the year bump.
# If we behaved like book publishers, we'd do this in July. I can't find
# a good reference for why they do it then, but it has been explained to
# me that copyrights in the last 1/2 of the year expire as if they were
# published in the following year. I can't confirm this info, but if you
# have a pointer, please send it to me.
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
security.mac.biba.interfaces_equal
If non-zero, all network interfaces be created with the label:
biba/equal(equal-equal)
This is useful where programs which initialize network interfaces
do not have any labeling support. This includes dhclient and ppp. A
long term solution is to add labeling support into dhclient(8)
and ppp(8), and remove this variable.
It should be noted that this behavior is different then setting the:
security.mac.biba.trust_all_interfaces
sysctl variable, as this will create interfaces with a biba/high label.
Lower integrity processes are not able to write to the interface in this
event. The security.mac.biba.interfaces_equal will override
trust_all_interfaces.
The security.mac.biba.interfaces_equal variable will be set to zero
or disabled by default.
MFC after: 2 weeks
USB HID device that allows to plug two PS2 controllers. This specific
device doesn't work yet but will as soon as we support devices with
multiple report IDs.
MFC after: 3 days
broken report descriptor. While I'm here, make all the other report
descriptors const to match the newly added one.
Obtained from: NetBSD
MFC after: 1 week
lack a report descriptor and don't use the standard interface class.
This patch works around these deficiencies so that the uhid(4) driver
can recognize and use those broken devices.
PR: usb/90141
Submitted by: Ed Schouten <ed@fxq.nl> (with minor mods from me)
MFC after: 1 week
force allocation of unallocated BARs (cardbus uses this to preallocate
everything). Add a prefetchmask to allow for busses that get prefetch
hints to set them. Addjust pci_add_map and pci_ata_maps to take a new
force flag which pci_add_resources will pass in. Implement 'force' in
pci_add_map. Write new value of allocated resource into the bar, if
the allocation succeeded (we should have done this before, but with
the new force the bug was very obvious).
- Provide tunable vm.memguard.desc, so one can specify memory type without
changing the code and recompiling the kernel.
- Allow to use memguard for kernel modules by providing sysctl
vm.memguard.desc, which can be changed to short description of memory
type before module is loaded.
- Move as much memguard code as possible to memguard.c.
- Add sysctl node vm.memguard. and move memguard-specific sysctl there.
- Add malloc_desc2type() function for finding memory type based on its
short description (ks_shortdesc field).
- Memory type can be changed (via vm.memguard.desc sysctl) only if it
doesn't exist (will be loaded later) or when no memory is allocated yet.
If there is allocated memory for the given memory type, return EBUSY.
- Implement two ways of memory types comparsion and make safer/slower the
default.
This should reduce huge playback / recording latency for
applications that try to act smarter and manage their own
buffering (XMMS, Skype, etc.).
Note to Skype + via8xxx users: Remove previous hackish
"hint.pcm.<unit>.via_dxs_disabled" from kernel hint and see
whether this changes cure all those annoying sound issues.
but broke handling of the turboG channel; since we aren't ready to revamp
the channel list just check for turboA channels for now so channel 6 is
considered in auto mode
Noticed by: gibbs
try very hard to be perfect. However, these attempts broke down when
there were large numbers of resources. We'd not be able to map them all.
Instead, accept that we might pass more range to thse subbus than
might be optimal be able to compute. However, there's little harm in
this and it allows us to pass greater resources through.
# it has been suggested that we allocate a fixed amount of resources
# on attach and give it out upon request. This might not be a bad idea...
The race is very real, but conditions needed for triggering it are rather
hard to meet now.
When gjournal will be committed (where it is quite easy to trigger) we need
to fix it.
For now, verify if it is really hard to trigger.
