Seigo Tanimura
5ddd093d23
Add the system default timer engine.
2002-01-04 01:16:18 +00:00
Seigo Tanimura
995231304d
- Provide toggles to show debug messages. Set new sysctl variables
...
hw.midi.debug and hw.midi.seq.debug to 1 to enable debug log.
- Make debug messages human-frendly.
- Implement /dev/music.
- Add a timer engine required by /dev/music.
- Fix nonblocking I/O.
- Fix the numbering of midi and synth devices.
2002-01-04 01:13:49 +00:00
Seigo Tanimura
05331bc6d4
- Do not uiomove with a mutex locked.
...
- Move from msleep/wakeup to condvar.
- Return either zero or a positive errno value from a function.
Return additional result via references.
- Unify the typedef of callback functions.
2002-01-01 17:36:26 +00:00
Cameron Grant
193d571957
make mmapped vchans work
2001-12-23 13:10:29 +00:00
Pierre Beyssac
5a8c4e90b9
Fixes apparent hang at probe time due to an extremely long timeout
...
(experienced with an Opti931/ISA PnP card).
Approved by: cg
2001-12-21 23:26:55 +00:00
Cameron Grant
b83a42d36f
fix mmapped playback
...
remove dead debugging code
2001-12-21 22:34:01 +00:00
Orion Hodson
aaa167872e
Save and restore state for suspend/resume.
...
PR: kern/28692
Obtained from: SAKIYAMA Nobuo <sakichan@sakichan.org>
2001-12-21 19:20:28 +00:00
Orion Hodson
df6ee7b7a1
Correct unexpected interrupt detection.
2001-12-19 18:26:53 +00:00
Orion Hodson
faee270315
Nitlets.
2001-12-19 18:04:04 +00:00
Orion Hodson
23d2179744
Clear resume interrupts - these can occur during initialization and
...
must be cleared to prevent machine hanging (presently aflicts -current
and -stable).
Problem reported by Bruce Montague <brucem@cse.iitkgp.ernet.in>
PR: kern/29769 (probably)
2001-12-19 17:38:38 +00:00
Orion Hodson
0225c5ac86
Add calibration test to determine extent of AC97 overclocking (if any).
2001-12-18 03:29:31 +00:00
John Baldwin
7e1f6dfe9d
Modify the critical section API as follows:
...
- The MD functions critical_enter/exit are renamed to start with a cpu_
prefix.
- MI wrapper functions critical_enter/exit maintain a per-thread nesting
count and a per-thread critical section saved state set when entering
a critical section while at nesting level 0 and restored when exiting
to nesting level 0. This moves the saved state out of spin mutexes so
that interlocking spin mutexes works properly.
- Most low-level MD code that used critical_enter/exit now use
cpu_critical_enter/exit. MI code such as device drivers and spin
mutexes use the MI wrappers. Note that since the MI wrappers store
the state in the current thread, they do not have any return values or
arguments.
- mtx_intr_enable() is replaced with a constant CRITICAL_FORK which is
assigned to curthread->td_savecrit during fork_exit().
Tested on: i386, alpha
2001-12-18 00:27:18 +00:00
Orion Hodson
2ae4ee833d
Added a sysctl control variable "ac97rate" to allow manual tuning of
...
the link rate - some ich motherboards overclock ac97 out of the box.
Will hopefully replace this with a callibration loop in time for 4.5R
freeze.
Problem reported by Luigi Rizzo and fix derived from his code (put
diff in ich.c rather than ac97.c).
MFC after: 3 days
2001-12-17 01:57:42 +00:00
Orion Hodson
1abb0234c3
Addition of sysctl variable to enable spdif. By default spdif is disabled.
...
MFC after: 3 days
2001-12-17 01:39:36 +00:00
Guido van Rooij
b60e55dbd0
Get rid of irritating (bogus) message:
...
pcm0: ac97 codec failed to reset extended mode (0, got 80)
This was due to not masking off the correct extended function bits
in the read value from the extended status reg.
MFC after: 2 days
2001-12-10 20:27:18 +00:00
David E. O'Brien
6e551fb628
Update to C99, s/__FUNCTION__/__func__/,
...
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Guido van Rooij
3068bdba98
Fix resume for HP Omnibook 500's.
...
MFC after: 1 week
2001-12-05 10:36:32 +00:00
Mitsuru IWASAKI
a02ab1042e
Add suspend/resume support.
...
MFC after: 1 week
2001-11-24 18:00:33 +00:00
Orion Hodson
21f3068887
Fix typo introduced with last commit.
2001-11-22 23:38:26 +00:00
Orion Hodson
eb5b9d0b87
Correct extmode initialization.
...
MFC after: 3
2001-11-21 04:26:04 +00:00
Orion Hodson
647fbfebc5
Emit a warning if invalid mode passed to ac97_setextmode.
...
MFC after: 3 days
2001-11-21 04:08:10 +00:00
Orion Hodson
2065c8c619
Set extmode according to extcaps. Fixes codec sample rate failures
...
that causes noisy playback with rates other than 48k (reported by
Olexander Kunytsa).
MFC after: 3 days
2001-11-21 04:06:52 +00:00
Jeroen Ruigrok van der Werven
41425f4fac
Remove clkrun_hack for ThinkPad 570.
