This was announced to happen after the 12 relases.
Remove a depeciated ABI.
The complete removal is for HEAD only. I'll remove the #define in
stable/13 as MFC, so the code will still exist in 13.x, but will not
included by default. Earlier versions will not be affected.
Reviewed by: kp
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28518
Previously the flags were passed as-is, which could resulted
in spurious EAGAIN returned for non-blocking sockets, which
broke some Steam games.
PR: 248065
Reported By: Alex S <iwtcex@gmail.com>
Tested By: Alex S <iwtcex@gmail.com>
Reviewed By: emaste
MFC After: 3 days
Sponsored By: The FreeBSD Foundation
This is the first patch of a series of necessary steps
to make ng_bridge(4) multithreaded.
Reviewed by: melifaro (network), afedorov
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D28125
Handling of unknown MACs on an bridge with incomplete learning
capabilites (aka uplink ports) can be defined in different ways.
The classical approach is to broadcast unicast frames send to an
unknown MAC, because the unknown devices can be everywhere. This mode
is default for ng_bridge(4).
In the case of dedicated uplink ports, which prohibit learning of MAC
addresses in order to save memory and CPU cycles, the broadcast
approach is dangerous. All traffic to the uplink port is broadcasted
to every downlink port, too. In this case, it's better to restrict the
distribution of frames to unknown MAC to the uplink ports only.
In order to keep the chance small and the handling as natural as
possible, the first attached link is used to determine the behaviour
of the bridge: If it is an "uplink" port, then the bridge switch from
classical mode to restricted mode.
Reviewed By: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28487
The ng_bridge(4) node is designed to work in moderately small
environments. Connecting such a node to a larger network rapidly fills
the MAC table for no reason. It even become complicated to obtain data
from the gettable message, because the result is too large to
transmit.
This patch introduces, two new functionality bits on the hooks:
- Allow or disallow MAC address learning for incoming patckets.
- Allow or disallow sending unknown MACs through this hook.
Uplinks are characterized by denied learing while sending out
unknowns. Normal links are charaterized by allowed learning and
sending out unknowns.
Reviewed by: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23963
The ipfilter NAT table host map size is a tunable that defaults to
a macro value defined at build time. HOSTMAP_SIZE is saved in softn
(the ipnat softc) at initialization. It can be tuned (changed) at runtime
using the ipf -T command. If the hostmap_size tunable is adjusted the
calculation to determine where to put new entries in the table was
incorrect. Use the tunable in the NAT softc instead of the static build
time value.
MFC after: 1 week
lang/rust needs COMPAT_FREEBSD11 to build, even though powerpc64le itself is supported only since 13.0.
I also corrected a comment, because if we ever have lib32 for powerpc64le, it will be for powerpcle.
Reviewed by: bdragon (on IRC)
Examples of inconsistencies with the current state:
- references LRU of all entries, removed years ago
- references a non-existent lock (neglist)
- claims negative entries have a NULL target
It will be replaced with a more accurate and more informative
description.
In the meantime take it out so it stops misleading.
update mrsas(4) since big-endian is supported since
e34a057ca6
Reviewed by: bdragon, gbe
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28475
The 'reldoc' target includes release-related documentation on
installation medium. Since the switch from XML to ASCIIDoctor,
the file locations have moved, and it will take some time to sort
out how this target should work now.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
This is a handy script for creating and updating Differential revisions
from git commits. It tries to avoid forcing the user to manage their
git tree in any particular way, but makes two major assumptions:
- there is a one-to-one mapping between git commits and Differential
revisions,
- the title of a Differential revision is the same as the summary line
of the corresponding commit.
A verbose description of the script's functionality is provided in its
usage message, which should probably be converted to a man page.
A description of workflows using git-arc is here:
https://lists.freebsd.org/pipermail/freebsd-hackers/2021-January/056979.html
There are some loose ends but this is functional enough to be useful.
