r360979 erroneously assumed that the lowest mapping in an address space
would be a file mapping, but of course this is not true in general.
Reported and tested by: Frederic Chardon <chardon.frederic@gmail.com>
MFC after: 3 days
Clang IAS does not support the --defsym argument, and
.ifndef SKEIN_USE_ASM
gets turned into
.ifndef 1792
by the preprocessor, which results in
error: expected identifier after '.ifdef'
.ifndef 1792
^
Use #ifdef instead, which still works with GNU as.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25154
vfs.zfs.boot.primary_pool is only set on BIOS boot, use vfs.root.mountfrom
instead and update all vdevs on pool.
Reviewed by: allanjude
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25103
For synthetic aliases (just pseudonyms inferred from metadata like GPT or
UFS labels, GPT UUIDs, etc), use the GEOM provider aliasing system to create
a symlink to the real device instead of creating an independent device.
This makes it more clear which labels and devices correspond, and we can
safely have multiple labels to a single device accessed at once.
The confusingly named geom_label on-disk construct continues to behave
identically to how it did before.
This requires teaching GEOM's provider aliasing about the possibility
that aliases might be added later in time, and GEOM's devfs interaction
layer not to worry about existing aliases during retaste.
Discussed with: imp
Relnotes: sure, if we don't end up reverting it
Differential Revision: https://reviews.freebsd.org/D24968
Turns out this isn't a required call. I didn't pick it up because my
uncommitted changes involve new updateslot methods for cards I'm working
on.
Dunce hat to: adrian
GNU as seems to allow macro arguments without the '\' but clang is more
strict in that regard.
This change makes the source code compatible with LLVM's but does not yet
change the build system or rename it to .S.
The new code assembles identically with GNU as 2.17.50.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D25143
Since we had a .set reorder, the nop after the "jal" was being placed after
the delay slot, resulting in two nops.
While changing this code also guard the .set noreorder with .set push/pop
and use $zero as the cpsetup save register since we don't need to save $gp.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D25025
Copying the approach chosen in r309412. This fixes building the libc tests
on a macOS host since the macOS /bin/dd binary does not support status=none.
As there only seem to be two uses, this commit changes the two Makefiles.
If this becomes more common, we could also add a wrapper bootstrap script
that ignores status= and forwards the remaining args to the real dd.
Another alternative would be to remove the status flag and pipe stderr to
/dev/null, but them we lose error messages.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D24785
and not only the software cache of that register. Else
pci_channel_offline() won't detect that the PCI device is gone when
using the LinuxKPI.
MFC after: 1 week
Sponsored by: Mellanox Technologies
description of items residing in a so-called union. FreeBSD currently
only supports 4 such pop levels.
If the push level is not restored within the processing of the same
HID item, an invalid memory location may be used for subsequent HID
item processing.
Verify that the push level is always valid when processing HID items.
Reported by: Andy Nguyen (Google)
MFC after: 3 days
Sponsored by: Mellanox Technologies
This is hopefully a big no-op unless you're running some extra
patches to flip on A-MSDU options in a driver.
802.11n supports sending A-MSDU in A-MPDU. That lets you do things
like pack small frames into an A-MSDU and stuff /those/ into an A-MPDU.
It allows for much more efficient airtime because you're not
wasting time sending small frames - which is still a problem when
doing A-MPDU as there's still per-frame overhead and minimum A-MPDU
density requirements.
It, however, is optional for 802.11n. A lot of stuff doesn't advertise
it (but does it, just wait!); and I know that ath10k does it and my
ath(4) driver work supports it.
Now, 802.11ac makes A-MSDU in A-MPDU something that can happen more
frequently, because even though you can send very large A-MPDUs
(like 1 megabyte and larger) you still have the small frame problem.
So, 802.11ac NICs like ath10k and iwm will support A-MSDU in A-MPDU
out of the box if it's enabled - and you can negotiate it.
So, let's lay down the ground work to enable A-MSDU in A-MPDU.
This will allow hardware like iwn(4) and ath(4) which supports
software A-MSDU but hardware A-MPDU to be more efficient.
Drivers that support A-MSDU in A-MPDU will set TX/RX htcap flags.
Note this is separate from the software A-MSDU encap path; /that/
dictates whether net80211 is doing A-MSDU encapsulation or not.
These HTC flags control negotiation, NOT encapsulation.
Once this negotiation and driver bits are done, hardware like
rtwn(4), run(4), and others will be able to use A-MSDU even without
A-MPDU working; right now FF and A-MSDU aren't even attempted
if you're an 11n node. It's a small hold-over from the initial
A-MPDU work and I know how to fix it, but to flip it on properly
I need to be able to negotiate or ignore A-MSDU in A-MPDU.
Oh and the fun part - some 11ac APs I've tested will quite happily
decap A-MSDU in A-MPDU even though they don't negotiate it when
doing 802.11n. So hey, I know it works - I just want to properly
handle things. :-)
Tested:
* AR9380, STA/AP mode
The 11b/11g ERP and slot time update handling are two things which weren't
migrated into the per-VAP state when Sam did the initial VAP work.
