An execute-only fd (opened with O_EXEC) allows neither read() nor write()
and is therefore incompatible with all stdio modes. Therefore, the [EINVAL]
error applies.
Also adjust the similar check in freopen() with a NULL path, even though
this checks an fd which is already from a FILE.
If realpath() is called on pathnames like "/dev/null/." or "/dev/null/..",
it should fail with [ENOTDIR]. Pathnames like "/dev/null/" already failed as
they should.
Also, put the check for non-directories after lstatting the previous
component instead of when the empty component (consecutive or trailing
slashes) is detected, saving an lstat() call and some lines of code.
PR: kern/82980
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
kqueue(2) already supports EVFILT_PROC. Add an EVFILT_PROCDESC that
behaves the same, but operates on a procdesc(4) instead. Only implement
NOTE_EXIT for now. The nice thing about NOTE_EXIT is that it also
returns the exit status of the process, meaning that we can now obtain
this value, even if pdwait4(2) is still unimplemented.
Notes:
- Simply reuse EVFILT_NETDEV for EVFILT_PROCDESC. As both of these will
be used on totally different descriptor types, this should not clash.
- Let procdesc_kqops_event() reuse the same structure as filt_proc().
The only difference is that procdesc_kqops_event() should also be able
to deal with the case where the process was already terminated after
registration. Simply test this when hint == 0.
- Fix some style(9) issues in filt_proc() to keep it consistent with the
newly added procdesc_kqops_event().
- Save the exit status of the process in pd->pd_xstat, as we cannot pick
up the proctree_lock from within procdesc_kqops_event().
Discussed on: arch@
Reviewed by: kib@
are unaware of RFC 3542 can construct control messages.
The kernel disallows mixing RFC 2292 behaviour with RFC 3542 behaviour.
Only sockets that have specifically been marked as using the RFC 2292
API can use RFC 2292 specific options. This is all good and well, but
libc itself seems inconsistent with this.
The root cause of this inconsistency seems to relate to the definitions
of IPV6_HOPOPTS and IPV6_DSTOPTS. They are defined in RFC 2292 and re-used
in RFC 3542, yet have distinct values in the kernel. It's for this reason
that the kernel also has definitions for IPV6_2292HOPOPTS and
IPV6_2292DSTOPTS. Not so in libc.
For example: some program calls inet6_option_init() (defined by RFC 2292)
with the RFC 2292 defined IPV6_HOPOPTS and IPV6_DSTOPTS. Before RFC 3542,
this was translated to values of 22 and 23 (resp.) The libc implementation
correctly checks that only options IPV6_HOPOPTS and IPV6_DSTOPTS are given
(as per RFC 2292) but since these defines have taken on the values defined
by RFC 3542 (values 49 and 50 resp,) rejects the correct option values
(22 and 23) passed said program and returns -1.
The precisie fix is to have inet6_option_init() and friends only accept the
RFC 2292 defined IPV6_HOPOPTS & IPV6_DSTOPTS, but that breaks other code
(like mld6query(8)), which seem to not be aware of RFC 3542 and how it
hi-jacked the option names. So the best fix is to accept the options from
both.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
pointer for the login name (result). Make sure to handle that
case properly. Improve robustness by checking namelen and then
nul-terminating the provided buffer to simplify subsequent logic.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
The pdfork(2) man page states:
"pdfork() returns a PID, 0 or -1, as fork(2) does."
As it returns a PID, the return type should obviously be pid_t. As int
and pid_t have the same size on all architectures, this change does not
affect the ABI in any way.
causing mb* functions (and similar) to be called with the wrong data
(possibly a null pointer, causing a crash).
PR: standards/188036
MFC after: 1 week
A bug caused the "big endian" flag to be lost when receiving a message. As a
result, the bits are interpreted as little endian and an extremely large
allocation is attempted.
This change fixes ping(8)'s communication to casperd(8) on big-endian
architectures.
Reported by: Anton Shterenlikht
Tested by: danfe
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
fields of a private struct such that variables of this type are
initialised correctly. Fixes conversion from ISO 2022.
Also do this in the BIG5 module to prevent similar errors in the future.
- In the libiconv module for EUC-TW replace 2^cs with 1<<cs. Fixes
conversion from EUC-TW.
- Synchronise iconv code with NetBSD. In most cases this only updates
the RCS id because the changes are already there or are NetBSD specific.
+ libc/iconv/citrus_csmapper.c: Add a comment.
+ libc/iconv/citrus_db_factory.c: Remove put16().
+ libc/iconv/citrus_iconv.c: Return EINVAL on error.
