Not sure why these haven't been committed with the rest of the SoC Audio
project. They work sufficiently well for me.
Discussed with: manu
MFC after: 1 month
It adds the PIC functionality on top of qoriq_gpio driver.
We need a separate module since the powerpc PIC API is completely
different than on other architectures.
Two types of intr_map_data are supported:
INTR_MAP_DATA_GPIO and INTR_MAP_DATA_FDT.
This way interrupts can be allocated using the userspace gpio
interrupt allocation method, as well as directly from simplebus.
The latter can be used by devices that have its irq routed to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
It appears that the emitted code in the caller does not update shadow
state for values passed on the stack to the callee, which it seemingly
ought to do after pushing values on the stack and prior to the call
itself. This leaves open a window where an interrupt handler can cause
regions of the stack containing these values to be poisoned, resulting
in rare false positive reports. This happens particularly in the amd64
TLB invalidation code, where we liberally pass cpuset_t's around by
value.
LLVM has a flag to disable validation of accesses of function parameters
passed by value. Such validation is itself a relatively new feature.
Turn it off for now.
Reported by: pho, syzkaller
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This makes hwpmc(4) sampling work on ACPI-based AArch64 systems.
Tested on ARM Neoverse N1.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: jrtc27, mhorne
Differential Revision: https://reviews.freebsd.org/D24423
It was previously used by felix(4) for PHY communication.
Since that is not the case anymore this driver is now left unused.
Obtained from: Semihalf
Sponsored by: Alstom Group
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95c, MFC'd to stable/10 in ba54910169). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The upcoming QCA ipq401x support detects the CP14 debug features,
but any attempt to use it causes an undefined instruction error.
It apparently needs a specific TZ image loaded by the early bootloader
(SBL) in order to enable these kinds of features.
So add a new kernel option that explicitly disables this in the
arm code - the debugger works fine without it.
These are hardware configuration options which are required in
the linux/openwrt device trees for the IPQ4018/IPQ4019 devices.
Since this isn't obtained from linux upstream but instead from
openwrt, this can't go in contrib; instead it is going in
sys/dts/include/ .
Obtained from: OpenWRT
Tested:
* IPQ4019 ASUS RT-AC58U AP, initial bootstrapping
This partially reverts e81e77c5a0, leaving the option both in
GENERICs on amd64/arm64/arm, and in global NOTES file. Apparently
this better matches existing practice, where we do not try to hard
to make LINT and GENERIC complimentary.
Requested and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Remove the option from NOTES/LINT, and add to NOTES for powerpc and
riscv.
PR: 259036
Requested by: John Hay <john@sanren.ac.za>
Discussed with: ian, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
also move ptrace-related helpers to ptrace_machdep.c
Apply some style. Use ANSI C function definitions.
Remove MPSAFE annotations.
Reviewed by: emaste, imp
Discussed with: jrtc27
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32310
The FreeBSD nvme driver has reset the nvme controller twice on attach to
address a theoretical issue assuring the hardware is in a known
state. However, exierence has shown the second reset is unnecessary and
increases the time to boot. Eliminate the second reset. Should there be
a situation when you need a second reset (for buggy or at least somewhat
out of the mainstream hardware), the hardware option NVME_2X_RESET will
restore the old behavior. Document this in nvme(4).
If there's any trouble at all with this, I'll add a sysctl tunable to
control it.
Sponsored by: Netflix
Reviewed by: cperciva, mav
Differential Revision: https://reviews.freebsd.org/D32241
The previous update to handle the gicv2m as a child of the gicv3 driver
assumed there was only a single gicv2m child. On some hardware there
are multiple children. Support this by removing the mbi ivars and
adding a new interface to handle MSI allocation in a given range.
Tested by: mw, trasz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32224
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
except linux/pci.h to avoid conflicts with Linux version.
This allows to #define resource in drm-kmod globally and strip some #ifdef-s
Reviewed by: hselasky, manu
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31673
Add support for ACPI device probing for SDHCI controller found on Marvell chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31600
This patch splits driver code into two seperate files sdhci_xenon.c
and sdhci_xenon_fdt.c. This will allow future implementation of ACPI
discovery of sdhci on Xenon chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31599
The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."
