o use atomic operations to fiddle with stopped_cpus and started_cpus.
o disable interrupts while we're waiting to be started.
o remove logic relating to cpustop_restartfunc as it's not used.
PCB in which the context of stopped CPUs is stored. To access this
PCB from KDB, we introduce a new define, called KDB_STOPPEDPCB. The
definition, when present, lives in <machine/kdb.h> and abstracts
where MD code saves the context. Define KDB_STOPPEDPCB on i386,
amd64, alpha and sparc64 in accordance to previous code.
with large mmap files mapped into many processes, this saves hundreds of
megabytes of ram.
pv entries were individually allocated and had two tailq entries and two
pointers (or addresses). Each pv entry was linked to a vm_page_t and
a process's address space (pmap). It had the virtual address and a
pointer to the pmap.
This change replaces the individual allocation with a per-process
allocation system. A page ("pv chunk") is allocated and this provides
168 pv entries for that process. We can now eliminate one of the 16 byte
tailq entries because we can simply iterate through the pv chunks to find
all the pv entries for a process. We can eliminate one of the 8 byte
pointers because the location of the pv entry implies the containing
pv chunk, which has the pointer. After overheads from the pv chunk
bitmap and tailq linkage, this works out that each pv entry has an
effective size of 24.38 bytes.
Future work still required, and other problems:
* when running low on pv entries or system ram, we may need to defrag
the chunk pages and free any spares. The stats (vm.pmap.*) show that
this doesn't seem to be that much of a problem, but it can be done if
needed.
* running low on pv entries is now a much bigger problem. The old
get_pv_entry() routine just needed to reclaim one other pv entry.
Now, since they are per-process, we can only use pv entries that are
assigned to our current process, or by stealing an entire page worth
from another process. Under normal circumstances, the pmap_collect()
code should be able to dislodge some pv entries from the current
process. But if needed, it can still reclaim entire pv chunk pages
from other processes.
* This should port to i386 really easily, except there it would reduce
pv entries from 24 bytes to about 12 bytes.
(I have integrated Alan's recent changes.)
- Use FBSDID in trap.c
- Make the global trap_sig[] static as it's not used outside of trap.c.
- In sendsig() remove an unused variable.
- In trap() sync with the other archs; for fast data access MMU miss and
data access protection traps set ksi_addr to the SFAR reg which contains
the faulting address and otherwise to the TPC reg. Generally the TCP reg
contains the address of the instruction that caused the exception, except
for fast instruction access traps (and some others; more refinement may
be needed here) it also contains the faulting address.
Previously sendsig() always set si_addr to the SFAR reg which is wrong
for most traps.
- In sendsig() add support for FreeBSD old-style signals.
These changes are inspired by kmacy's sun4v changes and allow libsigsegv
to build on FreeBSD/sparc64, but it doesn't pass all checks and tests it
actually should, yet.
MFC after: 5 days
intr_disable() and intr_restore() resp. Previously, critical
regions would have interrupts disabled, but that was changed.
Consequently, the debugger could run with interrupts enabled.
This could cause problems for the low-level console code where
received characters would trigger an interrupt that causes
the interrupt handler to read the character instead of the
cngetc() function.
The INP_DROPPED check replaces the current NULL checks; the INP_TIMEWAIT
checks appear to have always been required, but not been there, which
is/was a bug. This avoids unconditionally casting of in_ppcb to a tcpcb,
when it may be a twtcb, which may have resulted in obscure ICMP-related
panics in earlier releases.
MFC after: 3 months
casts.
Consistently use intotw() to cast inp_ppcb pointers to struct tcptw *
pointers.
Consistently use intotcpcb() to cast inp_ppcb pointers to struct tcpcb *
pointers.
Don't assign tp to the results to intotcpcb() during variable declation
at the top of functions, as that is before the asserts relating to
locking have been performed. Do this later in the function after
appropriate assertions have run to allow that operation to be conisdered
safe.
MFC after: 3 months
immediately rather than jumping to the normal output handling, which
assumes we've pulled out the inpcb, which hasn't happened at this
point (and isn't necessary).
Return ECONNABORTED instead of EINVAL when the inpcb has entered
INP_TIMEWAIT or INP_DROPPED, as this is the documented error value.
This may correct the panic seen by Ganbold.