+ libc/iconv/citrus_mapper.c: Return EINVAL on error.
+ libc/iconv/citrus_memstream.c: Fix type of a variable.
+ libc/iconv/citrus_prop.h: Sync definition of _CITRUS_PROP_HINT_END.
+ libc/iconv/citrus_stdenc.c: Return EINVAL on error.
+ libiconv_modules/mapper_std/citrus_mapper_std.c: Plug memory leak.
Obtained from: NetBSD
MFC after: 2 weeks
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
are only used on armv6 when the vfp unit is detected. They will also be
available for the upcoming armv6hf platform, however while not used by
default there will need to be defined for any software that calls them
directly.
my tests, it is faster ~20%, even on an old IXP425 533MHz it is ~45%
faster... This is partly due to loop unrolling, so the code size does
significantly increase... I do plan on committing a version that
rolls up the loops again for smaller code size for embedded systems
where size is more important than absolute performance (it'll save ~6k
code)...
The kernel implementation is now shared w/ userland's libcrypt and
libmd...
We drop support for sha256 from sha2.c, so now sha2.c only contains
sha384 and sha512...
Reviewed by: secteam@
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
The previous code failed to return an error condition when the whole input
was invalid due to improper handling of the sscanf return value. Actually,
this failure was properly being caught by a test in
tools/regression/lib/libc/net/test-ether.t but was not noticed because
these tests are never run. (On my way to fixing that ;-)
The fix applied here resembles the implementation of ether_line in NetBSD
modulo the setting of an errno value (which is not documented as an
expectation in the manpage anyway).
New ioctls VM_ISA_ASSERT_IRQ, VM_ISA_DEASSERT_IRQ and VM_ISA_PULSE_IRQ
can be used to manipulate the pic, and optionally the ioapic, pin state.
Reviewed by: jhb, neel
Approved by: neel (co-mentor)
The standard states that GMT must be used, but that UTC is equivalent. Still
parse UTC as otherwise this causes problems for pkg(8). It will refetch
the repository every time 'pkg update' or other remote operations
are used behind these proxies.
RFC2616: "All HTTP date/time stamps MUST be represented in Greenwich Mean
Time (GMT), without exception. For the purposes of HTTP, GMT is exactly equal
to UTC (Coordinated Universal Time).""
Approved by: bapt (mentor)
Reviewed by: des, peter
Sponsored by: EMC / Isilon Storage Division
MFC after: 1 week
drop out dated perf numbers (can't imagine people are still running
Pentium MMX 166's anymore)...
bump date...
drop max length of salt of 8 since _PASSWORD_LEN is now large, 128..
and state the max length of the salt depends upon the module,
sha-{256,512} have a max salt of 16..
recommend 8 characters of salt instead of just 2...
MFC after: 1 week
Make fts_open(3) treat an empty pathname like any other pathname that cannot
be lstatted because of [ENOENT].
It is rather confusing if rm -rf file1 "" file2 does not remove file1 and
file2.
PR: bin/187264
MFC after: 2 weeks
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
print a warning if EPERM is returned as this is an expected failure
mode rather than error -- similar to current handling of ESRCH.
This makes the output of 'procstat -as' vastly more palatable.
MFC after: 3 days
Sponsored by: DARPA, AFRL
Highlights include (upstream revs in parens):
- Improvements to the remote GDB protocol client
(r196610, r197579, r197857, r200072, and others)
- Bug fixes for big-endian targets
(r196808)
- Initial support for libdispatch (GCD) queues in the debuggee
(r197190)
- Add "step-avoid-libraries" setting
(r199943)
- IO subsystem improvements (including initial work on a curses gui)
(r200263)
- Support hardware watchpoints on FreeBSD
(r201706)
- Improved unwinding through hand-written assembly functions
(r201839)
- Handle DW_TAG_unspecified_parameters for variadic functions
(r202061)
- Fix Ctrl+C interrupting a running inferior process
(r202086, r202154)
- Various bug fixes for memory leaks, LLDB segfaults, the C++ demangler,
ELF core files, DWARF debug info, and others.
Sponsored by: DARPA, AFRL
processor-specific VMCS or VMCB. The pending exception will be delivered right
before entering the guest.
The order of event injection into the guest is:
- hardware exception
- NMI
- maskable interrupt
In the Intel VT-x case, a pending NMI or interrupt will enable the interrupt
window-exiting and inject it as soon as possible after the hardware exception
is injected. Also since interrupts are inherently asynchronous, injecting
them after the hardware exception should not affect correctness from the
guest perspective.
