Create a struct icl_soft_conn which extends struct icl_conn and
move fields only used by icl_soft from struct icl_conn to
struct icl_soft_conn.
Reviewed by: mav
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D31414
The remote peer might send a FIN in the middle of a burst of data
PDUs. In the case of T6 with data PDU completion moderation, the
driver would not have seen these PDUs since the final PDU in the burst
was never received resulting in a stale rcv_nxt when the FIN is
received.
While here, invert the logic in the condition to be more readable and
always set tp->rcv_nxt from the sequence number in the CPL. This sets
the proper value of rcv_nxt for FINs on connections with data received
but not reported via a CPL (e.g. a partial iSCSI PDU burst interrupted
by a FIN).
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30871
Recent firmware versions round down the value passed here by the MSS
and subsequently mishandle transmitted PDUs larger than the rounded
down value.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
This ensures the TOE has finished processing any in-flight received
data before returning to the caller. The caller assumes it is safe to
free any open tasks or transfers (and associated buffers) after this
function returns.
Previously, data placed directly via DDP could be written to buffers
after the caller had freed the buffers.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
If a data PDU encounters an error such as a digest error, the firmware
will report that data PDU when completion moderation is active even if
it is not the final data PDU in a burst.
Sponsored by: Chelsio Communications
A non-placed PDU can be delivered by CPL_RX_ISCSI_CMP in the middle of
a burst of placed PDUs (received via DDP) in which case the rcv_nxt
will not match the start of the non-placed PDU.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
These registers have read side effects and a read at just the right
(wrong?) time can trash some internal hw state.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.
Fixes
-----
BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
Linux commit:
f696bf6d64b195b83ca1bdb7cd33c999c9dcf514
7bb1fafc2f163ad03a2007295bb2f57cfdbfb630
d34ac5cd3a73aacd11009c4fc3ba15d7ea62c411
MFC after: 1 week
Reviewed by: kib
Sponsored by: Mellanox Technologies // NVIDIA Networking
The driver used to configure all available classes with some default
parameters on attach and the rest of t4_sched.c was written with the
assumption that all traffic classes are always valid in the hardware.
But this resulted in a lot of informational messages being logged in the
firmware's circular log, crowding out other more useful messages.
This change leaves the tx scheduler alone during attach to reduce the
spam in the devlog. The state of every class is now tracked separately
from its flags and there is support for an 'uninitialized' state.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Recent firmwares are able to utilize the traffic classes of tx channels
that were previously unused. This effectively doubles the number of
traffic classes available per port for 2 port cards. Stop using the raw
per-channel value in the driver and ask the firmware for the number of
usable traffic classes instead.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
If the connection is in the process of disconnecting, ic_socket can be
NULL. For icl_cxgbei_conn_transfer_setup(), lock the connection and
check ic_socket before using it. For icl_cxgbei_conn_task_setup(),
the caller already holds the connection lock, so assert it and bail
early with ECONNRESET if the connection is disconnecting.
Reported by: Jithesh Arakkan @ Chelsio
Fixes: f949967c8e cxgbei: Fix a race between transfer setup and a peer reset.
The NIC TLS and TOE TLS modes in cxgbe(4) both work with TLS key
contexts. Previously, TOE TLS supported TLS key contexts created by
two different methods, and NIC TLS had a separate bit of code copied
from NIC TLS but specific to KTLS. Now that TOE TLS only supports
KTLS, pull common code for creating TLS key contexts and programming
them into on-card memory into t4_keyctx.c.
Sponsored by: Chelsio Communications
TOE TLS offload was first supported via a customized OpenSSL developed
by Chelsio with proprietary socket options prior to KTLS being present
either in FreeBSD or upstream OpenSSL. With the addition of KTLS in
both places, cxgbe's TOE driver was extended to support TLS offload
via KTLS as well. This change removes the older interface leaving
only the KTLS bindings for TOE TLS.
Since KTLS was added to TOE TLS second, it was somehat shoe-horned
into the existing code. In addition to removing the non-KTLS TLS
offload, refactor and simplify the code to assume KTLS, e.g. not
copying keys into a helper structure that mimic'ed the non-KTLS mode,
but using the KTLS session object directly when constructing key
contexts.
This also removes some unused code to send TX keys inline in work
requests for TOE TLS. This code was never enabled, and was arguably
sending the wrong thing (it was not sending the raw key context as we
do for NIC TLS when using inline keys).