MFC after: 1 month
Reported by: Ganbold <ganbold at micom dot mng dot net>
the NS8250 class driver. The UART has FIFOs if sc_rxfifosz>1, so
test for that instead.
While here properly initialize sc_rxfifosz and sc_txfifosz in the
case the UART doesn't have FIFOs.
disconnect for fully connected sockets was dropped, meaning that if
the socket was closed while the connection was alive, it would be
leaked. Structure tcp_usr_detach() so that there are two clear
parts: initiating disconnect, and reclaiming state, and reintroduce
the tcp_disconnect() call in the first part.
MFC after: 3 months
a pv entry if the number of entries is below the high water mark for pv
entries.
Use pmap_try_insert_pv_entry() in pmap_copy() instead of
pmap_insert_entry(). This avoids possible recursion on a pmap lock in
get_pv_entry().
Eliminate the explicit low-memory checks in pmap_copy(). The check that
the number of pv entries was below the high water mark was largely
ineffective because it was located in the outer loop rather than the
inner loop where pv entries were allocated. Instead of checking, we
attempt the allocation and handle the failure.
Reviewed by: tegge
Reported by: kris
MFC after: 5 days
The following bug was just identified in OpenBSD and it looks like the same
bug exists in the other BSDen NFS servers.
A Linux client (don't know which version, but you can look at
http://bugzilla.kernel.org/show_bug.cgi?id=6256)
does a Setattr of mtime to the server's time, where the file is mode 0664 and
the client user has group access (ie. caller is not the file owner).
The BSD servers fail the Setattr with EPERM, since the VA_UTIMES_NULL flag
isn't set before doing the VOP_SETATTR.
It seems to me that this should be allowed, since it is allowed for a local
utimes(2). If so, the fix is to set VA_UTIMES_NULL for the
"set-time-to-server-time" cases of setting atime and/or mtime.
Submitted by: rick@snowhite.cis.uoguelph.ca
Reviewed by: cel
Approved by: silby
MFC after: 1 week
socket can have a tcp connection that has entered time wait
attached to it, in the event that shutdown() is called on the
socket and the FINs properly exchange before close(). In this
case we don't detach or free the inpcb, just leave the tcptw
detached and freed, but we must release the inpcb lock (which we
didn't previously).
MFC after: 3 months
pru_abort(), pru_detach(), and in_pcbdetach():
- Universally support and enforce the invariant that so_pcb is
never NULL, converting dozens of unnecessary NULL checks into
assertions, and eliminating dozens of unnecessary error handling
cases in protocol code.
- In some cases, eliminate unnecessary pcbinfo locking, as it is no
longer required to ensure so_pcb != NULL. For example, the receive
code no longer requires the pcbinfo lock, and the send code only
requires it if building a new connection on an otherwise unconnected
socket triggered via sendto() with an address. This should
significnatly reduce tcbinfo lock contention in the receive and send
cases.
- In order to support the invariant that so_pcb != NULL, it is now
necessary for the TCP code to not discard the tcpcb any time a
connection is dropped, but instead leave the tcpcb until the socket
is shutdown. This case is handled by setting INP_DROPPED, to
substitute for using a NULL so_pcb to indicate that the connection
has been dropped. This requires the inpcb lock, but not the pcbinfo
lock.
- Unlike all other protocols in the tree, TCP may need to retain access
to the socket after the file descriptor has been closed. Set
SS_PROTOREF in tcp_detach() in order to prevent the socket from being
freed, and add a flag, INP_SOCKREF, so that the TCP code knows whether
or not it needs to free the socket when the connection finally does
close. The typical case where this occurs is if close() is called on
a TCP socket before all sent data in the send socket buffer has been
transmitted or acknowledged. If INP_SOCKREF is found when the
connection is dropped, we release the inpcb, tcpcb, and socket instead
of flagging INP_DROPPED.
- Abort and detach protocol switch methods no longer return failures,
nor attempt to free sockets, as the socket layer does this.
- Annotate the existence of a long-standing race in the TCP timer code,
in which timers are stopped but not drained when the socket is freed,
as waiting for drain may lead to deadlocks, or have to occur in a
context where waiting is not permitted. This race has been handled
by testing to see if the tcpcb pointer in the inpcb is NULL (and vice
versa), which is not normally permitted, but may be true of a inpcb
and tcpcb have been freed. Add a counter to test how often this race
has actually occurred, and a large comment for each instance where
we compare potentially freed memory with NULL. This will have to be
fixed in the near future, but requires is to further address how to
handle the timer shutdown shutdown issue.
