Commit Graph

190012 Commits

Author SHA1 Message Date
Allan Jude
ecd9567c1a Improve sysctl descriptions for new ZFS sysctls:
vfs.zfs.dirty_data_max
vfs.zfs.dirty_data_max_max
vfs.zfs.dirty_data_sync

Reviewed by:	smh
Approved by:	wblock (mentor)
2014-05-22 05:30:38 +00:00
Justin Hibbits
81e3caaf77 imagact_binmisc builds for all supported architectures, so enable it for all.
Any bugs in execution will be dealt with as they crop up.

MFC after:	3 weeks
Relnotes:	Yes
2014-05-22 05:04:40 +00:00
Gregory Neil Shapiro
377456f91e Note merge to head for sendmail 8.14.9.
MFC after:	3 days
2014-05-22 04:46:51 +00:00
Gregory Neil Shapiro
8e0e5c51b7 Minor changes to force commit these files so new freebsd*.cf files are
built to use the new sendmail-8.14.9/cf tree.

MFC after:	3 days
2014-05-22 04:43:40 +00:00
Gregory Neil Shapiro
10b240b765 Update for sendmail 8.14.9 import
MFC after:	3 days
2014-05-22 04:41:11 +00:00
Gregory Neil Shapiro
4313cc8344 Merge sendmail 8.14.9 to HEAD
MFC after:	3 days
2014-05-22 04:39:17 +00:00
Gregory Neil Shapiro
4a67213fda Import sendmail 8.14.9 2014-05-22 03:45:17 +00:00
Neel Natu
fd949af642 Inject page fault into the guest if the page table walker detects an invalid
translation for the guest linear address.
2014-05-22 03:14:54 +00:00
Xin LI
f3ce69748f Explicitly link libzfs against libavl as it is done in OpenSolaris
(4543:12bb2876a62e).  Without this, some third party applications
may break because the lack of AVL related symbols.

FreeBSD base system are not affected because the FreeBSD ZFS command
line tools were all linked against libavl and thus hide the underlying
issue.

PR:		java/183081
Tested by:	jkim
MFC after:	3 days
2014-05-22 00:01:31 +00:00
Sean Bruno
44681eacf6 Remove duplicate:
option		AH_DEBUG_ALQ
2014-05-21 21:30:00 +00:00
Hans Petter Selasky
76e6b1ab4a "%p" formatting already includes "0x" prefix in printout. 2014-05-21 18:02:19 +00:00
Marcel Moolenaar
762ff43901 Fix CID 1204379 (vtoc8.c) & CID 1204380 (bsd.c): Cast ncyls to lba_t
before multiplying the 32-bit integrals to avoid any possibility of
truncation before widening. Not a likely scenario to begin with...
2014-05-21 17:39:49 +00:00
Marcel Moolenaar
adc991ea42 Fix CID 1204394: Use strncpy(3) instead of strcpy(3). Note that it's
ok to not have the name and type strings terminated.
2014-05-21 17:38:56 +00:00
Marcel Moolenaar
645c72194e Fix CID 1215124: Handle errors properly. 2014-05-21 17:38:14 +00:00
Marcel Moolenaar
a513818762 Fix CID 1215125: fstat(2) returns -1 on error and sets errno. It does
not return the error (oops).
2014-05-21 17:37:22 +00:00
Marcel Moolenaar
9746454f54 Fix CID 1215128: Free the allocated buf when image_set_size()
returns and error and we return from bsd_write().
2014-05-21 17:36:12 +00:00
Marcel Moolenaar
bce9a24a0e Fix CID 1215129: move the call to lseek(2) before the call to malloc(3)
so that the error path (taken due to lseek(2) failing) isn't leaking
memory.
2014-05-21 17:34:50 +00:00
Hans Petter Selasky
8e14e4a03a Implement interrupt endpoint methods for host mode transfers.
Sponsored by:	DARPA, AFRL
2014-05-21 17:22:41 +00:00
Hans Petter Selasky
400b4e53bd - Split transmit queue into one for each type. Apparently there will
be a race when using a single active queue for all transmit types.
- Last argument of usb_pause_mtx() is ticks and not milliseconds.
- Remove unused watchdog.
- Remove some unused fields from the RSU softc structure.
- Workaround usbd_transfer_start() recursion from inside of completion
callback.

MFC after:	3 days
2014-05-21 16:52:55 +00:00
Steven Hartland
df23182a62 Added sysctls / tunables for ZFS dirty data tuning
Added the following new sysctls / tunables:
* vfs.zfs.dirty_data_max
* vfs.zfs.dirty_data_max_max
* vfs.zfs.dirty_data_max_percent
* vfs.zfs.dirty_data_sync
* vfs.zfs.delay_min_dirty_percent
* vfs.zfs.delay_scale

PR:		kern/189865
MFC after:	2 weeks
2014-05-21 13:36:04 +00:00
Aleksandr Rybalko
0cc7a38567 Sync lock(1) on VT_LOCKSWITCH usage with syscons(4), vt(4) and vidcontrol(1).
Sponsored by:	The FreeBSD Foundation
2014-05-21 11:53:15 +00:00
Aleksandr Rybalko
7ee92f6e08 Fix tty locking.
o Correct expected values for VT_LOCKSWITCH ioctl.
o Check current window for locked state.

