And rename "DEFAULT" constants to the more accurate "MAX."
PR: 210382
Submitted by: Felix <felixphew0 at gmail.com>
Reviewed by: wblock, cem
Tested by: Dave Cottlehuber <dch at skunkwerks.at>
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
The graphic mode is noticeably slow on hypervisors, especially
on Hyper-V (1 second to each line).
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: kib, sephe, royger (early loader version)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5739
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
size as defined by VT_FB_DEFAULT_WIDTH and VT_FB_DEFAULT_HEIGHT
(at this time 2048x1200). The default is really a max. We cap
the height and width to those defaults and position the screen
in the center of the frame buffer.
Ideally we use a bigger font to utility the entire real estate
that is the frame buffer, but that's seen as an improvement over
making it work first.
PR: 193745
horizonal resolution (width). In those cases fb_bpp ended up
completely wrong -- as in 6 bytes per pixel or something like
that. Since we already have a way to calculate fb_depth given
the masks and fb_bpp is effectively the same as fb_depth, all
we need to do is make sure fb_bpp is rounded to the next
multiple of the number of bits in a byte -- we assume we can
divide by the number of bits in a byte throughout vt(4).
While here:
- simplify how we calculate fb_depth.
- use fb_bpp instead of fb_depth to calculate fb_stride;
we know we can divide fb_bpp.
- don't limit fb_width and fb_height by VT_FB_DEFAULT_WIDTH
and VT_FB_DEFAULT_HEIGHT (resp.). Those constants have
not relation to the size of the frame buffer.
This at least fixes "lower-resolution" Macs. We're talking
1280x1024 or so. There still is a problem with 27" Macs,
which typically have a horizontal resolution over 2K.
PR: 193745 (partial)
Ok'd by: emaste@
We first map 64KB at 0xA0000 and then determine whether to work
in text or graphics mode. When graphics mode, the mapping is
precisely what we need and everything is fine. But text mode,
has the frame buffer relocated to 0xB8000. We didn't map that
much to safely add 0x18000 bytes to the base address.
Now we first check whether to work in text or graphics mode and
then map the frame buffer at the right address and with the
right size (0xA0000+64KB for graphics, 0xB8000+32KB for text).
PR: 202276
Tested by: ed@
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
Apologies, this was how it was supposed to land. Mea culpa.
Differential Revision: https://reviews.freebsd.org/D3157
Reviewed by: gnn, hiren
Approved by: markj (mentor)
MFC after: 1 week
This feature is inspired by another Unix-alike OS commonly found on
airplane headrests.
A number of beasties[0] are drawn at top of framebuffer during boot,
based on the number of active SMP CPUs[1]. Console buffer output
continues to scroll in the screen area below beastie(s)[2].
After some time[3] has passed, the beasties are erased leaving the
entire terminal for use.
Includes two 80x80 vga16 beastie graphics and an 80x80 vga16 orb
graphic. (The graphics are RLE compressed to save some space -- 3x 3200
bytes uncompressed, or 4208 compressed.)
[0]: The user may select the style of beastie with
kern.vt.splash_cpu_style=(0|1|2)
[1]: Or the number may be overridden with tunable kern.vt.splash_ncpu.
[2]: https://www.youtube.com/watch?v=UP2jizfr3_o
[3]: Configurable with kern.vt.splash_cpu_duration (seconds, def. 10).
Differential Revision: https://reviews.freebsd.org/D2181
Reviewed by: dumbbell, emaste
Approved by: markj (mentor)
MFC after: 2 weeks
Explicitly mark existing VT_SYSCTL_INTs static. This is in preparation for
D2181.
Reviewed by: dumbbell, emaste
Approved by: markj (mentor)
MFC after: 1 week
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
and is not applicable unless the integer pointer is NULL. Set it to
zero to avoid confusion. While at it remove extra semicolon at the end
of the "VT_SYSCTL_INT()" macro.
MFC after: 1 week
function. This fixes an issue where X11 keyboard input can appear
stuck. The cause of the problem is a duplicate TTY device window
switch IOCTL during boot, which leaves the "vt_switch_timer" running,
because the current window is already selected. While at it factor out
some NULL checks.
PR: 200032
Differential Revision: https://reviews.freebsd.org/D2480
Reported by: several people
MFC after: 1 week
Reviewed by: emaste
Previously the mask wrapped when one or more of the mask bytes extended
past the right edge of the window. Simplify the logic and use the same
byte offset and bit in both the pattern and mask.
PR: 199648
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2360
On one of my systems FreeBSD will fail to boot because vt_vga gets stuck
waiting for the vertical retrace if there's no monitor attached. Fix this by
adding a timeout and exiting if the vertical retrace times out.