Rename the unused ioctl VM_INJECT_EVENT to VM_INJECT_EXCEPTION and restrict
it to only deliver x86 hardware exceptions. This new ioctl is now used to
inject a protection fault when the guest accesses an unimplemented MSR.
Discussed with: grehan, jhb
Reviewed by: jhb
fact I should actually waited the build to be finished before
committing.
A proper fix would be committed once my test build passes.
Pointy hat to: delphij
fields of an internal struct so it corresponds with the way variables of
this type are initialised.
PR: 185964
Submitted by: Manuel Mausz <manuel-freebsd@mausz.at>
MFC after: 5 days
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
all of the features in the current working draft of the upcoming C++
standard, provisionally named C++1y.
The code generator's performance is greatly increased, and the loop
auto-vectorizer is now enabled at -Os and -O2 in addition to -O3. The
PowerPC backend has made several major improvements to code generation
quality and compile time, and the X86, SPARC, ARM32, Aarch64 and SystemZ
backends have all seen major feature work.
Release notes for llvm and clang can be found here:
<http://llvm.org/releases/3.4/docs/ReleaseNotes.html>
<http://llvm.org/releases/3.4/tools/clang/docs/ReleaseNotes.html>
MFC after: 1 month
The 32-bit bootloaders now link against libstand.a in sys/boot/libstand32,
so there is no need to force /usr/lib/libstand.a to be 32-bit.
This is equivalent to r261568 for amd64.
Sponsored by: The FreeBSD Foundation
If rare conditions such as concurrent conflicting manipulation of the
filesystem occur, fts_read() frees the current FTSENT without adjusting
the pointers in the FTS accordingly. A later fts_close() then frees the
same FTSENT again.
Reported by: pho
Tested by: pho
MFC after: 1 week
The 32-bit bootloaders now link against libstand.a in sys/boot/libstand32,
so there is no need to force /usr/lib/libstand.a to be 32-bit.
Sponsored by: The FreeBSD Foundation
device drivers. Recent versions of u-boot run with the MMU enabled, and
require DMA-based I/O to be aligned to cache line boundaries.
These changes are based on a patch originally submitted by Juergen Weiss,
but I reworked them and thus any problems are purely my fault.
Submitted by: "Juergen Weiss" <weiss@uni-mainz.de>
Reviewed by: imp, nwhitehorn, jhb
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
* The RFC says (in section 10.1) that only when extbuf is not NULL,
extlen shall be checked, so don't perform this check when NULL is
passed.
* socklen_t is unsigned, so checking extlen for less than zero is
not needed.
Submitted by: swildner@dragonflybsd.org
Reviewed by: Mark Martinec <Mark.Martinec+freebsd@ijs.si>
Reviewed by: hrs
Obtained by: DragonFlyBSD
the signal second time, by adding the missed else before if statement.
While there, postpone initializing local curthread variable until
passed signal number is checked for validity.
Submitted by: John Wolfe <jlw@xinuos.com>
PR: threads/186309
MFC after: 1 week
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.
MFC after: 1 month
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
MFC after: 4 weeks
Sponsored by: DARPA, AFRL
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
known in advance, or where the caller doesn't care and just keeps
reading until it hits EOF.
In fetch_read(): the socket is non-blocking, so read() will return 0
on EOF, and -1 (errno == EAGAIN) when the connection is still open but
there is no data waiting. In the first case, we should immediately
return 0. The EINTR case was also broken, although not in a way that
matters.
In fetch_writev(): use timersub() and timercmp() as in fetch_read().
In http_fillbuf(): set errno to a sensible value when an invalid chunk
header is encountered.
In http_readfn(): as in fetch_read(), a zero return from down the
stack indicates EOF, not an error. Furthermore, when io->error is
EINTR, clear it (but no errno) before returning so the caller can
retry after dealing with the interrupt.
MFC after: 3 days
simply not trying to return exactly what the caller asked for - just
return whatever we got and let the caller be the judge of whether it
was enough. If an error occurs or the connection times out after we
already received some data, return a short read, under the assumption
that the next call will fail or time out before we read anything.
As it turns out, none of the code that calls fetch_read() assumes an
all-or-nothing result anyway, except for a couple of lines where we
read the CR LF at the end of a hunk in HTTP hunked encoding, so the
changes outside of fetch_read() and http_readfn() are minimal.
While there, replace select(2) with poll(2).
MFC after: 3 days
properly include sys/ headers from the source tree instead of the
host.
These patches are also applied to libdwarf since libdwarf requires
the same sys/ headers as libelf.
device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