Sponsored by: Chelsio Communications
Use the correct SGL limit within iw_cxgbe, firmwares >= 1.25.6.0 support
upto 512 entries per MR.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
Changes since 1.25.0.0 are listed here. This list comes from the
Release Notes for the "Chelsio Unified Wire v3.14.0.3 for Linux"
release dated 2021-05-21.
Fixes
-----
BASE:
- Fixed Back to back T6 100G-CR4 link coming up with NO FEC sometimes.
- [T5] Try to bring up link in 1G speed if link doesn't come up on 10G.
- Fixed a bug to not allow BaseR fec in 100G speed.
- Fixed linkup issues on BT adapter in 1G and 100M speed.
- Fixed an issue to allow driver to send VI_ENABLE multiple times (once
with rx disable and then later rx enable).
- Fixed rate limiting not working on class number 16 to 30.
- Fixed backward compatibility issue in port type interpretation with vpd
version 0x80.
ETH:
- Fixed a case when firmware failed to deliver NIC WR completion to host.
- No rate limit support for WR ETH_TX_PKTS2 due to performance reasons.
OFLD
- Fixed a connection hang in SO adapters when tp_plen_max (set by driver)
is more than the window size.
- Added fw_filter_vnic_mode to firmware API file (t4fw_interface.h)
- Use correct rx channel in coprocessor crypto completion (CPL_FW6_PLD). This
was causing out of order completion to host.
FOiSCSI
- Fixed a crash due to unaligned access of ipv6 address.
- Fixed a crash during lun reset.
Enhancements
------------
ETH:
- Rate limiting support added for encapsulated (vxlan, nvgre, geneve) NIC TCP
packets.
OFLD:
- More than 128 SGLs supported in FW_RI_FR_NSMR_WR. Now, more than 16GB
(upto 64GB) of PBLs can be written with single FW_RI_FR_NSMR_WR.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
If an iSCSI connection is shutdown abruptly (e.g. by a RST from the
peer), pending iSCSI PDUs and page pod work requests can be in the
ulp_pduq when the final CPL is received indicating the death of the
connection.
Reported by: Jithesh Arakkan @ Chelsio
In 4427ac3675, the TOM driver stopped sending work requests to
program iSCSI page pods directly and instead queued them to be written
asynchronously with iSCSI PDUs. The queue of mbufs to send is
protected by the inp lock. However, the inp cannot be safely obtained
from the toep since a RST from the remote peer might have cleared
toep->inp asynchronously in an ithread. To fix, obtain the inp from
the socket as is already done in icl_cxgbei_conn_pdu_queue_cb() and
fail the new transfer setup with ECONNRESET if the connection has been
reset.
To avoid passing sockets or inps into the page pod routines, pull the
mbufq out of the two relevant page pod routines such that the routines
queue new work request mbufs to a caller-supplied mbufq.
Reported by: Jithesh Arakkan @ Chelsio
Fixes: 4427ac3675
T6 makes several changes relative to T5 for receive of iSCSI PDUs.
First, earlier adapters issue either 2 or 3 messages to the host for
each PDU received: CPL_ISCSI_HDR contains the BHS of the PDU,
CPL_ISCSI_DATA (when DDP is not used for zero-copy receive) contains
the PDU data as buffers on the freelist, and CPL_RX_ISCSI_DDP with
status of the PDU such as result of CRC checks. In T6, a new
CPL_RX_ISCSI_CMP combines CPL_ISCSI_HDR and CPL_RX_ISCSI_DDP. Data
PDUs which are directly placed via DDP only report a single
CPL_RX_ISCSI_CMP message. Data PDUs received on the free lists are
reported as CPL_ISCSI_DATA followed by CPL_RX_ISCSI_CMP. Control PDUs
such as R2T are still reported via CPL_ISCSI_HDR and CPL_RX_ISCSI_DDP.
Supporting this requires changing the CPL_ISCSI_DATA handler to
allocate a PDU structure if it is not preceded by a CPL_ISCSI_HDR as
well as support for the new CPL_RX_ISCSI_CMP.
