- make sure volume controls are correctly mapped to "pcm" and "rec" depending
on how they deliver audio to the USB host.
- make sure there are no duplicate record selections.
- remove internal only mixer class type.
- don't add software volume controls for recording only.
- some minor mixer code cleanup.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
The "for" loop on big endian was inverting all the bits instead of
just the words
Issue reported by TestSuite (msun lib nan_test case)
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: pfg, alfredo
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23926
The "kyua about" command assumes these files exist causing tests
supplied devel/kyua to fail.
Fix a bug defining the default KYUA_DOCDIR so the installed files can be
found.
Reported by: jenkins tests
Reviewed by: lwhsu
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24187
[PowerPC]: Don't allow r0 as a target for LD_GOT_TPREL_L/32
Summary:
The linker is free to relax this (relocation R_PPC_GOT_TPREL16)
against R_PPC_TLS, if it sees fit (initial exec to local exec). If r0
is used, this can generate execution-invalid code (converts to 'addi
%rX, %r0, FOO, which translates in PPC-lingo to li %rX, FOO). Forbid
this instead.
This fixes static binaries using locales on FreeBSD/powerpc (tested
on FreeBSD/powerpcspe).
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D76662
Requested by: jhibbits
MFC after: 6 weeks
X-MFC-With: 358851
[PowerPC]: e500 target can't use lwsync, use msync instead
The e500 core has a silicon bug that triggers an illegal instruction
program trap on any sync other than msync. Other cores will typically
ignore illegal sync types, and the documentation even implies that
the 'illegal' bits are ignored.
Address this hardware deficiency by only using msync, like the PPC440.
Differential Revision: https://reviews.llvm.org/D76614
Requested by: jhibbits
MFC after: 6 weeks
X-MFC-With: 358851
This change fixes a couple of issues with OPAL IPMI driver and
implements a mechanism to detect timeouts and discard old messages left
in receive queue, to avoid old messages from being confused with the
reply of new ones.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D24185
Property-based filters allow substring and regular expressions
(see re_format(7)) matching against various message attributes.
Filter specification starts with '#:' or ':' followed by three
comma-separated fields property, operator, "value". Value must be
double-quoted. A double quote and backslash must be escaped by a
blackslash.
Following properties are supported as test value:
o msg - body of the message received;
o programname - program name sent the message;
o hostname - hostname of message's originator;
o source - an alias for hostname.
Supported operators:
o contains - true if filter value is found as a substring of property;
o isequal - true if filter value is equal to property;
o startswith - true if property starts with filter value;
o regex - true if property matches basic regular expression defined
in filter value;
o ereregex - true if property matches extended regular expression
defined in filter value;
Operator may be prefixed by '!' to invert compare logic or by
'icase_' to make comparison function case insensitive.
Submitted by: Boris N. Lytochkin <lytboris at gmail com>
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23468
Those libs aren't needed anymore so stop building them for the bootstrap tools
or the compat libs.
Reviewed by: bapt, emaste
X-Differential Revision: D24171
The goal of this change is to make the atomic_load_acq_{8,16},
atomic_testandset{,_acq}_long, and atomic_testandclear_long primitives
available in MI-namespace.
The second goal is to get this draft out of my local tree, as anything that
requires a full tinderbox is a big burden out of tree. MD specifics can be
refined individually afterwards.
The generic implementations may not be ideal for your architecture; feel
free to implement better versions. If no subword_atomic definitions are
needed, the include can be removed from your arch's machine/atomic.h.
Generic definitions are guarded by defined macros of the same name. To
avoid picking up conflicting generic definitions, some macro defines are
added to various MD machine/atomic.h to register an existing implementation.
Include _atomic_subword.h in arm and arm64 machine/atomic.h.
For some odd reason, KCSAN only generates some versions of primitives.
Generate the _acq variants of atomic_load.*_8, atomic_load.*_16, and
atomic_testandset.*_long. There are other questionably disabled primitives,
but I didn't run into them, so I left them alone. KCSAN is only built for
amd64 in tinderbox for now.
Add atomic_subword implementations of atomic_load_acq_{8,16} implemented
using masking and atomic_load_acq_32.
Add generic atomic_subword implementations of atomic_testandset_long(),
atomic_testandclear_long(), and atomic_testandset_acq_long(), using
atomic_fcmpset_long() and atomic_fcmpset_acq_long().
On x86, add atomic_testandset_acq_long as an alias for
atomic_testandset_long.
Reviewed by: kevans, rlibby (previous versions both)
Differential Revision: https://reviews.freebsd.org/D22963
Change type of variable used in setsocketopt so correct size of
option is passed.
Test failure was identified when running the test on PowerPC64,
and the following error message was seen:
"bind () failed: Address already in use"
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: melifaro, adalava
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D24164
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
zfs create, receive and rename can bypass this hierarchy rule. Update
both userland and kernel module to prevent this issue and use pyzfs
unit tests to exercise the ioctls directly.
Note: this commit slightly changes zfs_ioc_create() ABI. This allow to
differentiate a generic error (EINVAL) from the specific case where we
tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Approved by: mav (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
openzfs/zfs@d8d418ff0c
rc scripts arent configuration files so use FILES instead of CONFS.
While here put rc scripts into related package (sendmail in the FreeBSD-sendmail
package, wpa_supplicant in the FreeBSD-wpa etc ...)
Reviewed by: bapt, emaste
Differential Revision: https://reviews.freebsd.org/D24177
Original commit message:
bsd.lib.mk: Do not include bsd.incs.mk for INTERNALLIB
f we're building an internal lib do not bother including bsd.incs.mk so we
will not install the headers.
This also "solves" a problem with pkgbase where a libXXX-development package
is created and due to how packages are created we add a dependency to a
libXXX package that doesn't exists.
For the final step of the native-xtools target, "everything" is built
with TARGET and TARGET_ARCH set to the architecture we wish to
cross-build for. However, CROSSENV overwrites the values of MACHINE and
MACHINE_ARCH, setting them to be identical to TARGET and TARGET_ARCH.
For native-xtools this is undesirable since we are building binaries to
run on the host architecture, that can cross compile for the target
architecture.
When building native-xtools for RISC-V, this issue manifests as an invalid
argument for "-march". The compiler is invoked with the target triple of the
host architecture, but the CFLAGS inherited from bsd.cpu.mk are that of the
target architecture.
Reviewed by: imp, bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23838
parameters of the timer start and stop routines. Several inconsistencies
have been fixed in earlier commits. Now they will be catched when running
an INVARIANTS system.
MFC after: 1 week
We handle a number of stale dependency issues on an ad-hoc basis, in
order to support ongoing NO_CLEAN builds. These hacks do not need to
be maintained indefinitely; now remove those for issues that are more
than a year old.
Sponsored by: The FreeBSD Foundation