Sponsored by:	The FreeBSD Foundation
2014-05-21 11:15:38 +00:00
Hiroki Sato
c4f55e08be - Fix a bug which can make sysctl() fail when -F is specified.
- Increase WID_IF_DEFAULT() from 6 to 8 (the default for AF_INET6) because
  we have interfaces with longer names than 6 chars like epairN{a,b}.
- Style fixes.
2014-05-21 10:04:51 +00:00
Hans Petter Selasky
c13c64fa63 - Replace some constants with macros.
- Need to set the pre-fetch memory address when reading the host memory.
- We currently assume that no endianness conversion is needed.

Sponsored by:	DARPA, AFRL
2014-05-21 09:26:02 +00:00
Konstantin Belousov
2602a2ea88 Remove redundand loop. The inner goto restarts the whole page
handling in the situation identical to the loop condition.

Sponsored by:	The FreeBSD Foundation
MFC after:	3 days
2014-05-21 08:19:04 +00:00
Kevin Lo
61c067adc3 - Configure Rx bulk
- Announce flow control capability to PHY drivers
2014-05-21 08:09:44 +00:00
Hans Petter Selasky
302a703b5b Avoid starting a USB transfer inside the callback function, right
after its been submitted.

MFC after:	3 days
2014-05-21 06:23:52 +00:00
Dmitry Morozovsky
cb2bb2deb1 Document VMware-related filesystems additions.
Reviewed by:    jmg
MFC after:      1 week
2014-05-21 05:27:57 +00:00
Benjamin Kaduk
bf09eca2cb Check for mismatched vref()/vdrop()
Assert that the hold count has not fallen below the use count, a situation
that would only happen when a vref() (or similar) is erroneously paired
with a vdrop().  This situation has not been observed in the wild, but
could be helpful for someone implementing a new filesystem.

Reviewed by:	kib
Approved by:	hrs (mentor)
2014-05-21 03:11:27 +00:00
Scott Long
96d67b46df Old PCIe implementations cannot allow a DMA transfer to cross a 4GB
boundary.  This was addressed several years ago by creating a parent
tag hierarchy for the root buses that set the boundary restriction
for appropriate buses and allowed child deviced to inherit it.
Somewhere along the way, this restriction was turned into a case for
marking the tag as a candidate for needing bounce buffers, instead
of just splitting the segment along the boundary line.  This flag
also causes all maps associated with this tag to be non-NULL, which
in turn causes bus_dmamap_sync() to take the slow path of function
pointer indirection to discover that there's no bouncing work to
do.  The end result is a lot of pages set aside in bounce pools
that will never be used, and a slow path for data buffers in nearly
every DMA-capable PCIe device.  For example, our workload at Netflix
was spending nearly 1% of all CPU time going through this slow path.

Fix this problem by being more selective about when to set the
COULD_BOUNCE flag.  Only set it when the boundary restriction
exists and the consumer cannot do more than a single DMA segment
at once.  This fixes the case of dynamic buffers (mbufs, bio's)
but doesn't address static buffers allocated from bus_dmamem_alloc().
That case will be addressed in the future.

For those interested, this was discovered thanks to Dtrace Flame
Graphs.

Discussed with: jhb, kib
Obtained from:	Netflix, Inc.
MFC after:	3 days
2014-05-20 22:43:17 +00:00
Stephen McConnell
33f50a0985 - Add myself to committers-src.dot
Approved by:	ken/scottl (mentors)
2014-05-20 22:11:52 +00:00
Sergey Kandaurov
bf5eb95e2c Move Nx definition to a separate block.
Noticed by:	ru (a while ago)
2014-05-20 21:24:15 +00:00
Neel Natu
f888763dd8 Add PG_RW check when translating a guest linear to guest physical address.
Set the accessed and dirty bits in the page table entry. If it fails then
restart the page table walk from the beginning. This might happen if another
vcpu modifies the page tables simultaneously.

Reviewed by:	alc, kib
2014-05-20 20:30:28 +00:00
Eygene Ryabinkin
6306643dfa Fix warning messages after r252015
$alias used to hold alias number, but now it carries full variable name,
so messages were tuned to account for that.

Other fixes:
 - eliminate unneeded double spaces;
 - tell user where inet/inet6 keywords are expected to be.
Reviewed by:	hrs
MFC after:	1 week
2014-05-20 19:55:59 +00:00
Jim Harris
0572ccaa45 Add ismt(4) driver.
ismt(4) supports the SMBus Message Transport controller found on Intel
C2000 series (Avoton) and S1200 series (Briarwood) Atom SoCs.