Second, when using DDP for zero-copy receive, T6 will only issue a
CPL_RX_ISCSI_CMP after a burst of PDUs have been received (indicated
by the F flag in the BHS). In this case, the CPL_RX_ISCSI_CMP can
reflect the completion of multiple PDUs and the BHS and TCP sequence
number included in the message are from the last PDU received in the
burst. Notably, the message does not include any information about
earlier PDUs received as part of the burst. Instead, the driver must
track the amount of data already received for a given transfer and use
this to compute the amount of data received in a burst. In addition,
the iSCSI layer currently has no way to permit receiving a logical PDU
which spans multiple PDUs. Instead, the driver presents each burst as
a single, "large" PDU to the iSCSI target and initiators. This is
done by rewriting the buffer offset and data length fields in the BHS
of the final PDU as well as rewriting the DataSN so that the received
PDUs appear to be in order.
To track all this, cxgbei maintains a hash table of 'cxgbei_cmp'
structures indexed by transfer tags for each offloaded iSCSI
connection. When a SCSI_DATA_IN message is received, the ITT from the
received BHS is used to find the necessary state in the hash table,
whereas SCSI_DATA_OUT replies use the TTT as the key. The structure
tracks the expected starting offset and DataSN of the next burst as
well as the rewritten DataSN value used for the previously received
PDU.
Discussed with: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30458
CTRL and OFLD tx queues do not have automatic tx credit flush enabled so
it is okay for the cidx not to be the same as the pidx when the queue is
destroyed.
Reported by: Jithesh Arakkan @ Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communications
This is intended for use in KTLS transmit where each TLS record is
described by a single mbuf that is itself queued in the socket buffer.
Using the existing CRYPTO_BUF_MBUF would result in
bus_dmamap_load_crp() walking additional mbufs in the socket buffer
that are not relevant, but generating a S/G list that potentially
exceeds the limit of the tag (while also wasting CPU cycles).
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30136
- Process the list of local IPs once instead of once per adapter. Add
addresses from all VNETs to the driver's list but leave hardware
updates for later when the global VNET/IFADDR list locks have been
released.
- Add address to the hardware table synchronously when a CLIP entry is
requested for an address that's not already in there.
- Provide ioctls that allow userspace tools to manage addresses in the
CLIP table.
- Add a knob (hw.cxgbe.clip_db_auto) that controls whether local IPs are
automatically added to the CLIP table or not.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
This fixes a few bugs in iSCSI backends where the backends were using
the limits they advertised initially during the login phase as the
final values instead of the values negotiated with the other end.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D30271
These were seemingly copied over from icl_soft.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30268
I botched a few of the changes when rebasing the changes in
4b6ed0758d across the changes in
43bbae1948.
- Move the counter allocations into alloc_ofld_rxq().
- Free the counters freeing an ofld rxq.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D30267
The CTL frontend might have provided a buffer that is smaller than the
FirstBurstLength and thus smaller than the amount of unsolicited data
included in the request PDU. Treat these transfers as an empty
transfer.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29940
A single union ctl_io can be reused across multiple transfers (in
particular by the ramdisk backend). On a reuse, the reservation
pointer would retain its value from the previous transfer tripping an
assertion.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29939
- Switch to allocating the cxgbei version of icl_pdu explicitly
as a separate refcounted object allocated via malloc/free
instead of storing it in the bhs mbuf prior to the bhs.
- Support the icl_conn_pdu_queue_cb() method to set a callback
on a PDU to be invoked when the PDU is freed.
- For ICL_NOCOPY buffers, use an external mbuf to manage the
storage for the buffer via m_extaddref(). Each external mbuf
holds a reference on the associated PDU, so the callback is
invoked once all of the external mbufs have been freed.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29910
- Only allocate 16K jumbo mbufs if the region of data to be
appended is sufficiently large, and use a loop.
- Use m_getm2() to allocate a chain for data less than 16K, or
if m_getjcl() fails.
- Use ENOMEM as the return value instead of '1' if the hook fails due
to a memory allocation error.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29909
A CAM target layer I/O CCB can use a S/G list of virtual address ranges
to describe its data buffer. This change adds zero-copy receive support
for such requests.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29908
As a result, CPL_FW4_ACK now returns credits for these work requests.
To support this, page pod work requests are now constructed in special
mbufs similar to "raw" mbufs used for NIC TLS in plain TX queues.
These special mbufs are stored in the ulp_pduq and dispatched in order
with PDU work requests.
Sponsored by: Chelsio Communications
Discussed with: np
Differential Revision: https://reviews.freebsd.org/D29904
