and will appear to be
very large positive values otherwise. This makes the handling
of a negative f_bavail compatible with the old/regular NFS server.

MFC after:	2 weeks
2011-05-06 01:29:14 +00:00
Navdeep Parhar
3792a4d286 Bump up the number of egress queues that the driver is allowed to use.
MFC after:	3 days
2011-05-05 23:09:17 +00:00
Jilles Tjoelker
a62ab0274a sh: Add $'quoting' (C-style escape sequences).
A string between $' and ' may contain backslash escape sequences similar to
the ones in a C string constant (except that a single-quote must be escaped
and a double-quote need not be). Details are in the sh(1) man page.

This construct is useful to include unprintable characters, tabs and
newlines in strings; while this can be done with a command substitution
containing a printf command, that needs ugly workarounds if the result is to
end with a newline as command substitution removes all trailing newlines.

The construct may also be useful in future to describe unprintable
characters without needing to write those characters themselves in 'set -x',
'export -p' and the like.

The implementation attempts to comply to the proposal for the next issue of
the POSIX specification. Because this construct is not in POSIX.1-2008,
using it in scripts intended to be portable is unwise.

Matching the minimal locale support in the rest of sh, the \u and \U
sequences are currently not useful.

Exp-run done by: pav (with some other sh(1) changes)
2011-05-05 20:55:55 +00:00
Michael Tuexen
48f65f00fa * Update copyright notice.
* Cleanup usage of iov's.
* Add support for SCTP_TIMEOUTS socketoption.
* Fix a bug in sctp_recvmsg(): return the msg_flags in case of an error.
* Fix a bug in the error handling of sctp_peeloff(): return the -1.
2011-05-05 19:49:27 +00:00
Nathan Whitehorn
88381ca3e3 Simplify this script somewhat, following excellent suggestions from
Ed Schouten.
2011-05-05 19:17:55 +00:00
Xin LI
8901793222 Detect and set Atom's Tj(max) to 90 if it's not the 45nm D400/D500/N400
series.

MFC after:	2 weeks
2011-05-05 19:15:15 +00:00
Alexander Motin
00aa5aab1e Some changes around LAPIC timer programming.
This fixes heavy interrupt storm and resulting system freeze when using
LAPIC timer in one-shot mode under Xen HVM. There, unlike real hardware,
programming timer with zero period almost immediately causes interrupt.
2011-05-05 18:56:48 +00:00
Dimitry Andric
7798640d82 Fine-tune llvm optimization for sys/boot/i386/boot2, which shaves off
some more bytes from the final boot2 image.

Submitted by:	rdivacky
2011-05-05 18:47:24 +00:00
Jack F Vogel
3cec53b8a7 Add an initialization to the error variable, without
this there is a rare return path that bogusly appears
to fail when it should not.  Also white space correction.

Thanks to Arnaud Lacombe for noticing the problem.
2011-05-05 17:28:45 +00:00
Alexander Motin
e2d6ccef4b Add PCI ID for Marvell 88SE9182 -- PCIe 2.x x2 relative of the 88SE912x.
Submitted by:	dchagin
MFC after:	1 week
2011-05-05 17:11:26 +00:00
Dimitry Andric
fba13887ca Make cross-compiling using clang work better, by respecting the
LLVM_HOSTTRIPLE that is defined during the cross-tools stage.

Using clang, you can now build amd64 world and kernel on i386, and vice
versa.  Other arches still need work.
2011-05-05 16:14:13 +00:00