Sponsored by:	Intel
2014-05-20 19:55:06 +00:00
Simon J. Gerraty
d94068ba0d Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.

Reviewed by:	imp
2014-05-20 18:25:46 +00:00
Hans Petter Selasky
aff6e94558 - The DELAY() should not be used in USB drivers.
- The usb_pause_mtx() function takes ticks and not milliseconds as last argument.

MFC after:	3 days
2014-05-20 15:53:17 +00:00
Hans Petter Selasky
b41381aea9 - The DELAY() should not be used in USB drivers.
- The usb_pause_mtx() function takes ticks and not milliseconds as last argument.

MFC after:	3 days
2014-05-20 15:47:37 +00:00
Hans Petter Selasky
5c657683bb Optimise reading of pending interrupt registers. If there are no
pending interrupt bits, skip the bit iteration loop.

Reviewed by:	ian @
2014-05-20 15:03:23 +00:00
Alexander Motin
e887c1dedf Add IOMMU PCI subclass, found on Tyan S8236 motherboard.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	2 weeks
2014-05-20 14:39:22 +00:00
Hans Petter Selasky
6804df87a9 Correct some programming details. The layout of the PDTs were
different from what was initially thought. Fix re-programming of
hardware mode register after reset.

Sponsored by:	DARPA, AFRL
2014-05-20 14:15:03 +00:00
Hans Petter Selasky
7243077c9d Make sure detach code is executed in all cases. This fixes a panic
when debugging is enabled.

Reported by:	Idwer Vollering <vidwer@gmail.com>
MFC after:	3 days
2014-05-20 12:22:53 +00:00
Steven Hartland
4b0b2f2d1b Change comment about HPNDisabled to match the style of other options to
avoid confusion.

Sponsored by:	Multiplay
2014-05-20 10:28:19 +00:00
Konstantin Belousov
7032434e98 When exec_new_vmspace() decides that current vmspace cannot be reused
on execve(2), it calls vmspace_exec(), which frees the current
vmspace.  The thread executing an exec syscall gets new vmspace
assigned, and old vmspace is freed if only referenced by the current
process.  The free operation includes pmap_release(), which
de-constructs the paging structures used by hardware.

If the calling process is multithreaded, other threads are suspended
in the thread_suspend_check(), and need to be unsuspended and run to
be able to exit on successfull exec.  Now, since the old vmspace is
destroyed, paging structures are invalid, threads are resumed on the
non-existent pmaps (page tables), which leads to triple fault on x86.

To fix, postpone the free of old vmspace until the threads are resumed
and exited.  To avoid modifications to all image activators all of
which use exec_new_vmspace(), memoize the current (old) vmspace in
kern_execve(), and notify it about the need to call vmspace_free()
with a thread-private flag TDP_EXECVMSPC.

http://bugs.debian.org/743141

Reported by:	Ivo De Decker <ivo.dedecker@ugent.be> through secteam
Sponsored by:	The FreeBSD Foundation
MFC after:	3 days
2014-05-20 09:19:35 +00:00
Bryan Drewery
b39df8fe2d - Include /etc/newsyslog.conf.d/* and /usr/local/etc/newsyslog.conf.d/* by
default for newsyslog(8).

  The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
  install a default configuration to handle their own log files.

MFC after:	2 weeks
Relnotes:	yes
2014-05-20 03:00:20 +00:00
Peter Grehan
6902364468 Bump bhyve allocation up to 20 bits to avoid
birthday-paradox style address collisions when
bhyve VMs are connected to the same broadcoast
domain and are using pseudo-random allocations.

Reviewed by:	gnn
MFC after:	1 week
2014-05-20 02:59:13 +00:00
Simon J. Gerraty
a14f4e2fc1 Revert previous change - doesn't cover all cases. 2014-05-19 21:55:47 +00:00
Mark Johnston
a69a8c422a Fix tst.ZeroModuleProbes.d.ksh, which was incorrectly modified in r178534.
Since "BEGIN" is not the name of a module, the test would just hang.

MFC after:	3 days
2014-05-19 20:11:55 +00:00
Adrian Chadd
b2bdb24900 Let's just use the mib0 partition for our configurations pace. It's
a convenient thing.

tested:

* AP93
2014-05-19 19:34:44 +00:00
Simon J. Gerraty
2cf7eab64a _SUBDIR is marked .MAKE - since it runs a sub-make.
Targets thus marked are supposed to run even with -n.
As such they should not do anything except run the sub-make.

Use an intermediate target _* to associate with _SUBDIR and which
depends on installincludes etc so that we get the correct behavior with -n.

Reviewed by:	marcel
2014-05-19 19:08:46 +00:00