That makes sense for a lot of setups where net80211 is driving radio state
and the radio only cares about the shared state.
However, as noted by a now deleted comment, the ERP and slot time updates
aren't EXACTLY correct/accurate - they only take into account the most
RECENTLY created VAP, and the state updates when one creates/destroys
VAPs isn't exactly great.
So:
* track the short slot logic per VAP;
* whenever the slot time configuration changes, just push it into a deferred
task queue update so drivers don't have to serialise it themselves;
* if a driver registers a per-VAP slot time handler then it'll just get the
per VAP one;
* .. if a driver registers a global one then the legacy behaviour is maintained -
a single slot time is calculated and pushed out.
Note that the calculated slot time is better than the existing logic - if ANY
of the VAPs require long slot then it's disabled for all VAPs rather than
whatever the last configured VAP did.
Now, this isn't entirely complete - the rest of ERP tracking around short/long
slot capable station tracking needs to be converted into per-VAP, as well
as the preamble/barker flags. Luckily those also can be done in a similar
fashion - keep per-VAP counters/flags and unify them before doing the driver
update. I'll defer that work until later.
All the existing drivers can keep doing what they're doing with the global
slot time flags as that is maintained. One driver (iwi) used the per-VAP
flags instead of the ic flags, so now that driver will work properly.
This unblocks some ath10k porting work as the firmware takes the slot time
configuration per-VAP rather than globally, and some firmware handles
STA+AP and STA+STA (on same/different channels) configurations where
the firmware will switch slot time as appropriate.
Tested:
* AR9380, STA/AP mode
* AR9880 (ath10k), STA mode
net80211 currently doesn't negotiate A-MSDU in A-MPDU during ADDBA.
I've added the field in net80211 and this commit:
* Prints out the ADDBA field value during ADDBA;
* Adds some comments around where I need to follow up with some
negotiation logic.
Right now we don't have a driver flag anywhere which controls
whether A-MSDU in A-MPDU is allowed. I know it works (I have it
manually turned on at home on a couple test APs, heh!) but
I can't flip it on until we can negotiate it.
Tested:
* AR9380, STA/AP mode, printing out ADDBA requests
These are from the linux iwlwifi driver ;the default use smaller
maximum AMPDUs (8k) and a much smaller density (none.) The latter
could cause stability issues.
Tested:
* Tested on Intel 6300, STA mode.
Differential Revision: https://reviews.freebsd.org/D25113
Now that I have A-MSDU and A-MPDU coexisting together, we need to actually
announce if (a) it's permitted and (b) figure out if we should use it
when transmitting.
This just adds the field; it doesn't yet include it in ADDBA exchanges.
My AMD Ryzen system has 4 AHCI controllers, each supporting 16 MSI vectors.
Since two of the controllers have only one SATA port, limit to single MSI
saves system 30 interrupt vectors for free.
It may be possible to also limit number of MSI vectors to 4 and 8 for the
other two controllers, but according to the AHCI specification after that
controllers may revert to only one vector, that would be a bigger loss to
risk.
MFC after: 2 weeks
requires that new data on growing files be accessible. Thus, the
the fsyncdata() system call must update the on-disk inode when the
size of the file has changed.
This commit adds another inode update flag, IN_SIZEMOD, that gets
set any time that the file size changes. If either the IN_IBLKDATA
or the IN_SIZEMOD flag is set when fdatasync() is called, the
associated inode is synchronously written to disk. We could have
overloaded the IN_IBLKDATA flag to also track size changes since
the only (current) use case for these flags are for fsyncdata(),
but it does seem useful for possible future uses to separately
track the file size changes and the inode block pointer changes.
Reviewed by: kib
MFC with: -r361785
Differential revision: https://reviews.freebsd.org/D25072
I'm trying to chase down more weird "I am not doing an incremental scan
when being asked" issues so these debugging statements help.
Notably, I've added more debugging around reasons why the scan is skipped -
eg because the cache is considered hot.
This should be a no-op unless you care about the debugging output!
This sends a probe request after IBSS node discovery through
beacon frames. This allows things like HT and VHT capabilities
to be "negotiated" in adhoc mode.
It is .. kinda fire and pray - this isn't retried after discovery
so it's quite possible that nodes occasionally don't come up with
HT/VHT rate upgrades. At some point it may be a fun side project
to add support for retrying these probe requests/negotiations
after IBSS node discovery.
Tested:
* tested with multiple ath(4) NICs in 11n mode.
Differential Revision: https://reviews.freebsd.org/D24979
At this point, AES is the more common name for Rijndael128. setkey(8)
will still accept the old name, and old constants remain for
compatiblity.
Reviewed by: cem, bcr (manpages)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24964
It was pointed out to me that this is the convention for documenting upgrade
instructions, rather than just leaving the instructions in the commit message.
It's possible these commands won't be used again before we transition to git,
but then at least they'll give a path forward for whoever touches this next.
Suggested by: lwhsu
FreeBSD DD utility has not had support for the O_DIRECT flag, which
is useful to bypass local caching, e.g. for unconditionally issuing
NFS IO requests during testing.