Discussed with: jhb
Differential Revision: https://reviews.freebsd.org/D28334
On arm64 we can select how strongly we order device memory. Currently
we use the strongest type of non-Gathering, non-Reordering, no Early
write acknowledgement. This is equivalent to VM_MEMATTR_SO in the 32-bit
arm code.
Create a new memory type to remove the no Early write acknowledgement
option to create a memory attribute that is equivalent to the arm
VM_MEMATTR_DEVICE.
Keep the the old nGnRnE memory as what we provide for VM_MEMATTR_DEVICE
until we can test nGnRE on more hardware. A method for dynamically
switching back may be needed as at least one vendor is known to have
broken nGnRE memory.
Sponsored by: Innovate UK
The null pattern semantics were terrible because I tried to match gnugrep,
but I got it wrong. Let's unwind that:
- The null pattern should match every line if neither -w nor -x.
- The null pattern should match empty lines if -x.
- The null pattern should not match any lines if -w.
The first two will stop processing (shortcut) even if additional patterns
are specified. In any other case, we will continue processing other
patterns. If no other patterns are specified beside a null pattern, then
we match if neither -w nor -x or set and do not match if either of those
are specified.
The justification for -w is that it should match on a whole word, but the
null pattern deos not have a whole word to match on.
Empty pattern files should never match anything, and more importantly, -v
should cause everything to be written.
PR: 253209
MFC-after: 4 days
FreeBSD pvscsi and vmx work with VMware ESXi Arm "Fling"; provide these
in GENERIC for a convenient out-of-the-box experience.
PR: 253202
Reported by: Vincent Milum Jr
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
X700 family of controllers has limited number of available VLAN
HW filters. Driver did not handle properly a case when user
assigned more VLANs to the interface which had all filters
already in use. Fix that by disabling HW filtering when
it is impossible to create filters for all requested VLANs.
Keep track of registered VLANs using bitstring to be able
to re-enable HW filtering when number of requested VLANs
drops below the limit.
Also switch all allocations to use M_IXL malloc type
to ease detecting memory leaks in the driver.
Reviewed by: erj
Tested by: gowtham.kumar.ks@intel.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28137
Conout does contian the default output device name.
ConOutDev does contain all possible output device names, so we can
use it as fallback, when there is no ConOut.
PR: 253253
When OFED was upgraded to Linux v4.9, a bunch of Linux-specific
netlink changes were dropped. Unfortunately, there was a mismerge
in this process and as a result ib_sa_cancel_query() would fail to
cancel an outstanding MAD.
This was causing rdma_destroy_id() to hang indefinitely waiting
for the MAD to complete and release the final reference.
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D28421
Reviewed by: hselasky, kib
MFC after: 2 months
Consider the following scenario:
1. A delayed_work struct in the WORK_ST_TIMER state.
2. Thread A calls mod_delayed_work()
3. Thread B (a callout thread) simultaneously calls
linux_delayed_work_timer_fn()
The following sequence of events is possible:
A: Call linux_cancel_delayed_work()
A: Change state from TIMER TO CANCEL
B: Change state from CANCEL to TASK
B: taskqueue_enqueue() the task
A: taskqueue_cancel() the task
A: Call linux_queue_delayed_work_on(). This is a no-op because the
state is WORK_ST_TASK.
As a result, the delayed_work struct will never be invoked. This is
causing address resolution in ib_addr.c to stop permanently, as it
never tries to reschedule a task that it thinks is already scheduled.
Fix this by introducing locking into the cancel path (which
corresponds with the lock held while the callout runs). This will
prevent the callout from changing the state of the task until the
cancel is complete, preventing the race.
Differential Revision: https://reviews.freebsd.org/D28420
Reviewed by: hselasky
MFC after: 2 months
These tests create jails with the same name, so they cannot be run in
parallel.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28482
The output now contains http-alt instead of 8080 and personal-agent
instead of 5555.