- Several TCP calls no longer potentially free the passed inpcb/tcpcb,
so no longer need to return a pointer to indicate whether the argument
passed in is still valid.
- Un-macroize debugging and locking setup for various protocol switch
methods for TCP, as it lead to more obscurity, and as locking becomes
more customized to the methods, offers less benefit.
- Assert copyright on tcp_usrreq.c due to significant modifications that
have been made as part of this work.
These changes significantly modify the memory management and connection
logic of our TCP implementation, and are (as such) High Risk Changes,
and likely to contain serious bugs. Please report problems to the
current@ mailing list ASAP, ideally with simple test cases, and
optionally, packet traces.
MFC after: 3 months
pru_abort(), pru_detach(), and in_pcbdetach():
- Universally support and enforce the invariant that so_pcb is
never NULL, converting dozens of unnecessary NULL checks into
assertions, and eliminating dozens of unnecessary error handling
cases in protocol code.
- In some cases, eliminate unnecessary pcbinfo locking, as it is no
longer required to ensure so_pcb != NULL. For example, in protocol
shutdown methods, and in raw IP send.
- Abort and detach protocol switch methods no longer return failures,
nor attempt to free sockets, as the socket layer does this.
- Invoke in_pcbfree() after in_pcbdetach() in order to free the
detached in_pcb structure for a socket.
MFC after: 3 months
- in_pcbdetach(), which removes the link between an inpcb and its
socket.
- in_pcbfree(), which frees a detached pcb.
Unlike the previous in_pcbdetach(), neither of these functions will
attempt to conditionally free the socket, as they are responsible only
for managing in_pcb memory. Mirror these changes into in6_pcbdetach()
by breaking it into in6_pcbdetach() and in6_pcbfree().
While here, eliminate undesired checks for NULL inpcb pointers in
sockets, as we will now have as an invariant that sockets will always
have valid so_pcb pointers.
MFC after: 3 months
the so_pcb pointer on the socket is always non-NULL. This eliminates
countless unnecessary error checks, replacing them with assertions.
MFC after: 3 months
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.
soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.
Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.
In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.
netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.
MFC after: 3 months
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.
This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.
MFC after: 3 months
the file descriptor reference, rather than paying additional lock
operations to acquire a socket reference from the file descriptor.
This will also help to ensure that file descriptor based socket
requests are not delivered to a socket after close. Most consumers
have already been converted to this model.
MFC after: 3 months
be present at this point. We will eventually remove this assert because
the socket layer should never look at so_pcb, but for now it's a useful
debugging tool.
MFC after: 3 months
socket calls relating to the creation and destruction of sockets. This
will eventually form the foundation of socket(9), but is currently in too
much flux to do so.
MFC after: 3 months
There's something strange going on with async events. They seem
to be be treated differently for different Fusion implementations.
Some will really tell you when it's okay to free the request that
started them. Some won't. Very disconcerting.
This is particularily bad when the chip (FC in this case) tells you
in the reply that it's not a continuation reply, which means you
can free the request that its associated with. However, if you do
that, I've found that additional async event replies come back for
that message context after you freed it. Very Bad Things Happen.
Put in a reply register debounce. Warn about out of range context
indices. Use more MPILIB defines where possible. Replace bzero with
memset. Add tons more KASSERTS. Do a *lot* more request free list
auditting and serial number usages. Get rid of the warning about
the short IOC Facts Reply. Go back to 16 bits of context index.
Do a lot more target state auditting as well. Make a tag out
of not only the ioindex but the request index as well and worry
less about keeping a full serial number.
a different register shift and is fed by a different clock than
we use for UltraSPARC hardware. To deal with this, the regshft and
rclk fields in the class structure are removed and bus frontends
now pass the right regshft and rclk to the probe function where
they're put in the BAS and passed in to subordinate drivers.
vnode after vflush() has succeeded. This would cause a dangling vnode
panic at unmount time otherwise. Other filesystems may have this problem
via their VFS_VGET() routines.
Found by: kris
Sponsored by: Isilon Systems, Inc.
--------------------
- Seal the fate of long standing memory leak (4 years, 7 months) during
pcm_unregister(). While destroying cdevs, scan / detect possible
children and free its SLIST placeholder properly.