Discussed with: kan
of msleep(). msleep_spin() doesn't support changing the priority of the
thread while it is asleep nor does it support interruptible sleeps (PCATCH)
or the PDROP flag. It does support timeouts however. It differs from
msleep() in that the passed in mutex is a spin mutex. This means one can
use msleep_spin() and wakeup() with a spin mutex similar to msleep() and
wakeup() with a regular mutex. Note that the spin mutex in question needs
to come before sched_lock and the sleepq locks in lock order.
spin locks that are not in the static order list. It is not safe to call
printf while holding the witness spin mutex since the console drivers that
back printf may need to use their own spin locks which would try to talk
to witness when they were locked. Given this, it is possible for one
CPU to lock a console driver lock (such as sio) which then tries to lock
the witness lock while another CPU is doing the printf while holding the
witness lock. Fix this by moving the printf outside of the witness lock.
All other printf's in witness are already correct.
MFC after: 3 days
ETHERTYPE_IPV6 frames. Change this to be a sysctl knob so that is able to still
bridge non-IP packets if desired.
Also return early if all pfil_* sysctls are turned off, the user obviously does
not want to filter on the bridge.
cardbus_cis.c to this file, some code was not merged and thus resource
list entries were invalid. They didn't have a resources attached to
them.
However, the problem was masked for some time later, because newer
resources list entries were added to the head of the list, and
resource_list_find() always returned the first matching resource list
entry. Usually the underlying driver allocated a valid resource and
added it to the head of the list, and invalid one wasn't used.
In rev. 1.174 of subr_bus.c the sorting of resource list entries was
reversed demasking the problem in cardbus_alloc_resources().
This commit fixes the problem returning back some code from
cardbus_cis.c, pre-1.49 revisions.
PR: kern/87114
PR: kern/90441
Hardware provided by: Vasily Olekhov <olekhov yandex.ru>
Reviewed by: imp
. remove unnecessay header files after Scott's bus_dma(9) commit.
. remove global variable tis which was introduced at the time of
zero_copy(9) changes. The variable tis was not used at all. The
same applyes to ti_links in softc so axe it.
. deregister variables.
. axe ti_vhandle and switch to use explicit register access for
accessing NIC local memory. Creates three variants of ti_mem to
read/write NIC local memory(ti_mem_read, ti_mem_write) and clearing
NIC local memory(ti_mem_zero). This greatly enhances code
readability and have ti(4) drop using shared memory scheme for
Tigon 1. As Tigon 1 switched to use explicit register access for Tx,
axe ti_tx_ring_nic/ti_cmd_ring in softc.(Tigon 2 used to host ring
scheme which means there is no need to access NIC local memory via
register access for Tx and NIC would DMA the modified Tx rings into
its local memory.) [1]
. introduce new macro TI_EVENT_*/TI_CMD_* to handle NIC envent/command.
Instead of using bit fields assginment for accessing the event, use
shift operations to set/get it. [1]
. add additional check for valid DMA tags in ti_free_dmamaps().
. add missing bus_dmamap_sync/bus_dmamap_unload in ti_free_*_ring_*.
. fix locking nits(MTX_RECURSE mutex) and make ti(4) MPSAFE.
. change data type of ti_rdata_phys to bus_addr_t and don't blindly
cast to uint32_t.
. rearrange detach path and make ti(4) survive during device detach.
. for Tigon 1, use explicit register access for checking Tx descriptors
in ti_encap()/ti_txeof(). [1]
. properly call bus_dmamap_sync(9) for updating statistics.
. remove extra semicolon in ti_encap()
. rewrite loading MAC address to work on strict-alignment architectures.
. move TI_RD_OFF macro to if_tireg.h
. axe ETHER_ALIGN as it's already defined in <net/ethernet.h>.
. make macros immuine from expansion by adding parenthesis and do-while.
. remove alpha specific hack as vtophys(9) is no longer used in ti(4)
after Scott's bus_dma(9) fix.
Reviewed by: scottl
Obtained from: OpenBSD [1]
UMA_SLAB_MALLOC flag.
In some circumstances (I observed it when I was doing a lot of reallocs)
UMA_SLAB_MALLOC can be set even if us_keg != NULL.
If this is the case we have wonderful, silent data corruption, because less
data is copied to the newly allocated region than should be.
I'm not sure when this bug was introduced, it could be there undetected
for years now, as we don't have a lot of realloc(9) consumers and it was
hard to reproduce it...
