As documented in the HiFive Unmatched Software Reference Manual.
Reviewed by: imp, mhorne
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34010
This function will be used by coming TLS hardware receive offload support.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
Although send tags are strictly used for transmit, the name might be changed
in the future to be more generic.
The TLS receive tags support regular IPv4 and IPv6 traffic, and also over any
VLAN. If prio-tagging is enabled, VLAN ID zero, this must be checked in the
network driver itself when creating the TLS RX decryption offload filter.
TLS receive tags have a modify callback to tell the network driver about
the progress of decryption. Currently decryption is done IP packet by IP
packet, even if the IP packet contains a partial TLS record. The modify
callback allows the network driver to keep track of TCP sequence numbers
pointing to the beginning of TLS records after TCP packet reassembly.
These callbacks only happen when encrypted or partially decrypted data is
received and are used to verify the decryptions starting point for the
hardware. Typically the hardware will guess where TLS headers start and
needs help from the software to know if the guess was correct. This is
the purpose of the modify callback.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
TCP_BBR:
- Fix a typo introducted in 1b90dfa5d2, which was reported by tuexen@
TCP_RACK:
- Correct two sysctl descriptions: s/corret/correct/
tcp_bbr(4): Also fix s/measurment/measurement/ in the man page
MFC after: 1 week
There's a small race in freezing the simq when performing a diagnostic
reset. During this time, a transaction can slip through and encounter
the target id of 0. If we're still in diagnostic reset when we detect
this, return a CAM_DEVICE_NOT_THERE status. Instead, freeze the queue
and return a requeue status, similar to what we do when we're resetting
a target and a transaction get here. The race is unavoidable due to
separate locks for queue and SIM, but easy enough to detect and make
harmless.
Sponsored by: Netflix
Reviewed by: scottl, mav
Differential Revision: https://reviews.freebsd.org/D34017
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
Don't emit warnings; this isn't any different from a Linux kernel
built without OPTIONS_SECCOMP, so the userspace already needs to know
how to deal with it. This is also similar with how we handle seccomp
in linux_prctl().
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33808
Try to live with cruel reality fact - if_vmove doesn't move an
interface from previous vnet cloning infrastructure to the new
one. Let's admit this as design feature and make it work better.
* Delete two blocks of code that would fallback to vnet0, if a
cloner isn't found. They didn't do any good job and also whole
idea of treating vnet0 as special one is wrong.
* When deleting a cloned interface, lookup its cloner using it's
home vnet.
With this change simple sequence works correctly:
ifconfig foo0 create
jail -c name=jj persist vnet vnet.interface=foo0
jexec jj ifconfig foo0 destroy
Differential revision: https://reviews.freebsd.org/D33942
* Do a single call into if_clone.c instead of two. The cloner
can't disappear since the interface sits on its list.
* Make restoration smarter - check that cloner with same name
exists in the new vnet.
Differential revision: https://reviews.freebsd.org/D33941
When sending an NS, check if we are using a IPv6 CARP address
and if we do, then put proper CARP link level address into
ND_OPT_SOURCE_LINKADDR option and also put PACKET_TAG_CARP tag
on the packet. The latter will enforce CARP link level address
at the data link layer too, which might be necessary for broken
implementations.
The code really follows what NA sending code has been doing since
introduction of carp(4). While here, bring to style(9) the whole
block of code.
PR: 193280
Differential revision: https://reviews.freebsd.org/D33858
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Adds a new function pointer to struct if_txrx in order to allow
drivers to set their own function that will determine which queue
a packet should be sent on.
Since this includes a kernel ABI change, bump the __FreeBSD_version
as well.
(This motivation behind this is to allow the driver to examine the
UP in the VLAN tag and determine which queue to TX on based on
that, in support of HW TX traffic shaping.)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@, stallamr@netapp.com
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31485
options IPSEC is already documented as requiring 'device crypto' and
duplicating the dependencies is harder to read and not always
consistent.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33990
This adds a wrapper around libsodium's curve25519 support matching
Linux's curve25519 API. The intended use case for this is WireGuard.
Note that this is not integrated with OCF as it is not related to
symmetric operations on data.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33935
Previously this would only handle a single PDU that did not contain
any data. This should now handle an arbitrary number of PDUs.
While here check for these PDUs in the T6-specific CPL_RX_ISCSI_CMP
handler in addition to CPL_RX_ISCSI_DDP.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
The discovery callout is initialized and cancelled only, making it
write-only. Remove a state flag associated with it being pending as well
as two defines that aren't used that are associated with it. Remove
MP?SAS_SHUTDOWN flag, which is unused.
Sponsored by: Netflix
Reviewed by: ken, scottl, mav
Differential Revision: https://reviews.freebsd.org/D33925
This matches user_getsockname.
