Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...
X-MFC: never
Reviewed by: bz
Approved by: gnn(mentor)
Obtained from: NETASQ
cksum related function calls, sometimes related to offload features
from what I could see.xi
It would be good if the offload functionality would be properly
#ifdefed but the other calls to cksum related functions are a more
general problem also elswhere in the network stack.
use IPv4/v6 for inter-node communication (according to my reading).
Properly wrap the carp callouts in INET || INET6 and refelect this
in sys/conf/files as well. While in theory this should be ok,
it might be a bit optimistic to think that carp could build with
inet6 only[1].
Discussed with: mlaier [1]
- Preallocate some memory for ACPI tasks early enough. We cannot use
malloc(9) any more because spin mutex may be held here. The reserved
memory can be tuned via debug.acpi.max_tasks tunable or ACPI_MAX_TASKS
in kernel configuration. The default is 32 tasks.
- Implement a custom taskqueue_fast to wrap the new memory allocation.
This implementation is not the fastest in the world but we are being
conservative here.
be nfs_nfsdport.c and nfs_nfsdcache.c are the problem only but we need
to mark all or we will run into problems at link time.
One is because of calling an INET specific function, the other is
because of VIMAGE putting all tcp* into struct vnet_inet.
Both are general problems throughout the entire stack and not a fault
of the NFS implementation and will need to be addressed in the future.
#error "Huh? if_gre without inet?"
According to my reading we still only support encapsulating datagrams
into IPv4 and not IPv6 so there is no optional | gre inet6 yet.
controller. These controllers are also known as L1C(AR8131) and
L2C(AR8132) respectively. These controllers resembles the first
generation controller L1 but usage of different descriptor format
and new register mappings over L1 register space requires a new
driver. There are a couple of registers I still don't understand
but the driver seems to have no critical issues for performance and
stability. Currently alc(4) supports the following hardware
features.
o MSI
o TCP Segmentation offload
o Hardware VLAN tag insertion/stripping
o Tx/Rx interrupt moderation
o Hardware statistics counters(dev.alc.%d.stats)
o Jumbo frame
o WOL
AR8131/AR8132 also supports Tx checksum offloading but I disabled
it due to stability issues. I'm not sure this comes from broken
sample boards or hardware bugs. If you know your controller works
without problems you can still enable it. The controller has a
silicon bug for Rx checksum offloading, so the feature was not
implemented.
I'd like to say big thanks to Atheros. Atheros kindly sent sample
boards to me and answered several questions I had.
HW donated by: Atheros Communications, Inc.
For a slightly thorough explaination, please refer to
[1] http://people.freebsd.org/~ariff/SOUND_4.TXT.html .
Summary of changes includes:
1 Volume Per-Channel (vpc). Provides private / standalone volume control
unique per-stream pcm channel without touching master volume / pcm.
Applications can directly use SNDCTL_DSP_[GET|SET][PLAY|REC]VOL, or for
backwards compatibility, SOUND_MIXER_PCM through the opened dsp device
instead of /dev/mixer. Special "bypass" mode is enabled through
/dev/mixer which will automatically detect if the adjustment is made
through /dev/mixer and forward its request to this private volume
controller. Changes to this volume object will not interfere with
other channels.
Requirements:
- SNDCTL_DSP_[GET|SET][PLAY|REC]_VOL are newer ioctls (OSSv4) which
require specific application modifications (preferred).
- No modifications required for using bypass mode, so applications
like mplayer or xmms should work out of the box.
Kernel hints:
- hint.pcm.%d.vpc (0 = disable vpc).
Kernel sysctls:
- hw.snd.vpc_mixer_bypass (default: 1). Enable or disable /dev/mixer
bypass mode.
- hw.snd.vpc_autoreset (default: 1). By default, closing/opening
/dev/dsp will reset the volume back to 0 db gain/attenuation.
Setting this to 0 will preserve its settings across device
closing/opening.
- hw.snd.vpc_reset (default: 0). Panic/reset button to reset all
volume settings back to 0 db.
- hw.snd.vpc_0db (default: 45). 0 db relative to linear mixer value.
2 High quality fixed-point Bandlimited SINC sampling rate converter,
based on Julius O'Smith's Digital Audio Resampling -
http://ccrma.stanford.edu/~jos/resample/. It includes a filter design
script written in awk (the clumsiest joke I've ever written)
- 100% 32bit fixed-point, 64bit accumulator.
- Possibly among the fastest (if not fastest) of its kind.
- Resampling quality is tunable, either runtime or during kernel
compilation (FEEDER_RATE_PRESETS).
- Quality can be further customized during kernel compilation by
defining FEEDER_RATE_PRESETS in /etc/make.conf.
Kernel sysctls:
- hw.snd.feeder_rate_quality.
0 - Zero-order Hold (ZOH). Fastest, bad quality.