...but what I know for sure, is that I don't want to know who introduce
the bug:) It took me two/three days to track it down (of course most of
the time I was looking for the bug in my own code).
amd64_set_watch() as 'unsigned int' and 'unsigned int' is 32bit long on amd64.
Even with that fix hardware watchpoint don't work for me on amd64, ie. when
I set the watchpoint and write a byte there, nothing happens.
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
"established" state.
Similar to OpenBSD's rev. 1.499 by joel but not breaking ABI.
Obtained from: OpenBSD (with changes)
Reported by: Bruno Afonso
MFC after: 3 days
X-MFC: together with local_flags
POSIX. This also makes the struct correct we ever implement an i386-time64
architecture. Not that we need too.
Reviewed by: imp, brooks
Approved by: njl (acpica), des (no objects, touches procfs)
Tested with: make universe
Specifically, it is required for the I/O that may be performed by
elfN_load_section().
Avoid an obscure deadlock in the a.out, elf, and gzip image
activators. Add a comment describing why the deadlock does not occur
in the common case and how it might occur in less usual circumstances.
Eliminate an unused variable from exec_aout_imgact().
In collaboration with: tegge
by debugger, e.g process is dumping core. Only access p_xthread if
P_STOPPED_TRACE is set, this means thread is ready to exchange signal
with debugger, print a warning if P_STOPPED_TRACE is not set due to
some bugs in other code, if there is.
The patch has been tested by Anish Mistry mistry.7 at osu dot edu, and
is slightly adjusted.
I'm holding off on building on sparc64 and others because I don't know
if this driver has had all the inb/outb removed (I think it has). Nor
do I know if there are byte ordering issues. There are very few word
operations on an NE2000, but I've not had time to audit them all.
Suggested by: Daniel O'Connor
handling code so the stack trace unwinders don't start trying to
go into user-space.
Found by trying to create core dumps with a KTR_COMPILE/KTR_GEOM
kernel, which results in a stack_save() call in the ast() coredump
path - this created a panic, and then calling 'trace' in ddb resulted
in the black screen of death after printing out most of the backtrace.
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly. In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures. Basically,
all the archs were taking a trapframe and converting it into a clockframe
one way or another. Now they can just extract the PC and usermode values
directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
timecounter, call hardclock() directly. This removes an extra
conditional check from every clock interrupt on Alpha on the BSP.
There is probably room for even further pruning here by changing Alpha
to use the simplified timecounter we use on x86 with the lapic timer
since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
is false, so add a KASSERT() to that affect and remove a condition
to slightly optimize the non-lapic case.
- Change prototypeof arm_handler_execute() so that it's first arg is a
trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.
Tested on: alpha, amd64, arm, i386, ia64, sparc64
Reviewed by: bde (mostly)
if we need a valid MAC address (for probing the media for example) before
ether_ifattach() has been called since IF_LLADDR() is NULL then.
Tested by: tisco
except for BGE_CHIPID_BCM5700_B0, which is buggy.
- All bge(4) supported hardware, has a bug that produces incorrect checksums
on Ethernet runts. However, in case of a transmitted packet, the latter can
be padded with zeroes, and the checksum would be correct. (Probably chip
includes the pad data into checksum). In case of receive, we just don't
trust checksum data in received runts.
Obtained from: NetBSD (jonathan) via Mihail Balikov
Previously it always returned 0 which means success regardless of
EEPROM status.
While here, add a check whether EEPROM read is successful.
Submitted by: jkim
- removed unused funtion bge_handle_events().
- removed bus_dmamap_destroy(9) calls for DMA maps created by
bus_dmamem_alloc(9). This should fix panics seen on sparc64
in device detach.
- added check for parent DMA tag creation.
- switched to use __NO_STRICT_ALIGNMENT as bge(4) supports all
architectures.
- added missing bus_dmamap_sync(9) in bge_txeof().
- added missing bus_dmamap_sync(9) in bge_encap().
- corrected memory synchronization operation on status block.
As the driver just read status block that was DMAed by NIC it
should use BUS_DMASYNC_POSTREAD. Likewise the driver does not
need to write status block back, so remove unnecessary
bus_dmamap_sync(9) calls in bge_intr().
- corrected memory synchronization operation on RX return ring.
