According to the SMBIOS specification (revision 2.7 or newer), the
extended module size field should only be used for sizes that can't
fit in the older size field.
Reviewed by: rgrimes, grehan, jhb
Differential Revision: https://reviews.freebsd.org/D24107
Interfaces may be detached from a taskqueue_thread task, for example by
prison_complete(), so after r359438, when draining the queue we may end
up deadlocking.
Reported by: Jenkins via lwhsu
MFC with: r359438
KTLS uses the embedded header and trailer fields of unmapped
mbufs. This can lead to "silly" buffer lengths, where we have an
mbuf chain that will create a scatter/gather lists with a
regular pattern of 13 bytes followed by 16 bytes between each
adjacent TLS record.
For software ktls we typically wind up with a pattern where we
have several TLS records encrypted, and made ready at once. When
these records are made ready, we can coalesce these silly buffers
in sbready_compress by copying 13b TLS header of the next record
into the 16b TLS trailer of the current record. After doing so,
we now have a small 29 byte chunk between each TLS record.
This marginally increases PCIe bus efficiency. We've seen an
almost 1Gb/s increase in peak throughput on Broadwell based Xeons
running a 100% software TLS workload with Mellanox ConnectX-4
NICs.
Note that this change is ifdef'ed for KTLS, as KTLS is currently
the only user of the hdr/trailer feature of unmapped mbufs, and
peeking into them is expensive, since the ext_pgs struct lives in
separately allocated memory, and may be cold in cache.
This optimization is not applicable to HW ("NIC") TLS, as that
depends on having the entire TLS record described by a single
unmapped mbuf, so we cannot shift parts of the record between
mbufs for HW TLS.
Reviewed by: jhb, hselasky, scottl
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24204
- Do not call into a vnode pager while leaving some pages from the
same block as the current run, xbusy. This immediately deadlocks if
pager needs to instantiate the buffer.
- Only relookup bogus pages after io finished, otherwise we might
obliterate the valid pages by out of date disk content. While there,
expand the comment explaining this pecularity.
- Do not double-unbusy on error. Split unbusy for error case, which
is left in the sendfile_swapin(), from the more properly coded
normal case in sendfile_iodone().
- Add an XXXKIB comment explaining the serious bug in the validation
algorithm, not fixed by this patch series.
PR: 244713
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
It is already done by sendfile_iodone(), now consistently for all errors.
This de-facto reverts r358597, after r359466.
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
Now sfio leaks are more easily seen in the malloc statistics than
e.g. just wired or busy pages leak.
Reviewed by: glebius, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24038
While here, drop an extra conjunction from the list of error
conditions for the remaining EIO description in symlink(2).
Discussed with: mckusick (trimming duplicates)
MFC after: 2 weeks
EINTEGRITY was previously documented as a UFS-specific error for
mount(2). This documents EINTEGRITY as a filesystem-independent error
that may be reported by the backing store of a filesystem.
While here, document EIO as a filesystem-independent error for both
mount(2) and posix_fadvise(2). EIO was previously only documented for
UFS for mount(2).
Reviewed by: mckusick
Suggested by: mckusick
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24168
It's rather awkward to debug issues with the dependency cleanup hacks
when implemented via make. Add a cleanup shell script and move the
libomp hack there as an initial example.
Reviewed by: brooks
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24228
I did add some more glyphs to provide box drawing and set of additional
glyphs to provide better support for some code pages. Still does not quite
match terminus.
In-tree gdb is essentially obsolete. We kept it for sparc64 (because
gdb in ports lacked sparc64 support) and as a fallback for crashinfo.
gdb was installed to /libexec on all archs other than sparc64, where the
WITHOUT_GDB_LIBEXEC option was default, with gdb installed to /usr/bin.
With sparc64's retirement WITH_GDB_LIBEXEC became the default for all
architectures, but it was still possible to set it off and install gdb
into /usr/bin.
As the next step in gdb's retirement, remove the option and install gdb
only into /libexec as the crashinfo fallback. We expect users to install
the gdb port or package for debugging. The in-tree gdb lacks support for
a number of supported architectures and does not support contemporary
DWARF debug info.
Reviewed by: jhb (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24227
After the base kyua import the testsuite can utilize the in-base kyua
just fine.