- Optimize channel allocation / numbering even further. Do brute cyclic
checking only if the channel numbering screwed.
- Mega vchan create/destroy cleanup:
o Implement pcm_setvchans() so everybody can use it freely instead
of implementing their own, be it through sysctl or channel auto
allocation.
o Increase vchan creation/destruction resiliency:
+ it's possible to increase/decrease total vchans even during
busy playback/recording. Busy channel will be left alone, untouched.
Abusive test sample:
# play whatever...
#
while : ; do
sysctl hw.snd.pcm0.vchans=1
sysctl hw.snd.pcm0.vchans=10
sysctl hw.snd.pcm0.vchans=100
sysctl hw.snd.pcm0.vchans=200
done
# Play something else, leave above loop running frantically.
+ Seal another 4 years old bug where it is possible to destroy (virtual)
channel even when its cdevs being referenced by other process.
The "First Come First Served" nature of dsp_clone() is the main
culprit of this issue, and usually manifest itself as dangling
channel <-> process association. Ensure that all of its cdevs
are free from being referenced before destroying it (through
ORPHAN_CDEVT() macross).
All these fixes (including previous fixes) will be MFCed, later.
to avoid possible device unregister race (impossible to reproduce, yet
possible).
- Extra sanity check to ensure proper parent channel is being selected.
- Reset parent channel once all of its children gone.
called.
- vfs_getvfs has to return a reference to prevent the returned mountpoint
from changing identities.
- Release references acquired via vfs_getvfs.
Discussed with: tegge
Tested by: kris
Sponsored by: Isilon Systems, Inc.
mount memory from being reclaimed. This resolves a number of race
conditions described in vfs_default.c and introduced with the
VFS_LOCK_GIANT macros.
- Let the mtx and lock remain valid after the mount structure has been
freed by using init and fini calls. Technically fini will never be
called but is included for completeness.
- Consistently use lockmgr directly rather than lockmgr to lock and
vfs_unbusy to unlock.
Discussed with: tegge
Tested by: kris
Sponsored by: Isilon Systems, Inc.
- Move the vn_lock of the dvp until after we've unbusied the filesystem
to avoid a LOR with the mount point lock.
- In the v_mountedhere while loop we acquire a new instance of giant each
time through without releasing the first. This would cause us to leak
Giant.
Sponsored by: Isilon Systems, Inc.
requires Giant. It is set in bgetvp and cleared in brelvp.
- Create QUEUE_DIRTY_GIANT for dirty buffers that require giant.
- In the buf daemon, only grab giant when processing QUEUE_DIRTY_GIANT and
only if we think there are buffers in that queue.
Sponsored by: Isilon Systems, Inc.
failing, print a message when we fail for some reason as most callers do
not check the return value (e.g. 'cuz they're called from SYSINIT)
Reviewed by: scottl
MFC after: 1 week
Vararg functions have a different calling convention than regular
functions on amd64. Casting a varag function to a regular one to
match the function pointer declaration will hide the varargs from
the caller and we will end up with an incorrectly setup stack.
Entirely remove the varargs from these functions and change the
functions to match the declaration of the function pointers.
Remove the now unnecessary casts.
Also change static struct ipprotosw[] to two independent
protosw/ip6protosw definitions to remove an unnecessary cast.
PR: amd64/95008
Submitted and tested by: Mats Palmgren
Reviewed by: rwatson
MFC after: 3 days
o Add the scc(4) manpage to the build.
o Update the uart(4) manpage to account for scc(4).
o Update the uart(4) module build to include support for scc(4).
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
case panic on sparc64.
The problem is in MD5(9) implementation. The Encode() function takes
'unsigned char *output' as its first argument, which is then assigned to
'u_int32_t *op'. If the 'output' argument is not 4 byte aligned (and in
geli(8) case it is not), sparc64 machine will panic.
I don't know how to fix MD5(9) in a clean way, so I'm implementing a
work-around in geli(8).
Reported by: brueffer
MFC after: 3 days
in the ISR doesn't read the actual socket event register, but instead
reads garbage (usually 0xffffffff, but other times other things).
This totally violates the PCI spec, but happens rarely enough that a
workaround is in order. This adds one test when we have a real
interrupt to service (which is very rare), and doesn't affect the
usualy 'nothing to see here' case at all.