The driver only read the block so remove unnecessary
bus_dmamap_sync(9) in bge_rxeof().
- force bus_dmamap_sync(9) for only modified descriptors. Blindly
synching all desciptor rings would reduce performance.
- call bus_dmamap_sync(9) for DMA maps that were modified in bge_rxeof().
Reviewed by: jkim(initial version)
Tested by: glebius(i386), jkim(amd64 initial version)
interfaces to bridges, which will then send and receive IP protocol 97 packets.
Packets are Ethernet frames with an EtherIP header prepended.
Obtained from: NetBSD
MFC after: 2 weeks
it and reacquiring it in vrele(). Consequently, there is no reason to
increase the reference count on the vm object caching the file's pages.
Reviewed by: tegge
Eliminate unused parameters to elfN_load_file().
3MB of physical memory for heap instead of range between 1MB and 4MB.
This makes this feature working with PAE and amd64 kernels, which are
loaded at 2MB. Teach i386_copyin() to avoid using range allocated by
heap in such case, so that it won't trash heap in the low memory
conditions.
This should make loading bzip2-compressed kernels/modules/mfs images
generally useable, so that re@ team is welcome to evaluate merits
of using this feature in the installation CDs.
Valuable suggestions by: jhb
the addition of pci_find_extcap().
- Change the drm drivers to attach to vgapci. This is #ifdef'd so the
code can be shared across branches.
- Use pci_find_extcap() to look for AGP and PCIE capabilities in drm.
- GC all the drmsub stuff for i810/i830/i915. The agp and drm devices are
now both children of vgapci.
as a bus so that other drivers such as drm(4), acpi_video(4), and agp(4)
can attach to it thus allowing multiple drivers for the same device. It
also removes the need for the drmsub hack for the i8[13]0/i915 drm and agp
drivers.
as a bus so that other drivers such as drm(4), acpi_video(4), and agp(4)
can attach to it thus allowing multiple drivers for the same device. It
also removes the need for the drmsub hack for the i8[13]0/i915 drm and agp
drivers.
attach to the hostb driver instead. This means that agp can now be loaded
at runtime (in theory at least). Also, the drivers no longer have to
explicity call device_verbose() to cancel out any earlier calls to
device_quiet() by the hostb(4) driver (this shows a limitation in new-bus,
drivers really shouldn't be doing device_quiet() until they know they are
going to drive that device, i.e. in attach).
duplicated anyways) and into a single MI driver. Extend the driver a bit
to implement the bus and PCI kobj interfaces such that other drivers can
attach to it and transparently act as if their parent device is the PCI
bus (for the most part).
ELF trampoline build its own target, "trampoline".
It makes it possible to construct a bootable gzipped kernel without having
to build in the same process.
drivers already map sections into KVA as needed anyway. Note that this
will probably break the nvidia driver, but I will coordinate to get that
fixed.
MFC after: 2 weeks
to search for a specific extended capability. If the specified capability
is found for the given device, then the function returns success and
optionally returns the offset of that capability. If the capability is
not found, the function returns an error.
The purpose of this change is consistency (not performance improvement:)),
as it was hard to tell if fdrop() is MPSAFE or not when I saw it sometimes
under the Giant and sometimes without it.
Glanced at by: ssouhlal, kan
special handling when zero. This caused no PFSYNC_ACT_DEL message and thus
disfunction of pfflowd and state synchronisation in general.
Discovered by: thompsa
Good catch by: thompsa
MFC after: 7 days
provide enough room for decompression (up to 2.5MB is necessary). This
should be safe to do since we load i386 kernels after 8MB mark now, so
that 16MB is the minimum amount of RAM necessary to even boot FreeBSD.
This makes bzip2-support practically useable.
memory directly available to loader(8) and friends was limited to 640K on i386.
Those times have passed long time ago and now loader(8) can directly access
up to 4GB of RAM at least theoretically. At the same time, there are several
places where it's assumed that malloc() will only allocate memory within
first megabyte.
Remove that assumption by allocating appropriate bounce buffers for BIOS
calls on stack where necessary.
This allows using memory above first megabyte for heap if necessary.
