LinuxKPI. Fix a few spaces to tabs. Bump the FreeBSD version to force
recompilation of existing KMODs.
MFC after: 1 week
Sponsored by: Mellanox Technologies
* Use standard IPv6 SAS instead of rt->rt_ifa address.
* Make address lookup work for IPv6 LLA.
* Save address into buffer provided by caller instead of using static vars.
Discussed with: rmacklem
Not per PF copies as on Huntington.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4935
This builds on the modular EFI loader support added r294060 adding a
module to provide ZFS boot support on EFI systems.
It should be noted that EFI uses a fixed size memory block for all
allocations performed by the loader so it may be necessary to tune this
size.
For example when building an image which uses mfs_root e.g. mfsbsd, adding
the following to /etc/make.conf would be needed to prevent EFI from running
out of memory when loading the mfs_root image.
EFI_STAGING_SIZE=128
Submitted by: Eric McCorkle
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Some classes of IOAT hardware prefetch reads. DMA operations that
depend on the result of prior DMA operations must use the DMA_FENCE flag
to prevent stale reads.
(E.g., I've hit this personally on Broadwell-EP. The Broadwell-DE has a
different IOAT unit that is documented to not pipeline DMA operations.)
Sponsored by: EMC / Isilon Storage Division
Make EFI boot loader modular in preparation for adding ZFS support.
This is a partial commit of the D4515.
Submitted by: Eric McCorkle
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4515
The boot code fsread was caching the result of meta data request and
reusing it even for calls with inode = 0, which is used to partitions
trigger a probe.
The result was that success was incorrectly returned for all partition
probes after the first valid success, even for partitions which are not
UFS.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Fix compiler warnings about dropping const qualifier by changing file_loadraw
name param to const, and updating method to make that the case (it was
abusing the variable).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
VM_MAX_KERNEL_ADDERESS is the maximum KVA address. 0xf8000000 is the start of
device mapping space. Since several conditional checks use '<=' against
VM_MAX_KERNEL_ADDRESS, bad things could feasibly happen.
Silence a bogus compiler warning about indexing past the end of dn_bonus.
The ZFS code ensures this is not possible but the compiler can't determine
this so added an additional check to prevent this warning.
Sponsored by: Multiplay
It hasn't been used since the AIO code was made MPSAFE 10 years ago.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4946
- Remove unneeded fstat()/lseek() calls.
- Return NULL and set errno to EINVAL on negative length.
- Fix small style problems and expand variable names.
After this change, it is possible to use this code for some irregular
files. For example, 'md5 /dev/md0' should now succeed.
Differential Revision: https://reviews.freebsd.org/D4748
Suggested by: bde
Reviewed by: bde, allanjude, delphij
This taskqueue is not used to handle bio requests. It is only used to
run aio_kick_nowait() to spin up new aio daemon processes.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D4904
problem affects revision 1xx hardware as well as later versions. Also, the
recommended workaround is to set the PDC count register for a 12-byte
transfer when the actual size is less than that, but there is no need to
extend or zero-out the data buffer, because the blklen register contains
the real transfer size and only that many bytes will be transferred.
Also add a sysctl to turn debugging printfs on or off on the fly.
linking. These are too large for a branch instruction to branch from an
earlier point in the code to somewhere later.
This will also allow these to be build with Thumb-2 when we get this
infrastructure.
Reviewed by: dim
Differential Revision: https://reviews.freebsd.org/D4855
As the in-tree GCC does not support __attribute__((ms_abi)) EFI can only
be built with Clang.
The EFI loader and boot1 validated this, but unused libefi was still built
causing issues under GCC after warnings where enabled by r293724.
Disable building all of EFI when the selected compiler is GCC.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
When a ZFS drive disappears, ZFS sends a resource.fs.zfs.removed event to
userland. A userland program like zfsd(8) can use that event, for example to
activate a hotspare. The current code contains a race condition: vdev_geom
will sent the sysevent _before_ spa.c would update the vdev's status,
causing userland processes to see pool state that does not reflect the
device removal. This change moves the sysevent to spa.c, closing the race.
Reviewed by: delphij, Sean Eric Fagan
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4902
any root mount holds. The previous one used a wrong conditional - the
"err=$?" assignment resets "$?" to 0.
Submitted by: jilles@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
canonical place, and the nit-pickers are welcome to move this
information there with a cross reference.
Differential Review: https://reviews.freebsd.org/D4860
Netflow module is supposed to store (along with fields like
gateway address and interface index) matched netmask for each record.
This (currently) requires returning individual route entries, instead
of optimized next-hop structure. Given that, use control-plane
rib_lookup_info() function to avoid accessing rtentries directly.
While rib_lookup_info() might be slower, than fibX_lookup() flavours,
it is more scalable than rtalloc1_fib(), because rtentry mutex is
not acquired.
(RFC 2385/TCP-MD5) kernel option.
If a tcpcb has TF_NOOPT flag, then tcp_addoptions() is not called,
and to.to_signature is an uninitialized stack variable. The value
is later used as write offset, which leads to writing to random
address.
Submitted by: rstone, jtl
Security: SA-16:05.tcp
and replace crcopysafe by crcopy as crcopysafe is is not intended to be
safe in a threaded environment, it drops PROC_LOCK() in while() that
can lead to unexpected results, such as overwrite kernel memory.
In my POV crcopysafe() needs special attention. For now I do not see
any problems with this function, but who knows.
Submitted by: dchagin
Found by: trinity
Security: SA-16:04.linux
The set_robust_list system call request the kernel to record the head
of the list of robust futexes owned by the calling thread. The head
argument is the list head to record.
The get_robust_list system call should return the head of the robust
list of the thread whose thread id is specified in pid argument.
The list head should be stored in the location pointed to by head
argument.
In contrast, our implemenattion of get_robust_list system call copies
the known portion of memory pointed by recorded in set_robust_list
system call pointer to the head of the robust list to the location
pointed by head argument.
So, it is possible for a local attacker to read portions of kernel
memory, which may result in a privilege escalation.
Submitted by: mjg
Security: SA-16:03.linux
The sctp6_ctlinput() function does not properly check the length of the packet
it receives from the ICMP6 input routine. This means that an attacker can craft
a packet that will cause a kernel panic.
When the kernel receives an ICMP6 error message with one of the types/codes
it handles, it calls icmp6_notify_error() to deliver it to the upper-level
protocol. icmp6_notify_error() cycles through the extension headers (if any)
to find the protocol number of the first non-extension header. It does NOT
verify the length of the non-extension header.
It passes information about the packet (including the actual packet) to the
upper-level protocol's pr_ctlinput function. In the case of SCTP for IPv6,
icmp6_notify_error() calls sctp6_ctlinput().
sctp6_ctlinput() assumes that the incoming packet contains a sufficiently-long
SCTP header and calls m_copydata() to extract a copy of that header. In turn,
m_copydata() assumes that the caller has already verified that the offset and
length parameters are correct. If they are incorrect, it will dereference a
NULL pointer and cause a kernel panic.
In short, no one is sufficiently verifying the input, and the result is a
kernel panic.
Submitted by: jtl
Security: SA-16:01.sctp
Allow user-specified warning flag overrides for specific files under
bsd.sys.mk, in the same way kern.mk does.
This will to be used by future commits.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
