Peter Wemm
36cb9d91a7
Remove old specialix pre-newbus specialix driver. It lives on in
...
sys/dev/si now, including with a theoretically working eisa attachment.
2000-01-24 08:18:26 +00:00
Bruce Evans
13d4ed2caa
Removed assignment to an "unused" variable that was removed in the
...
previous commit. Building LINT didn't expose this bug, because the
assignment was in an ifdef that is too tangled for LINT to cover
properly.
2000-01-24 08:16:15 +00:00
Peter Wemm
cd382292be
Use si.h in new location.
2000-01-24 08:15:42 +00:00
Peter Wemm
2c469a0672
Remove isa compat shims for si.
2000-01-24 08:13:53 +00:00
Peter Wemm
623c24674d
Activate the newbusified version of si.
2000-01-24 08:12:40 +00:00
Peter Wemm
67d5be5275
Ack! I totally botched the pci probe routine which resulted in it trying
...
to match everything else *but* a specialix pci card. *blush*.
2000-01-24 08:11:10 +00:00
Peter Wemm
b830d4388e
A bit more newbusification of si. This still isn't quite finished.
...
Split out the bus attachments so the impact of the bus xxxvar.h files
with the inline macros for the ivars are confined to one file each.
2000-01-24 07:24:02 +00:00
Warner Losh
25f061dedd
Fix plug and play support:
...
o Cut out the probed stuff. We no longer need it since newbus implicitly
checks for this (likely bt can be changed as well in this way).
o Add preliminary support for unload. Untested because aha doesn't yet
support identify and there are some interactions with PnP that I've
not yet worked out.
With this I can boot the AHA-1542CP FW F.0. All the aha resources
appear to be picked up via pnp now.
2000-01-24 07:08:40 +00:00
Bruce Evans
621d865f30
Removed bogus quotes and unmangled related contractions.
...
"ktrace(1) syscall trace" -> "ktrace(1)".
2000-01-24 05:38:55 +00:00
Warner Losh
d9213675fb
Add Billionton 10 Base-TX ETHERNET PC CARD.
...
This entry has a high likelyhood of conflicting with others since the CIS
identifies this as "PCMCIA" "PCMCIA-ETHERNET-CARD".
2000-01-24 05:35:32 +00:00
Alfred Perlstein
621d130fd8
Clarify that we don't offer hard realtime.
...
Split timeval options into 3 paragraphs, it's easier on my eyes.
2000-01-24 02:13:21 +00:00
David E. O'Brien
7b5036eb77
In the "cdrom" target it is best to write to the CDROM stage area, *NOT*
...
the FTP stage area.
2000-01-24 01:22:30 +00:00
Peter Wemm
5b249744bd
Initial attempt at newbusification of the specialix si/xio/sx driver.
...
The files were repo copied from their original location and are part
way towards being portable.
This should unbreak the EISA support in the driver.
I have not updated files* yet as I'm not quite finished.
2000-01-23 22:51:49 +00:00
David E. O'Brien
0eb6f1f6c1
I *hate* using "i" in variables, looks too much like "1" or "l".
2000-01-23 22:46:00 +00:00
Jun Kuriyama
3d5eb0b813
Whitespace/TAB cleanups only.
2000-01-23 22:02:36 +00:00
Jeroen Ruigrok van der Werven
a7406a14b3
Change this to reflect some manpage changes I made.
2000-01-23 21:53:31 +00:00
Philippe Charnier
f73aae7e60
Spelling. Add missing .El.
2000-01-23 20:36:27 +00:00
Philippe Charnier
b8d1ce7ebf
Remove invalid section name. Add missing .El.
2000-01-23 20:33:38 +00:00
Philippe Charnier
0518c2b948
Remove invalid section name.
2000-01-23 20:32:24 +00:00
Philippe Charnier
a90c17f501
Add a FILES section.
2000-01-23 20:29:46 +00:00
Philippe Charnier
497adc8286
Use .Xr for references.
2000-01-23 20:28:41 +00:00
Philippe Charnier
1e7ae6a9af
Add missing .El.
...
-Wall cleaning.
2000-01-23 20:27:32 +00:00
Philippe Charnier
97e84c76fd
Do not dot terminate list of references.
2000-01-23 20:26:20 +00:00
Philippe Charnier
bb897a8710
Convert err() to errx(), reason is already provided. Complete the
...
abort on allocation failure instead of deferencing NULL later.
2000-01-23 20:25:01 +00:00
Philippe Charnier
e6df6417f2
Typo
2000-01-23 20:23:38 +00:00
Philippe Charnier
922a51eea0
Add section number to .Xr. Use .Pa for filenames.