1. The ELF-64 typedefs are now standardized, so that the libelf port
(devel/libelf) does not need to compensate for not having the
Elf64_Xword and Elf64_Sxword types.
2. ELF Symbol versioning support has been added. This also affects
the libelf port (though configure should detect this correctly).
we can cache its value in the softc. Eliminates one PCI register
write per call to bge_start().
A 1.8% speedup for UDP_RR test on my old box.
Obtained from: NetBSD(jonathan) via delphij
to be compatible with symbol versioning support as implemented by
GNU libc and documented by http://people.redhat.com/~drepper/symbol-versioning
and LSB 3.0.
Implement dlvsym() function to allow lookups for a specific version of
a given symbol.
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
incorrectly in almost all drivers. Indicate failure with
mbuf value of NULL.
In collaboration with: yongari, ru, sam
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
o Remove the unused and non-standard SHT_NUM, PT_COUNT and DT_COUNT.
o Add the STV_DEFAULT, STV_INTERNAL, STV_HIDDEN and STV_PROTECTED
symbol visibility constants.
o Add the ELF32_ST_VISIBILITY and ELF64_ST_VISIBILITY macros to
get the symbol visibility from the st_other field.
o Add the ELFOSABI_AIX, ELFOSABI_OPENVMS and ELFOSABI_NSK constants.
o Add the ET_LOOS, ET_HIOS, ET_LOPROC and ET_HIPROC constants.
o Further flesh out the list of machine types. Note that EM_ALPHA
remains non-standard. The standard value for EM_ALPHA is given
by EM_ALPHA_STD (which is a non-standard name :-)
o Add the SHN_LOOS, SHN_HIOS and SHN_XINDEX constants.
o Add the SHT_INIT_ARRAY, SHT_FINI_ARRAY, SHT_PREINIT_ARRAY, SHT_GROUP
and SHT_SYMTAB_SHNDX constants.
o Add the SHF_MERGE, SHF_STRINGS, SHF_INFO_LINK, SHF_LINK_ORDER,
SHF_OS_NONCONFORMING, SHF_GROUP and SHF_MASKOS constants.
o Add the PF_MASKOS and PF_MASKPROC constants.
o Add the STB_LOOS andf STB_HIOS constants.
o Add the STT_COMMON, STT_LOOS and STT_HIOS constants.
MFC after: 1 week
32-bit entity. Also, don't cast the resulting symbol type value to
a datatype smaller than the st_info field type as a quick way to
mask off the upper bits as it may cause inconsistent behaviour when
the macro is used (without explicit casting) on varargs functions.
MFC after: 1 week
span ports when they disappear. The span port does not have a pointer to the
softc so revert r1.31 and bring back the softc linked-list.
MFC after: 2 weeks
and KTR_IO as they were never used. Remove KTR_CLK since it was only
used for hardclock firing and use KTR_INTR there instead. Remove
KTR_CRITICAL since it was only used for crit enter/exit and use
KTR_CONTENTION instead.
AMD-8111 SMBus 2.0 controller) are all SMBus 2.0 controllers,
and need another implementation of SMBus access methods, while
this driver supports AMD-756 SMBus 1.0 controller and clones,
including AMD-8111 SMBus 1.0 controller.
Tested by: Vladimir Timofeev (0x006410de),
mezz (0x008410de),
ru (0x00d410de)
All of us got the same(!) nonsense when running ``mbmon -S'',
repeated every four rows.
really should be a fptrdiff_t if we had that) in profclock().
- Don't try to profile kernel pc's that are >= the kernel lowpc to avoid
underflows when computing a profiling index.
- Use the PC_TO_I() macro to compute the kernel profiling index rather than
doing it inline.
Discussed with: bde
ephemeral mappings that are used as the source for three copy
operations from kernel space to user space. There are two reasons for
making this change: (1) Under heavy load exec_map can fill up causing
vm_map_find() to fail. When it fails, the nascent process is aborted
(SIGABRT). Whereas, this reimplementation using sf_buf_alloc()
sleeps. (2) Although it is possible to sleep on vm_map_find()'s
failure until address space becomes available (see kmem_alloc_wait()),
using sf_buf_alloc() is faster. Furthermore, the reimplementation
uses a CPU private mapping, avoiding a TLB shootdown on
multiprocessors.