Problem reported by many, but sam@ gave me this workaround after
diagnosing the problem.
a lock's priority to a sleeping thread. When we panic, dump a stack
trace of the thread that is asleep if DDB is compiled into the kernel
just before calling panic(). This is much more informative and useful
for debugging than the current behavior of getting a page fault and not
having an easy way of determining which thread caused the original problem.
MFC after: 1 week
a race where data could come in before we clear the INFLUX flag, and get
skipped over by knote (and hence never be activated, though it should of
been)...
Found by: glebius & co.
Reviewed by: glebius
MFC after: 3 days
some systems were designed so that AML writes to various resources shared
with OS drivers, including the RTC, PIC, PCI, etc. These writes could
collide with writes by the OS and should never be performed. For now, we
print a message if such an access occurs, but do not block it. To block
the access, the tunable "debug.acpi.block_bad_io" can be set to 1. In the
future, we will flip the switch and this will become the default.
Information about this problem was found in Microsoft KB 283649. They
block IO accesses if the BIOS indicates via _OSI that it is Windows 2001
or higher. They always block accesses to the PIC, cascaded PIC, and ELCRs,
no matter how old the BIOS.
systems (blade servers). On most systems, this is implemented as an IO
write to the SMI port and the BIOS generates the actual reset.
PR: kern/94939
Submitted by: dodell@ixsystems.com
Reviewed by: jhb
MFC after: 3 weeks
foreign per-CPU pages in cpu_ipi_send() in order to get the module IDs
of the other CPUs can cause a page fault. If this happens when doing a
TLB shootdown while dealing with another page fault this causes a panic
due to the recursive page fault. As I don't spot other code that assumes
or requires that accessing foreign per-CPU pages must not page fault
solve this by adding a statically allocated (and therefore locked in the
kernel pages) array which establishes a FreeBSD CPU ID -> module ID
relation and use that in cpu_ipi_selected() (instead of statically
allocating the per-CPU pages which would just waste memory on say a dual
CPU machine as sun4u theoretically supports up to 128 CPUs or wasting
dTLB slots for the foreign per-CPU pages). [1]
- Fix a potential race in cpu_ipi_send(); as we don't serialize the access
to cpu_ipi_selected() between MI and MD use (only MI-MI and MD-MD) we
might catch the NACK bit caused by sending another IPI. Solve this by
checking the NACK bit in the contents of the interrupt dispatch status
reg read while interrupts were still turned off instead of reading that
reg anew after interrupts were turned on again. This is also what the
CPU docs suggest to do.
- Add a workaround for the SpitFire erratum #54 bug (affecting interrupt
dispatch). While public info regarding what this CPU bug actually causes
is not available testing shows that with the workaround in place it's
less likely to get a "couldn't send ipi" panic, it doesn't solve these
panics entirely though. [2]
Reported by: kris [1]
Some clue from: kmacy [1]
Info from: Linux, OpenSolaris [2]
Additional testing by: kris
MFC after: 3 days
Saab for helping to track this down. Fix a error with 32bit DMA size
calculation that seemed to be harmless. Add a few micro-optimizations while
I'm here.
generating a coredump as the result of a signal.
- Fix a bug where we could leak a Giant lock if vn_start_write() failed
in coredump().
Reported by: jmg (2)
mddestroy() only if the file is from a non-MPSAFE VFS.
- No longer unconditionally hold Giant in the md kthread for vnode-backed
kthreads.
- Improve the handling of the thread exit race when destroying an md
device.
and use that instead of testing fdidx against -1 to determine if it should
release Giant if Giant was locked due to the requested file residing on a
non-MPSAFE VFS.
Discussed with: jeff
get_cyclecount() as that results in a saner value and makes schedgraph
much happier on Alpha. (schedgraph doesn't handle the fact that the
counters are out of sync though)
as we have to call tick_init() before cninit() in order to provide the
low-level console drivers with a working DELAY() which in turn means we
cannot use panic() in tick_init().
- s,to high, too high, in the panic string
Inspired by: kmacy's sun4v changes
MFC after: 3 days
probably never fully applied to IPv6. Over time it has become more
stale, so replace it with something more up to date.
Reviewed by: ume
MFC after: 1 month
ipsec_copypkt(), as this is already handled by the call to M_MOVE_PKTHDR(),
which also knows how to correctly handle MAC m_tags. This corrects a panic
when running with MAC and KAME IPSEC.
