GCC warns about the mismatched sizes on i386 where vm_paddr_t is 64
bits.
Reviewed by: imp, markj
Differential Revision: https://reviews.freebsd.org/D36750
This matches the return type of pmap_mapdev/bios.
Reviewed by: kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36548
With clang 15, the following -Werror warnings is produced:
sys/dev/fb/fbd.c:205:9: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
fbd_list()
^
void
This is because fbd_list() is declared with a (void) argument list, but
defined with an empty argument list. Make the definition match the
declaration.
MFC after: 3 days
fb_getinfo is badly designed as it returns either the
info if the driver have the method or ENXIO via the kobj stuff
if the driver doesn't have it.
Add a default method that returns NULL as the code already checks this
and it avoid changing the interface.
None of the drm drivers supported have this method and it sometimes
fails and panic when loading them (for now only usb-c docks seems to be
affected).
MFC after: 3 days
Sponsored by: Beckhoff Automation GmbH & Co. KG
This option was never enabled in GENERIC and does not appear to work
(the cdevsw is stored in a global array but never passed to make_dev
to be associated with a character device).
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35008
6d1699583d added the FBIOGXINFO,FBIOMONINFO and FBIOPUTCMAPI/FBIOGETCMAPI
ioctls and said that implementation in driver will come later.
Since it was in 2001 I think we can remove this.
Reviewed by: emaste, imp, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33218
Differential Revision: https://reviews.freebsd.org/D33219
Differential Revision: https://reviews.freebsd.org/D33220
The cursors related ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33217
Commit 6d1699583d added the FBIOVERTICAL ioctl and said that implementation
in driver will come later.
Since it was in 2001 I think we can remove this.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
The FBIOSVIDEO/FBIOGVIDEO ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33216
The FBIOSATTR/FBIOGATTR ioctls were added in 1994 with the 4.4 Lite import
but were never implemented in either sc(4), fb(4) or vt(4).
Remove it.
Reviewed by: emaste, tsoome
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33215
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).
Sponsored by: The FreeBSD Foundation
vm_ooffset_t is now unsigned. Remove some tests for negative values,
or make other adjustments accordingly.
Reported by: Coverity
Reviewed by: kib markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26214
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Note that KVA mapping of the framebuffer already uses write-combining
mode, so the change, besides improving speed of user mode writes, also
satisfies requirement of the IA32 architecture of using consistent
caching modes for multiple mappings of the same page.
Reported and tested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
9 wide.
I only need this to improve the mouse cursor, but it has always been
needed to select and/or adjust fonts.
This is complicated because there are no standard parameter tables
giving this bit of information directly, and the device register bit
giving the information can't be trusted even if it is read from the
hardware. Use a heuristic to guess if the device register can be
trusted. (The device register is normally read from the BIOS mode
table, but on my system where the device register is wrong, the mode
table doesn't match the hardware and is not used; the device registers
are used in this case.)
of our tweaked modes based on it. In practice, this means limiting the
tweaked modes to at most 80x50 based on 80x25, so there are no 90-column,
80x30 or 80x60 modes.
This happens when the the initial mode is is not in the parameter
table. We always detected this case, but assumed that the (necessarily
nonstandard) parameters of the initial mode could be tweaked just as
blindly as the probably-standard parameters of initial modes in the
table.
On 1 laptop system with near-VGA where the initial mode is nonstandard,
this is because the hardware apparently doesn't support 9-bit mode,
but otherwise has standard timing. The initial mode has 8-bit mode
CRTC horizontal parameters similar to those in syscons' 90-column modes
and in EGA modes. Tweaking these values for the 90-column modes has
little effect except to print the extra 10 columns off the screen.
Tweaking from 80x25 to 80x30 requires changing from 400 scan lines to
480. This can probably be made to work, but syscons blindly applies
values based on standard timing. This gives blank output. Tweaking
from 80x25 to 80x50 doesn't change the CRTC timing and works.
mode. This works around bugs in at least 2 Intel BIOSes for our
subsequent setting of the DAC back to 8-bit mode. The bug caused dark
(mostly 1/4-intensity) colors for all except the first setting to a
VESA graphics mode (including for settings to the current mode).
Remove restoration (with less bits) of the palette in vesa_unload()
after resetting the DAC to 6-bit mode. Depend on the BIOS to keep
the palette consistent with the DAC for the simpler reset case like
we do everywhere else in places that are actually important.
Setting the video mode should reset everything to defaults, although
we usually don't want that. Even the buggy BIOSes set the DAC to the
default 6-bit mode, and set the palette to a default that matches the
DAC. We don't undo the reset for most things, but we do undo it for
the DAC (more precisely, we change to an 8-bit DAC if possible, and
this is the only way that we set to an 8-bit DAC; it is accidental
that if the DAC was in 8-bit mode from a previous mode switch then
setting it to 8-bit mode is an undo). The buggy BIOSes are confused
by our setting of the DAC to 8-bit mode in the "undo" case. They
should multiply palette entries by 4 to match, but they actually leave
all palette entries except #2 (green) and #248-255 (unused) untouched.