Problem uncovered by: kris@
Reviewed by: tegge@
MFC after: 3 weeks
SMBus 1.0 and not SMBus 2.0.
AMD-8111 hub (datasheet is publically available) implements both SMBus
2.0 (a separate PCI device) and SMBus 1.0 (a subfunction of the System
Management Controller device with the base I/O address is accessible
through the CSR 0x58). This driver only supports AMD-756 SMBus 1.0
compatible devices.
With the patched sysutils/xmbmon port (to also fix PCI ID and to enable
smb(4) support), I now get:
pciconf:
none0@pci0:7:2: class=0x0c0500 card=0x746a1022 chip=0x746a1022 rev=0x02 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-8111 SMBus 2.0 Controller'
class = serial bus
subclass = SMBus
amdpm0@pci0:7:3: class=0x068000 card=0x746b1022 chip=0x746b1022 rev=0x05 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'AMD-8111 ACPI System Management Controller'
class = bridge
dmesg:
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0x10e0-0x10ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0
# mbmon -A -d
Summary of Detection:
* SMB monitor(s)[ioctl:AMD8111]:
** Winbond Chip W83627HF/THF/THF-A found at slave address: 0x50.
** Analog Dev. Chip ADM1027 found at slave address: 0x5C.
* ISA monitor(s):
** Winbond Chip W83627HF/THF/THF-A found.
I think the confusion comes from the fact that nobody really tried
SMBus with xmbmon :-), since sysutils/xmbmon port doesn't come with
SMBus support enabled, neither in FreeBSD 4, nor in later versions,
so mbmon(1) was just showing the values from the Winbond sensors
accessible through the ISA I/O method (mbmon -I), for me anyway.
On my test machine, the amdpm(4) didn't even attach due to I/O port
allocation failure (who knows what the hell it read from CSR 0x58
of the SMBus 2.0 device :-), which isn't in the CSR space).
I've also checked that lm_sensors.org uses correct PCI ID for SMBus
1.0 of AMD-8111:
i2c-amd756.c: {PCI_VENDOR_ID_AMD, 0x746B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111 },
This driver is analogous to our amdpm.c which supports SMBus 1.0
AMD-756 and compatible devices, including SMBus 1.0 on AMD-8111.
i2c-amd8111.c: { 0x1022, 0x746a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
This driver is analogous to nForce-2/3/4, i2c-nforce2.c, which
supports SMBus 2.0, and which our amdpm.c does NOT support
(SMBus 2.0 uses a different, ACPI-unified, API to talk to SMBus).
At least I know for sure it doesn't work with my nForce3. :-)
(The xmbmon port will be fixed to correct the PCI ID too and to
enable the smb(4) support.)
command. This fixes some weird booting issues on newer versions
of the firmware on the MSA20.
Reported by: Philippe Pegon <Philippe dot Pegon at crc dot u-strasbg dot fr>
which existed to cleanup the linux_osname mutex. Now that MTX_SYSINIT()
has grown a SYSUNINIT to destroy mutexes on unload, the extra destroy here
was redundant and resulted in panics in debug kernels.
MFC after: 1 week
Reported by: Goran Gajic ggajic at afrodita dot rcub dot bg dot ac dot yu
- Give up endianess support and switch to native-endian format for
accessing hardware structures. In fact embedded processor for
BCM57xx is big-endian architure(MIPS) and it requires native-endian
format for NIC structures.The NIC performs necessary byte/word
swapping depending on programmed endian type.
- With above changes all htole16/htole32 calls were gone.
- Remove bge_vhandle member in softc and changed to use explicit
register access. This may add additional performance penalty
that than that of previous memory access. But most of the access
is performed on initialization phase(e.g. RCB setup), it would be
negligible.
Due to incorrect use of bus_dma(9) in bge(4) it still panics sparc64
system in device detach path. The issue would be fixed in next patch.
Reviewed by: jkim (initial version)
Silence from: ps
Tested by: glebius
Obtained from: NetBSD via OpenBSD
mbuf chain that starts with a cluster containing just MHLEN bytes. This
happened because m_dup called m_get or m_getcl depending on the amount of
data to copy, but then always set the size available in the first mbuf to
MHLEN.