This was probably caused by 228e2087a3.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D28481
This includes improvements to the atf-sh helper functions that
significantly reduce the number of spawned processes for each test
and therefore speeds up running the testsuite noticeably.
OpenSSL BIO classes provide an abstraction for dealing with I/O.
OpenSSL provides BIO classes for commonly used I/O primitives backed
by file descriptors, sockets, etc. as well as permitting consumers
of OpenSSL to define custom BIO classes.
One of the methods BIO classes implement is a control method invoked
by BIO_ctrl() for various ancilliary tasks somewhat analgous to
fcntl() and ioctl() on file descriptors. According to the BIO_ctrl(3)
manual page, control methods should return 0 for unknown control
requests.
KTLS support in OpenSSL adds new control requests. Two of those new
requests are queries to determine if KTLS is enabled for either
reading or writing. These control reuquest return 1 if KTLS is
enabled and 0 if it is not.
serf includes two custom BIO classes for wrapping I/O requests from
files and from a buffer in memory. These BIO classes both use a
custom control method. However, this custom control method was
returning 1 for unknown or unsupported control requests instead of 0.
As a result, OpenSSL with KTLS believed that these BIOs were using
KTLS and were thus adding headers and doing encryption/decryption in
the BIO. Correcting the return value removes this confusion.
PR: 253135
Reported by: Guido Falsi <mad@madpilot.net>
Reviewed by: emaste
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28472
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
Add endiannes conversions in order to support big-endian platforms
Submitted by: Andre Fernando da Silva <andre.silva@eldorado.org.br>
Reviewed by: luporl, alfredo, kadesai (on email)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26531
If a M_WAITOK contig alloc fails, the VM subsystem will try to
reclaim contiguous memory twice before actually failing the
request. On a system with 64GB of RAM I've observed this take
400-500ms before it finally gives up, and I believe that this
will only be worse on systems with even more memory.
In certain contexts this delay is extremely harmful, so add a flag
that will skip reclaim for allocation requests to allow those
paths to opt-out of doing an expensive reclaim.
Sponsored by: Dell Inc
Differential Revision: https://reviews.freebsd.org/D28422
Reviewed by: markj, kib
- limit maximum segment size to 2048 bytes. Although dwmmc supports a buffer
fragment with a maximum length of 4095 bytes, use the nearest lower power
of two as the maximum fragment size. Otherwise, busdma create excessive
buffer fragments.
- fix off by one error in computation of the maximum data transfer length.
- in addition, reserve two DMA descriptors that can be used by busdma
bouncing. The beginning or end of the buffer can be misaligned.
- Don’t ignore errors passed to bus_dmamap_load() callback function.
- In theory, a DMA engine may be running at time when next dma descriptor is
constructed. Create a full DMA descriptor before OWN bit is set.
MFC after: 2 weeks
The lock around callout_drain() is unnecessary and may cause
deadlock when one closes a timer descriptor during timer execution.
Reviewed By: delphij
Submitted By: ankohuu_outlook.com (Shunchao Hu)
Differential Revision: https://reviews.freebsd.org/D28148
This reverts commit 710e45c4b8.
It breaks for some corner cases on big endian ppc64.
Given the stage of the release process it is best to revert for now.
Reported by: jhibbits
On Linux, read(2) from a timerfd file descriptor returns an unsigned
8-byte integer (uint64_t) containing the number of expirations
that have occurred, if the timer has already expired one or more
times since its settings were last modified using timerfd_settime(),
or since the last successful read(2). That's to say, once we do
a read or call timerfd_settime(), timer fd's expiration count should
be zero. Some Linux applications create timerfd and add it to epoll
with LT mode, when event comes, they do timerfd_settime instead
of read to stop event source from trigger. On FreeBSD,
timerfd_settime(2) didn't set the count to zero, which caused high
CPU utilization.
Submitted by: ankohuu_outlook.com (Shunchao Hu)
Differential Revision: https://reviews.freebsd.org/D28231