Green is mysteriously scaled from 0x2a to 0x6a, and #248-255 are scaled
correctly.
Our support for the 8-bit DAC had almost no effect except to enable
bugs. Syscons barely supports 16 colors, so it doesn't benefit much
from having a palette with 16 million colors instead of only 256K.
Applications can manage the palette using FBIO_{GET,SET}PALETTE, but
the palette managed by this is only used in the less interesting modes
(text and non-truecolor graphics modes up to 8 bits wide), and the
kernel loses the changes on any mode switch (including to another vt
in a different mode).
Newer VGAs don't support any mono modes, but bugs in the tables created
2 virtual mono modes (#45 90x43 and #112 80x43) that behaved more
strangely than crashing. 90-column modes are tweaked 80-column ones
and also fail to work on newer VGAs. #45 did crash (hang) on some
hardware.
On ARM if memattr is not overriden mmap(2) maps framebuffer
memory as WBWA which means part of changes to content in userland
end up in cache and appear on screen gradually as cache lines are
evicted. This change adds configurable memattr that hardware fb
implementation can set to get the memory mapping type it
requires:
- Add new flag FB_FLAG_MEMATTR that indicates that framebuffer
driver overrides default memattr
- Add new field fb_memattr to struct fb_info to specify requested
memattr
Reviewed by: ray
Differential Revision: https://reviews.freebsd.org/D8064
vesa_init_done isn't a reliable guard for the mutex init. If
vesa_configure() doesn't find valid VESA info it will not set
vesa_init_done, but the lock will remain initialized. Revert r303076
and use MTX_SYSINIT to deterministically init the lock.
Reviewed by: royger
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7290
Fix the following panic seen when migrating a FreeBSD guest on Xen:
panic: mtx_lock() of destroyed mutex @ /usr/src/sys/dev/fb/vesa.c:541
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe001d2fa4f0
vpanic() at vpanic+0x182/frame 0xfffffe001d2fa570
kassert_panic() at kassert_panic+0x126/frame 0xfffffe001d2fa5e0
__mtx_lock_flags() at __mtx_lock_flags+0x15b/frame 0xfffffe001d2fa630
vesa_bios_save_restore() at vesa_bios_save_restore+0x78/frame 0xfffffe001d2fa680
vga_suspend() at vga_suspend+0xa3/frame 0xfffffe001d2fa6b0
isavga_suspend() at isavga_suspend+0x1d/frame 0xfffffe001d2fa6d0
bus_generic_suspend_child() at bus_generic_suspend_child+0x44/frame
[...]
This is caused because vga_sub_configure (which is called if the VGA adapter
is attached after VESA tried to initialize), points to vesa_configure, which
doesn't initialize the VESA mutex. In order to fix it, make sure
vga_sub_configure points to vesa_load, so that all the needed vesa
components are properly initialized.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
PR: 209203
Reviewed by: dumbbell
Differential revision: https://reviews.freebsd.org/D7196
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.
The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
The main purpose of this feature is to be able to unload a KMS driver.
When going back from the current vt(4) backend to the previous backend,
the previous backend is reinitialized with the special VDF_DOWNGRADE
flag set. Then the current driver is terminated with the new "vd_fini"
callback.
In the case of vt_fb and vt_vga, this allows the former to pass the
vgapci device vt_fb used to vt_vga so the device can be rePOSTed.
Differential Revision: https://reviews.freebsd.org/D687
suspend/resume
The goal is to avoid that the vt(4) resume happens before the video
display is resumed. The original patch was provided by Andriy Gapon.
This new patch registers the handlers in vt_upgrade(). This is done
once, thanks to the VDF_ASYNC flag. I abused this flag because it was
already abused by the keyboard allocation. The event handlers then call
the backend if it provides callbacks for suspend/resume.
Differential Revision: https://reviews.freebsd.org/D1004
On behalf of: dumbbell
MFC after: 2 weeks
There were two issues:
1. The area given to vt_is_cursor_in_area() was adding the drawable
area offset, something already handled by this function.
2. The cursor was shifted on the screen by the offset of this area
and thus was misplaced or not erased. Furthermore, when reaching
the bottom or right borders, the cursor was either totally
removed or not erased correctly.
MFC after: 1 week
This allows backends to verify they do not draw outside of this area.
This fixes a bug in vt_vga where the text was happily drawn over the
right and bottom margins, when using the Gallant font.
MFC after: 1 week