Submitted by: Matt Koivisto <mkoivisto at sandvine dot com>
Approved by: jmg
Silence from: rwatson (mentor)
SMBus busses. Because of limitations in smbus_if.m, the second smbus is
attached to an amdpm1 device that is a child of amdpm0.
Submitted by: Artemiev Igor ai (at) bmc dot brk dot ru
1. Implement a large set of ioctl shims so that the Linux management apps
from LSI will work. This includes infrastructure to support adding, deleting
and rescanning arrays at runtime. This is based on work from Doug Ambrosko,
heavily augmented by LSI and Yahoo.
2. Implement full 64-bit DMA support. Systems with more than 4GB of RAM
can now operate without the cost of bounce buffers. Cards that cannot do
64-bit DMA will automatically revert to using bounce buffers. This option
can be forced off by setting the 'hw.amr.force_sg32" tunable in the loader.
It should only be turned off for debugging purposes. This work was sponsored
by Yahoo.
3. Streamline the command delivery and interrupt handler paths after
much discussion with Dell and LSI. The logic now closely matches the
intended design, making it both more robust and much faster. Certain
i/o failures under heavy load should be fixed with this.
4. Optimize the locking. In the interrupt handler, the card can be checked
for completed commands without any locks held, due to the handler being
implicitely serialized and there being no need to look at any shared data.
Only grab the lock to return the command structure to the free pool. A
small optimization can still be made to collect all of the completions
together and then free them together under a single lock.
Items 3 and 4 significantly increase the performance of the driver. On an
LSI 320-2X card, transactions per second went from 13,000 to 31,000 in my
testing with these changes. However, these changes are still fairly
experimental and shouldn't be merged to 6.x until there is more testing.
Thanks to Doug Ambrosko, LSI, Dell, and Yahoo for contributing towards
this.
to use busdma. Unlike most of the other drivers, but similar to the
if_em driver, pre-allocate the dmamaps at init time instead of allocating
them on the fly when descriptors need to be filled. This isn't ideal right
now because a map is allocated for every descriptor slot in the tx, rx, mini,
and jumbo rings (which is a lot!) in order to simplify the bookkeeping, even
though the driver might support filling only a subset of those slots.
Luckily, maps are typically NULL on i386 and amd64, so the cost isn't
very high. It could be an issue with sparc64, but the driver isn't endian
clean either, and that is a much bigger problem to solve first.
Note that jumbo frame support is under-tested, and I'm not even sure if
it till really works correctly given the evil VM magic that is does.
The changes here attempt to preserve the existing semanitcs.
Thanks to Martin Nillson for contributing the Netgear card for this work.
MFC-After: 3 weeks
class, then it displays various information about the lock and calls a
new function pointer in lock_class (lc_ddb_show) to dump class-specific
information about the lock as well (such as the owner of a mutex or
xlock'ed sx lock). This is easier than staring at hex dumps of locks to
figure out who owns the lock, etc. Note that extending lock_class doesn't
affect the ABI for any kernel modules as the only code that deals with
lock_class structures directly is kern_mutex.c, kern_sx.c, and witness.
MFC after: 1 week
originally thought. The BIOS that cleared CPUID_APIC actually managed
to disable the local APIC entirely and even Windows 64 doesn't boot on
it.
Reported by: bz
they are passed by reference. Handle the difference within the
linux_ioctl_termio on the LINUX_TCFLSH path.
Submitted by: Jaroslav Drzik <jaro_AT_coop-voz_dot_sk>
if the boot CPU has a local APIC because some BIOS vendors are not
competent enough to set this bit. Instead, just assume that we always have
a local APIC on amd64. For i386 the check is a bit more subtle. FreeBSD
requires either an MP Table or an ACPI MADT table to enumerate APICs. The
only systems that have one of those tables that don't have local APICs are
some presumably rare (and old) SMP 486 systems using external APICs. Thus,
instead of checking the CPUID_APIC flag, check the CPU class and abort if
we are running on a 486.
MFC after: 1 week
Reported by: bz
action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