...
PR: 28031
Submitted by: Tan Koan-Sin <freedom@csie.nctu.edu.tw>
MFC after: 2 weeks
2001-11-15 18:51:08 +00:00
Seigo Tanimura
b9d9d8e74c
Avoid crash of minor numbers between /dev/midistat and /dev/dspr*.
2001-11-03 12:47:19 +00:00
Peter Wemm
aaa3add4ea
Add Id for 82801CA (ICH3?). The ich driver seems to work fine on the
...
laptop that had it.
2001-11-03 05:07:59 +00:00
John Baldwin
02185af5a9
Change the module name from 'snd_sonicvibes' to 'snd_vibes' as that is
...
the filename (thus the "old" module name) and the name used by
snd_driver.ko.
2001-10-24 21:44:07 +00:00
John Baldwin
579f17a038
Change module name from 'snd_als' to 'snd_als4000' to match name in
...
snd_driver.ko.
2001-10-24 21:42:06 +00:00
John Baldwin
0ff24d06f7
Change the module name from 'via' to 'snd_via82c686' to match the KLD
...
filename and in snd_driver.ko.
2001-10-24 21:38:08 +00:00
John Baldwin
ee1fbec1bf
Change the module name from 'snd_cmipci' to 'snd_cmi' to match the
...
filename, module name in the loader, the dependency in snd_driver.ko, and
to be consistent with other sound drivers.
2001-10-24 21:35:31 +00:00
Cameron Grant
16a33022e7
fix SNDCTL_DSP_GETISPACE behaviour
2001-10-24 12:40:54 +00:00
Cameron Grant
8309fd9aef
improve recording behaviour
2001-10-24 12:33:21 +00:00
Warner Losh
565fcd9dbb
These two used sioreg.h as well. This is mildly bogus, but it is harder
...
to fix right in a hurry.
This (almost) fixes LINT.
Submitted by: bde
2001-10-22 15:59:49 +00:00
Scott Long
73b9d66d9a
Turn on the hardware volume buttons that are present on most laptops with
...
these chips. There is a new hint, hint.pcm.N.hwvol_config, that can be set
to 1 or 0 to select which pins the buttons are connected to. I'm open to
suggestions on where to document this. Also bump the number of playback
channels up to 4.
MFC after: 3 days
2001-10-14 19:22:51 +00:00
Orion Hodson
9b6a5708db
use pcm_getbuffersize()
2001-10-10 17:56:35 +00:00
Scott Long
baadfb4c1e
Update to using the pcm_getbuffersize() method.
...
Fix an off-by-one error in the saving of the dsp memory.
Up the play channels to 2.
MFC after: 3 days
2001-10-09 19:46:09 +00:00
Cameron Grant
a791cfee44
use pcm_getbuffersize()
...
only creat a mic recording channel if the codec supports it
2001-10-08 06:10:39 +00:00
Cameron Grant
50388172c5
use pcm_getbuffersize()
...
use seperate dma tags for buffers and control info
2001-10-08 06:01:13 +00:00
Cameron Grant
39dbd126c7
use pcm_getbuffersize()
2001-10-08 05:59:54 +00:00
Cameron Grant
82ab7a3bc2
* register the correct number of channels
...
* include hw buffer size in sndstat info
2001-10-07 23:31:52 +00:00
Cameron Grant
a9d2ee22ac
use mixer channel numbers, not channel masks- this should fix sb/sbpro mixer
...
problems.
2001-10-07 23:28:34 +00:00
George C A Reid
8c65132c76
Add another pnpid for the AWE64
...
PR: 30909
Submitted by: Kinji Itoh <kinji-i@gray.plala.or.jp>
MFC after: 7 days
2001-09-29 12:38:58 +00:00
Cameron Grant
11149a9ac8
release isa dma channels on unload.
2001-09-29 08:01:42 +00:00
Cameron Grant
374e1c5baa
allow the hardware buffer size to be controlled with hints
...
release isa dma channels on unload (ad1816, ess, sb8)
2001-09-29 07:57:07 +00:00
John Baldwin
ed01445d8f
Use the passed in thread to selrecord() instead of curthread.
2001-09-21 22:46:54 +00:00
Cameron Grant
a6295c60ae
when setting blocksize, fix blockcount to 2 to reduce latency with smaller
...
block sizes.
2001-09-18 15:19:44 +00:00
Cameron Grant
c2995ba2d4
make buffer size adjustable.
2001-09-18 15:12:35 +00:00
Cameron Grant
fca71897c4
don't enable the mic record channel unless the codec supports it.
...
allow hardware buffer size to be specified using hints.
2001-09-18 14:53:01 +00:00
Cameron Grant
a67fe5c1d6
change tracking of channel counts.
...
add method for retrieving "buffersize" hints for pcm devices, adjusted for
specified minimum, maximum and default values.
2001-09-18 14:50:52 +00:00
Cameron Grant
a3a1ce3024
add a tunable/sysctl, hw.snd.targetirqrate, to modify the default target
...
irq rate for apps that do not set a blocksize.
2001-09-18 14:45:09 +00:00
Cameron Grant
5d91ad679d
add a method for retrieving codec capabilities
2001-09-18 14:34:59 +00:00