Sponsored by: Citrix Systems R&D
Reviewed by: emaste, dumbbell
Differential Revision: https://reviews.freebsd.org/D2397
vt_is_cursor_in_area needs to return true if any part of the mouse
cursor is visible in the rectangle area. Replace the existing test with
a simpler version of a test for overlapping rectangles.
Differential Revision: https://reviews.freebsd.org/D2356
Reviewed by: ray
Sponsored by: The FreeBSD Foundation
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.
The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
The main purpose of this feature is to be able to unload a KMS driver.
When going back from the current vt(4) backend to the previous backend,
the previous backend is reinitialized with the special VDF_DOWNGRADE
flag set. Then the current driver is terminated with the new "vd_fini"
callback.
In the case of vt_fb and vt_vga, this allows the former to pass the
vgapci device vt_fb used to vt_vga so the device can be rePOSTed.
Differential Revision: https://reviews.freebsd.org/D687
This is to avoid a witness warning about a waiting memory allocation in
the evnt hanlder registration code.
Reported by: markj
MFC after: 3 days
X-MFC with: r277795
especially on native monitor resolutions. This one essentially matches X11
default pointer.
Differential Revision: https://reviews.freebsd.org/D1801
No objection from: emaste
Approved by: adrian, dumbbell
Without this change a local attacker could trigger a panic by
tricking the kernel into accessing undefined kernel memory.
We would like to acknowledge Francisco Falcon from CORE Security
Technologies who discovered the issue and reported to the
FreeBSD Security Team.
More information can be found at CORE Security's advisory at:
http://www.coresecurity.com/content/freebsd-kernel-multiple-vulnerabilities
This is an errata candidate for releng/10.1 and releng/9.3. Earlier
releases are not affected.
Reported by: Francisco Falcon from CORE Security Technologies
Security: CVE-2014-0998
Reviewed by: dumbbell
MFC after: 3 days
Also, split power_suspend into power_suspend and power_suspend_early.
power_suspend_early is called before the userland is frozen.
power_suspend is called after the userland is frozen.
Currently only VT switching is hooked to power_suspend_early.
This is needed because switching away from X server requires its
cooperation, so obviously X server must not be frozen when that happens.
Freezing userland during ACPI suspend is useful because not all drivers
correctly handle suspension concurrent with other activity. This is
especially applicable to drivers ported from other operating systems
that suspend all software activity between placing drivers and hardware
into suspended state.
In particular drm2/radeon (radeonkms) depends on the described
procedure. The driver does not have any internal synchronization
between suspension activities and processing of userland requests.
Many thanks to kib for the code that allows to freeze and thaw all
userland threads.
Note that ideally we also need to park / inhibit (non-special) kernel
threads as well to ensure that they do not call into drivers.
MFC after: 17 days
suspend/resume
The goal is to avoid that the vt(4) resume happens before the video
display is resumed. The original patch was provided by Andriy Gapon.
This new patch registers the handlers in vt_upgrade(). This is done
once, thanks to the VDF_ASYNC flag. I abused this flag because it was
already abused by the keyboard allocation. The event handlers then call
the backend if it provides callbacks for suspend/resume.
Differential Revision: https://reviews.freebsd.org/D1004
On behalf of: dumbbell
MFC after: 2 weeks
which prevents us from doing a "callout_drain()" call. The callout in
question has a lock associated with it and we are not freeing the
callout. That means we can use the "callout_stop()" function to
atomically stop the callback iff the "callout_stop()" function is
called locked. This patch applies proper locking to "callout_stop()"
and replaces a "callout_drain()" with a "callout_stop()".
MFC after: 1 week
Revert the EFI part of r276064 until I can test it properly on a real EFI
system. This was causing problems to people booting using UEFI and vt.
Reported by: O. Hartmann <ohartman@zedat.fu-berlin.de>
Current VT drivers don't register the memory regions they use with the
nexus. This patch makes vt_vga and vt_efifb register the memory regions they
use.
This is needed (at least) for Xen support, since the FreeBSD kernel will try
to use the holes in the memory map to map memory from other domains and
setup it's grant table.
Sponsored by: Citrix Systems R&D
Reported by: sbruno
Tested by: emaste
Reviewed by: ray
PR: 195537
Differential Revision: https://reviews.freebsd.org/D1291
Therefore, to set histry size to 2000 lines, add the following line to
your kernel configuration file:
options SC_HISTORY_SIZE=2000
The default history remains at 500 lines.
MFC after: 1 week
The problem was that only the kbdmux keyboard index was saved in
vd->vd_keyboard. This index is -1 when kbdmux isn't used. In this
case, the keyboard was correctly allocated, but the returned index was
discarded.
PR: 194718
MFC after: 1 week