Reviewed by: brooks, kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33987
Some of the changes in this release:
- IPv6 L4 checksum offload fixes.
- Optimization of the Tx req_id validation.
- Timer service adjustments.
- NUMA awareness for the kernel RSS mode.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
If the device becomes unresponsive, the driver will not be able to
finish the reset process correctly. Timeout during version validation
indicates that the device is currently not responding. In that case
do not perform the reset and instead reschedule timer service. Because
of that the driver will continue trying to reset the device until it
succeeds or is detached.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
The timer service was started when the interface was brought up and it
was stopped when it was brought down. Since ena_up requires the device
to be responsive, triggering the reset would become impossible if the
device became unresponsive with the interface down.
Since most of the functions in timer service already perform the check
to see if the device is running, this only requires starting the callout
in attach and stopping it when bringing the interface up or down to
avoid race between different admin queue calls.
Since callout functions for timer service are always called with the
same arguments, replace callout_{init,reset,drain} calls with
ENA_TIMER_{INIT,RESET,DRAIN} macros.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Since `ena_com_tx_comp_req_id_get` already checks for `req_id` validity,
the logic was exiting early, never giving `validate_tx_req_id` a chance
to trigger device reset.
Rewrite the logic so that device reset is called based on return value
of `ena_com_tx_comp_req_id_get` instead.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
ena_tx_csum function did not check if IPv6 checksum offload was
requested it only checked checksum offloading flags for IPv4 packets.
Because of that, when encountering CSUM_IP6_* flags, the function simply
returned without actually setting checksum offloading in ena_ctx.
Check CUSM_IP6_* flags to enable IPv6 checksum offload.
Additionally, only IPv4 header was being parsed regardless of EtherType
field, because of that, value of L4 protocol read when actually trying
to send IPv6 packets was wrong. Use ip6_lasthdr function to get length
of all IPv6 headers and payload protocol.
Set the DF flag to 1 in order to allow the device to offload the IPv6
checksum calculation and achieve optimal performance.
Add CSUM6_OFFLOAD and CSUM_OFFLOAD definitions into ena_datapath.h.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Merge commit '2530eb1fa01bf28fbcfcdda58bd41e055dcb2e4a'
Adjust the driver to the upgraded ena-com part twofold:
First update is related to the driver's NUMA awareness.
Allocate I/O queue memory in NUMA domain local to the CPU bound to the
given queue, improving data access time. Since this can result in
performance hit for unaware users, this is done only when RSS
option is enabled, for other cases the driver relies on kernel to
allocate memory by itself.
Information about first CPU bound is saved in adapter structure, so
the binding persists after bringing the interface down and up again.
If there are more buckets than interface queues, the driver will try to
bind different interfaces to different CPUs using round-robin algorithm
(but it will not bind queues to CPUs which do not have any RSS buckets
associated with them). This is done to better utilize hardware
resources by spreading the load.
Add (read-only) per-queue sysctls in order to provide the following
information:
- queueN.domain: NUMA domain associated with the queue
- queueN.cpu: CPU affinity of the queue
The second change is for the CSUM_OFFLOAD constant, as ENA platform
file has removed its definition. To align to that change, it has been
added to the ena_datapath.h file.
Submitted by: Artur Rojek <ar@semihalf.com>
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Notable upstream pull request merges:
#12766 Fix error propagation from lzc_send_redacted
#12805 Updated the lz4 decompressor
#12851 FreeBSD: Provide correct file generation number
#12857 Verify dRAID empty sectors
#12874 FreeBSD: Update argument types for VOP_READDIR
#12896 Reduce number of arc_prune threads
#12934 FreeBSD: Fix zvol_*_open() locking
#12947 lz4: Cherrypick fix for CVE-2021-3520
#12961 FreeBSD: Fix leaked strings in libspl mnttab
#12964 Fix handling of errors from dmu_write_uio_dbuf() on FreeBSD
#12981 Introduce a flag to skip comparing the local mac when raw sending
#12985 Avoid memory allocations in the ARC eviction thread
Obtained from: OpenZFS
OpenZFS commit: 17b2ae0b24
Disable the gdb packet run length encoding for 3-symbol repetitions.
While it is technically possible to encode them, they have no advantage
over sending the characters verbatim (the resulting length is the same)
and they result in sending non-printable \x1f character. The protocol
has been designed with the intent of avoiding non-printable characters
and therefore the run length encoding is biased to emit \x20 (a space)
with the minimal intended run length of 4.
While at it, simplify the logic by merging the different 'if' blocks
into a single while loop, and moving 'runlen == 0' check lower.
Reviewed by: cem, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33686