Submitted by: Dries Michiels
Differential Revision: https://reviews.freebsd.org/D24230
The bootstrap flua should not be used for REPL-like activities; exclude it
to save the dependency on libedit and not waste time with it.
X-MFC-With: r359453
Implement one mutex per cuse(3) server instance which also cover the
clients belonging to the given server instance.
This should significantly reduce the mutex congestion inside the
cuse(3) kernel module when multiple servers are in use.
MFC after: 1 week
Sponsored by: Mellanox Technologies
device. This requires some structural refactoring inside the driver, mostly
about converting existing audio channel structures into arrays.
The main audio mixer is provided by the first PCM instance.
The non-first audio instances may only have a software mixer for PCM playback.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
key is pressed at the same time as a regular key, that means key with
modifier is output. Some automated USB keyboards like Yubikeys need this.
This fixes a regression issue after r357861.
Reported by: Adam McDougall <mcdouga9@egr.msu.edu>
PR: 224592
PR: 233884
MFC after: 3 days
Sponsored by: Mellanox Technologies
taskqgroup initialization was broken into two steps:
1. allocate the taskqgroup structure, at SI_SUB_TASKQ;
2. initialize taskqueues, start taskqueue threads, enqueue "binder"
tasks to bind threads to specific CPUs, at SI_SUB_SMP.
Step 2 tries to handle the case where tasks have already been attached
to a queue, by migrating them to their intended queue. In particular,
tasks can't be enqueued before step 2 has completed. This breaks NFS
mountroot on systems using an iflib-based driver when EARLY_AP_STARTUP
is not defined, since mountroot happens before SI_SUB_SMP in this case.
Simplify initialization: do all initialization except for CPU binding at
SI_SUB_TASKQ. This means that until CPU binding is completed, group
tasks may be executed on a CPU other than that to which they were bound,
but this should not be a problem for existing users of the taskqgroup
KPIs.
Reported by: sbruno
Tested by: bdragon, sbruno
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24188
As a followup to the use of login.conf environment vars (other than PATH) in
cron, this patch adds PATH (and HOME) to the list of login.conf settings
respected.
The new logic is as follows:
1. SHELL is always _PATH_BSHELL unless explicitly overridden in the crontab
file itself; no other settings are respected. This is unchanged.
2. PATH is taken from the first of: crontab file, login.conf, _PATH_DEFPATH
3. HOME is taken from the first of: crontab file, login.conf, passwd entry,
unset
4. The current directory for invoking the command is taken from the crontab
file's value of HOME (existing behavior), or the passwd entry, but not
anywhere else (so it might not equal HOME if that was set in login.conf).
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: sigsys_gmail.com
Differential Revision: https://reviews.freebsd.org/D23597
debug was declared extern, but debug_file was not; correct this and define
debug_file in main.c (as debug is) to fix the -fno-common build.
-fno-common will become the default with GCC10/LLVM11.
MFC after: 3 days
As described in the comment, gdb relies on some of the linker magic that
happens with -fcommon. I suspect the life expectancy of gdb-in-base is low
enough that this isn't worth spending much time addressing, especially given
the vintage. Hit it with the -fcommon hammer so that it continues to just
work.
MFC after: 3 days
Incompatibility between i386 and amd64 evdev ABIs was caused by presence of
'struct timeval' in evdev protocol. Replace it with 'struct timeval32' for
32 bit binaries.
Big-endian platforms may require additional work due to bitstr_t (array of
unsigned longs) usage in ioctl interface.
MFC after: 2 weeks
This one is also a small list:
- 3x duplicate definition (ufs2_zino, returntosingle, nflag)
- 5x 'needs extern', 3/5 of which are referenced in fsdb
-fno-common will become the default in GCC10/LLVM11.
MFC after: 1 week
This is currently staged in vendor/ as part of the 8.0p1 import, which isn't
quite ready to land. Given that this is a simple one-line fix, apply it now
as the fallout will be pretty minimal.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
net.inet.tcp.pmtud_blackhole_detection. Also remove three entries,
which are not sysctl variables but statistic counters for TCP.
Thanks to 0mp@ for suggesting an improvement.
Reviewed by: bcr@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24216