...
fprintf -> warnx.
2000-01-23 20:22:23 +00:00
Philippe Charnier
fea43bdfa5
Remove invalid section name. Add missing .El. Do not dot terminate
...
sentences in FILES section.
2000-01-23 20:20:55 +00:00
Philippe Charnier
5d4a8fa90e
Rework use of Nm.
...
Remove -? flag that was not working but documented. Make it work instead
but hide it in man page and usage string as others tools do.
Spelling.
Abort on allocation failure (with errx()).
2000-01-23 20:19:34 +00:00
Philippe Charnier
e2b7d85745
Do not dot terminate sentences inside FILES section. Lowercase
...
inside error messages.
2000-01-23 20:17:41 +00:00
Philippe Charnier
d67724c7c9
Use Ns and Sx. -current is 4 not 3.
2000-01-23 20:16:21 +00:00
Peter Wemm
fe8140cd15
Fix some warnings.
2000-01-23 19:27:11 +00:00
Peter Wemm
62797de451
remove "extern int cold" from SPLUSBCHECK - it causes a heap of warnings.
2000-01-23 19:26:16 +00:00
Peter Wemm
10a1190c8b
Fix a warning in DIAGNOSTIC code.
2000-01-23 19:25:29 +00:00
Peter Wemm
90c55ca555
Sync NEWCARD a bit with GENERIC. Remove trailing '0' on unwired devices.
2000-01-23 18:31:19 +00:00
Peter Wemm
97608dbe74
Some formatting cleanups and remove comments about numbers of units that
...
were intended to head off confusion about the trailing '0'.
2000-01-23 18:30:35 +00:00
Jeroen Ruigrok van der Werven
f84a44a497
Get rid of lame \& usage.
2000-01-23 18:30:17 +00:00
Jeroen Ruigrok van der Werven
038ec87581
Please welcome the mlx driver manpage.
2000-01-23 18:25:49 +00:00
Peter Wemm
6ff37636a3
Remove #if 0'ed reference to isa_device->id_alive
2000-01-23 18:21:20 +00:00
Jeroen Ruigrok van der Werven
016266b9b5
Please welcome the amr driver manpage.
2000-01-23 18:12:56 +00:00
Peter Wemm
8ef328cfe9
Remove the cam-specific device wiring code. This was a duplicate of
...
the data in the resource tables, and cam is getting it directly now.
2000-01-23 18:05:24 +00:00
Peter Wemm
75f51904b5
A minimal update to the device wiring code so that it looks at the
...
dynamic resource tables rather than relying on a duplicated cam-specific
table generated by config(8) in ioconf.c. This was a major holdup to
getting loader / userconfig driven configuration of scsi wiring.
2000-01-23 18:03:38 +00:00
Jeroen Ruigrok van der Werven
a9d84bd07c
Remove ssc(4), su(4) and uk(4).
...
These have been surpassed by CAM/xpt/pass/camcontrol(8) and libcam.
OK'd by: peter
2000-01-23 17:48:19 +00:00
Jeroen Ruigrok van der Werven
cfcdae067b
Third round of config related changes to the manpages.
...
device blah0 -> device blah for PCI devices and busses.
2000-01-23 17:00:18 +00:00
Jeroen Ruigrok van der Werven
b9781e2007
Second round of config related changes to the manpages.
...
device blah0 -> device blah for PCI devices and busses.
2000-01-23 16:13:26 +00:00
Nick Hibma
db972b58b5
Check whether we can change config at all. If any of the endpoints
...
has been opened, we should not allow configuration changes as endpoint
descriptors might disappear.
PR: 16256, 16168
2000-01-23 15:48:29 +00:00
Boris Popov
8dc74b6288
Backout previous commit. It was a mistake.
2000-01-23 15:47:46 +00:00
Peter Wemm
647b247c34
oops, nearly forgot to commit the addition of ppbus_if.m to the list.
2000-01-23 15:42:44 +00:00
Nick Hibma
bf79729b6e
Zap the vnodes for the control endpoint as well.
2000-01-23 15:42:08 +00:00
Peter Wemm
5331081645
Add an example vpo module. I don't have a zip drive to test it, but it
...
behaves the normal way when loaded at runtime versus being statically
compiled. (normal == print garbage on the printer :-).
2000-01-23 15:26:15 +00:00
Nick Hibma
9c918de3de
Return ENXIO on error, not 0. Seems to have been skipped when converting
...
to newbus.
Reviewed by: bde
2000-01-23 15:11:15 +00:00