PR: kern/94599
Submitted by: zhouyi zhou <zhouyi04 at ios dot cn>
Reviewed by: bz
MFC after: 3 days
arguments. The first one is never used (all callers pass in 0); the
second is sometimes used to pass in a struct timespec * which is used as
a timeout and never modified. Constify that argument so callers can pass
a const struct timespec * without jumping through hoops.
back to using the RSDT instead. ACPI-CA already follows this same strategy
as a workaround for yet another instance of brain-damaged BIOS writers.
PR: i386/93963
Submitted by: Masayuki FUKUI <fukui.FreeBSD@fanet.net>
now just make it clear station statistics (could read
a stat block and assign to caller can do partial changes)
Reviewed by: avatar (previous version)
MFC after: 1 week
acquiring Giant in kern_sendfile().
Guard against the forced reclamation of a vnode in kern_sendfile().
Discussed with: jeff
Reviewed by: tegge
MFC after: 3 weeks
ipxpcb mutex. Contrary to the comment, even in 4.x this was unsafe,
as parallel use of the socket by another process would result in pcb
corruption if the mbuf allocation slept.
MFC after: 1 month
a problem with listing large number of md(4) devices. Either 'list' or
'query' mode uses XML.
Additionally, new functionality was introduced. It's possible to pass
multiple devices to -u:
# ./mdconfig -l -u md0,md1
Approved by: cognet (mentor)
REGRESSION is enabled, allows user space to dictate that sonewconn()
should skip it's "skip the hard work" check to see if the listen
queue is full, and instead proceed with allocation of a socket and
trimming of the overflowed queue. This makes it easier to test the
queue overflow logic.
MFC after: 1 month
IPXP_DROPPED before continuing, and return EINVAL or ECONNRESET if
it is flagged. It's unclear why each situation should be one or
the other, but it is copied from netinet which has the same bugs.
MFC after: 1 month
as belonging to SPX. This replaces the implicit assumption that the cb
pointer for non-SPX pcb's will be NULL. This isn't required in TCP/IP
as different pcb lists are maintained for different IP protocols; IPX
stores all pcbs on the same global ipxpcb_list.
Foot provided by: gnn
MFC after: 1 month
Kernel changes:
Inform hwpmc of executable objects brought into the system by
kldload() and mmap(), and of their removal by kldunload() and
munmap(). A helper function linker_hwpmc_list_objects() has been
added to "sys/kern/kern_linker.c" and is used by hwpmc to retrieve
the list of currently loaded kernel modules.
The unused `MAPPINGCHANGE' event has been deprecated in favour
of separate `MAP_IN' and `MAP_OUT' events; this change reduces
space wastage in the log.
Bump the hwpmc's ABI version to "2.0.00". Teach hwpmc(4) to
handle the map change callbacks.
Change the default per-cpu sample buffer size to hold
32 samples (up from 16).
Increment __FreeBSD_version.
libpmc(3) changes:
Update libpmc(3) to deal with the new events in the log file; bring
the pmclog(3) manual page in sync with the code.
pmcstat(8) changes:
Introduce new options to pmcstat(8): "-r" (root fs path), "-M"
(mapfile name), "-q"/"-v" (verbosity control). Option "-k" now
takes a kernel directory as its argument but will also work with
the older invocation syntax.
Rework string handling in pmcstat(8) to use an opaque type for
interned strings. Clean up ELF parsing code and add support for
tracking dynamic object mappings reported by a v2.0.00 hwpmc(4).
Report statistics at the end of a log conversion run depending
on the requested verbosity level.
Reviewed by: jhb, dds (kernel parts of an earlier patch)
Tested by: gallatin (earlier patch)
reason, seems to be where new flags are getting defined:
INP_DROPPED - The protocol has terminated this connection and the socket
is not reusable: when the socket code enters the protocol,
an error is immediately returned. This will substitute for
NULLing the so_pcb socket field, helping to implement the
invariant that all valid sockets have valid pcb's in TCP.
INP_SOCKREF - The protocol has become the owner of the socket reference,
and will need to free it when freeing the pcb, which will
be used when a TCP socket is closed but still has queued
data.
MFC after: 1 month
the error on sparc64 hadn't changed since the last checkin, pass
LINT on other platforms and mpt doesn't work on sparc64 anyway
and the tinderbox build didn't work for me in a cross build case
on my main build machine (which runs RELENG_6). Sigh. Still
need to try harder.