Reviewed by: rgrimes (mentor)
Approved by: rgrimes (mentor, blanket)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25066
This change introduces Comet Lake Mobile Platform support in the e1000
driver along with shared code patches described below.
- Cast return value of e1000_ltr2ns() to higher type to avoid overflow
- Remove useless statement of assigning act_offset
- Add initialization of identification LED
- Fix flow control setup after connected standby:
After connected standby the driver blocks resets during
"AdapterStart" and skips flow control setup. This change adds
condition in e1000_setup_link_ich8lan() to always setup flow control
and to setup physical interface only when there is no need to block
resets.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: erj@
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D25035
KTLS encryption requests for file-backed data such as from sendfile(2)
require the encrypted data to be stored in a separate buffer from the
unencrypted file input data. Previously the OCF backend for KTLS
manually copied the data from the input buffer to the output buffer
before queueing the crypto request. Now the OCF backend will use a
separate output buffer for such requests and avoid the copy. This
mostly helps when an async co-processor is used by saving CPU cycles
used on the copy.
Reviewed by: gallatin (earlier version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24545
We use these to compile libefivar. The particular motivation for this update is
the inclusion of the RISC-V machine definitions that allow us to build the
library on the platform. This support could easily have been submitted as a
small local diff, but the timing of the release coincided with this work, and
it has been over 3 years since these sources were initially imported.
Note that this comes with a license change from regular BSD 2-clause to the
BSD+Patent license. This has been approved by core@ for this particular
project [1].
As with the original import, we retain only the subset of headers that we
actually need to build libefivar. I adapted imp@'s process slightly for this
update:
# Generate list of the headers needed to build
cp -r ../vendor/edk2/dist/MdePkg/Include sys/contrib/edk2
cd lib/libefivar
make
pushd `make -V .OBJDIR`
cat .depend*.o | grep sys/contrib | cut -d' ' -f 3 |
sort -u | sed -e 's=/full/path/sys/contrib/edk2/==' > /tmp/xxx
popd
# Merge the needed files
cd ../../sys/contrib/edk2
svn revert -R .
for i in `cat /tmp/xxx`; do
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/$i $i
done
svn merge -c VendorRevision svn+ssh://repo.freebsd.org/base/vendor/edk2/dist/MdePkg/MdePkg.dec MdePkg.dec
[1] https://www.freebsd.org/internal/software-license.html
This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
Differential Revision: https://reviews.freebsd.org/D24596
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
[0] https://www.freebsd.org/security/advisories/FreeBSD-SA-19:10.ufs.asc
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
MFC after: 1 month (note the MFC plan mentioned above)
Relnotes: absolutely, but will amend previous RELNOTES entry
Differential Revision: https://reviews.freebsd.org/D24596
A logic bug in remove_protocol() meant that it would remove (leak) all
structures in the list preceding the one intended for removal.
PR: 245971
Submitted by: joost@jodocus.org (original version)
MFC after: 1 week
Remove world-readability from the root directory. Sensitive information may be
stored in /root and we diverge here from normative administrative practice, as
well as installation defaults of other Unix-alikes. The wheel group is still
permitted to read the directory.
750 is no more restrictive than defaults for the rest of the open source
Unix-alike world. In particular, Ben Woods surveyed DragonFly, NetBSD,
OpenBSD, ArchLinux, CentOS, Debian, Fedora, Slackware, and Ubuntu. None have a
world-readable /root by default.
Submitted by: Gordon Bergling <gbergling AT gmail.com>
Reviewed by: ian, myself
Discussed with: emaste (informal approval)
Relnotes: sure?
Differential Revision: https://reviews.freebsd.org/D23392
Now options -g/-G allow to select/unselect interfaces by groups
in the "ifconfig -a" output just like already existing -d/-u.
Examples:
to exclude loopback from the list: ifconfig -a -G lo
to show vlan interfaces only: ifconfig -a -g vlan
to show tap interfaces that are up: ifconfig -aug tap
Arguments to -g/-G may be shell patterns and both may be specified.
Later options -g/-G override previous ones.
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25029
That assumption should be true when superio(4) uses the hardware
exlusively. But it turns out to not hold on some real systems.
So, err on the side of correctness rather than performance.
Clear current_ldn in sio_conf_exit.
Reported by: bz
Tested by: bz
MFC after: 1 week
Some capability descriptions under list scan actually described flags.
Some capability descriptions were missing.
Some flag descriptions under list sta actually described capabilites.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25014
The fdatasync() description in POSIX specifies that
all I/O operations shall be completed as defined for synchronized I/O
data integrity completion.
and then the explanation of Synchronized I/O Data Integrity Completion says
The write is complete only when the data specified in the write
request is successfully transferred and all file system
information required to retrieve the data is successfully
transferred.
For UFS this means that all pointers must be on disk. Indirect
pointers already contribute to the list of dirty data blocks, so only
direct blocks and root pointers to indirect blocks, both of which
reside in the inode block, should be taken care of. In ffs_balloc(),
mark the inode with the new flag IN_IBLKDATA that specifies that
ffs_syncvnode(DATA_ONLY) needs a call to ffs_update() to flush the
inode block.
Reviewed by: mckusick
Discussed with: tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25072