Version : 1.26.2.0
Date : 09/24/2021
====================
FIXES
-----
BASE:
- Added support for SFP+ RJ45 (0x1C).
- Fixing backward compatibility issue with older drivers when multiple
speeds are passed to firmware.
OFLD:
- Do not touch tp_plen_max if driver is supplying tp_plen_max. This
fixes a connection reset issue in iscsi.
ENHANCEMENTS
------------
BASE:
- Firmware header modified to add firmware binary signature.
MFC after: 1 month
Sponsored by: Chelsio Communications
GCC complains about the use of alloca() with variable sizes (for XSAVE
state len) in sendsig() for i386. Modern XSAVE state is probably
getting a bit large for the i386 kstack, but downgrade the error to a
warning.
Reviewed by: kib, emaste
Differential Revision: https://reviews.freebsd.org/D31934
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
from machdep.c which is too large pile of unrelated things.
Some ptrace functions are moved from machdep.c to ptrace_machdep.c.
Now machdep.c contains code mostly related to the low level initialization
and regular low level operation of the architecture, while signal MD code
and registers handling is placed in exec_machdep.c.
Reviewed by: jhb, markj
Discussed with: jrtc27
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
When building ENA as compiled into the kernel, the driver would fail to
build. Resolve the problem by introducing the following changes:
1. Add missing `ena_rss.c` entry in `sys/conf/files`.
2. Prevent SYSCTL_ADD_INT from throwing an assert due to an extra
CTLTYPE_INT flag.
Fixes: 986e7b9227 ("ena: Move RSS logic into its own source files")
Fixes: 6d1ef2abd3 ("ena: Implement full RSS reconfiguration")
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
ib_uverbs_flow_resources_free() is declard in two header files in
upstream OFED. Disable the warning to avoid introducing diffs to fix
the build on GCC 9.
While here, fix the ibcore module to disable the same warnings
disabled in OFED_CFLAGS.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31943
- kern_kcov.c needs to be compiled with -fsanitize=kernel-memory when
KMSAN is configured since it calls into various other subsystems.
- Disable address and memory sanitizers in kcov(4)'s coverage sanitizer
callbacks, as they do not provide useful checking. Moreover, with
KMSAN we may otherwise get false positives since the caller (coverage
sanitizer runtime) is not instrumented.
- Disable KASAN and KMSAN interceptors in subr_coverage.c, as they do
not provide any benefit but do introduce overhead when fuzzing.
Sponsored by: The FreeBSD Foundation
The file as is is the maze of #ifdef passages, all slightly different.
Divorcing i386 and amd64 version actually makes changing the code
easier, also no changes for i386 are planned.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31931
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Switch the main syscall table to use CAPENABLED flags rather than
capabilities.conf. This avoid synchronization issues between
syscalls.master and capabilities.conf (e.g. when renaming a syscall
during development).
For now, move capabilities.conf to sys/compat/freebsd32 and use it
there. Use of sys/compat/freebsd32/syscalls.master should be replaced
by makesyscalls.lua enhancements to allow the main one to be used.
This change results in no changes to generated files after running
`make sysent`.
Reviewed by: kevans, emaste
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D31350
Clang 13.0.0 now has a -Wunused-but-set-variable warning similar to the
one gcc has had for quite a while. Since this triggers *very* often for
our kernel builds, don't make it a hard error, but leave the warning
visible so is some incentive to fix the instances.
MFC after: 3 days
MANA is the new network adapter from Microsoft which will be available
in Azure public cloud. It provides SRIOV NIC as virtual function to
guest OS running on Hyper-V.
The code can be divided into two major parts. Gdma_main.c is the one to
bring up the hardware board and drives all underlying hardware queue
infrastructure. Mana_en.c contains all main ethernet driver code.
It has only tested and supported on amd64 architecture.
PR: 256336
Reviewed by: decui@microsoft.com
Tested by: whu
MFC after: 2 week
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D31150