1 - Linear Interpolation (LINEAR). Slightly slower than ZOH,
better quality but still does not eliminate aliasing.
2 - (and above) - Sinc Interpolation(SINC). Best quality. SINC
quality always start from 2 and above.
Rough quality comparisons:
- http://people.freebsd.org/~ariff/z_comparison/
3 Bit-perfect mode. Bypasses all feeder/dsp effects. Pure sound will be
directly fed into the hardware.
4 Parametric (compile time) Software Equalizer (Bass/Treble mixer). Can
be customized by defining FEEDER_EQ_PRESETS in /etc/make.conf.
5 Transparent/Adaptive Virtual Channel. Now you don't have to disable
vchans in order to make digital format pass through. It also makes
vchans more dynamic by choosing a better format/rate among all the
concurrent streams, which means that dev.pcm.X.play.vchanformat/rate
becomes sort of optional.
6 Exclusive Stream, with special open() mode O_EXCL. This will "mute"
other concurrent vchan streams and only allow a single channel with
O_EXCL set to keep producing sound.
Other Changes:
* most feeder_* stuffs are compilable in userland. Let's not
speculate whether we should go all out for it (save that for
FreeBSD 16.0-RELEASE).
* kobj signature fixups, thanks to Andriy Gapon <avg@freebsd.org>
* pull out channel mixing logic out of vchan.c and create its own
feeder_mixer for world justice.
* various refactoring here and there, for good or bad.
* activation of few more OSSv4 ioctls() (see [1] above).
* opt_snd.h for possible compile time configuration:
(mostly for debugging purposes, don't try these at home)
SND_DEBUG
SND_DIAGNOSTIC
SND_FEEDER_MULTIFORMAT
SND_FEEDER_FULL_MULTIFORMAT
SND_FEEDER_RATE_HP
SND_PCM_64
SND_OLDSTEREO
Manual page updates are on the way.
Tested by: joel, Olivier SMEDTS <olivier at gid0 d org>, too many
unsung / unnamed heroes.
in Freescale system-on-chip devices.
The following algorithms and schemes are currently supported:
- 3DES, AES, DES
- MD5, SHA1, SHA256, SHA384, SHA512
Reviewed by: philip
Obtained from: Freescale, Semihalf
adjust conf/files and modules' Makefiles accordingly.
No code or ABI changes so this and most of previous related
changes can be easily MFC'ed
MFC after: 5 days
Clists were originally used by the TTY layer as a text buffer interface.
The advantage of clists were that it would allocate a small set of
additional buffers that could be shared between TTYs when needed. In
the modern days we can just allocate some more KBs of memory to keep the
TTYs satisfied. The global cfreelist also requires synchronisation,
which may not be useful when trying to improve scalability.
The MPSAFE TTY layer uses its own text buffers (ttyinq and ttyoutq). We
had a small amount of drivers in the tree that still uses clists, like
the old USB stack and some keyboard drivers. With the old USB stack gone
and the keyboard drivers changed to use a circular buffer, we can safely
remove clists from the kernel.
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
Each list describes a logical memory object that is backed by one or more
physical address ranges. To minimize locking, the sglist objects
themselves are immutable once they are shared.
These objects may be used in the future to facilitate I/O requests using
physically-addressed buffers. For the immediate future I plan to use them
to implement a new type of VM object and pager.
Reviewed by: jeff, scottl
MFC after: 1 month
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
as there is no more space for more SOL_SOCKET options, but this option also
fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
functionality (currently only unjail root can use it).
Discussed with: julian, adrian, jhb, rwatson, kmacy
Introduce for this operation the reverse NO_ADAPTIVE_SX option.
The flag SX_ADAPTIVESPIN to be passed to sx_init_flags(9) gets suppressed
and the new flag, offering the reversed logic, SX_NOADAPTIVE is added.
Additively implements adaptive spininning for sx held in shared mode.
The spinning limit can be handled through sysctls in order to be tuned
while the code doesn't reach the release, after which time they should
be dropped probabilly.
This change has made been necessary by recent benchmarks where it does
improve concurrency of workloads in presence of high contention
(ie. ZFS).
KPI breakage is documented by __FreeBSD_version bumping, manpage and
UPDATING updates.
Requested by: jeff, kmacy
Reviewed by: jeff
Tested by: pho
includes support for NFSv4. The subsystem can optionally be linked
into the kernel using the two options:
NFSCL - the client
NFSD - the server
It is also built as three modules:
nfscl - the client
nfsd - the server
nfscommon - functions shared by the client and server
Approved by: kib (mentor)
The hypervisor doesn't provide a single "TOD" - it instead provides a
"start time" and a "running time". These are added together to form
the current TOD. The TOD is in UTC.
This RTC is only (initially) designed to be read at startup. There's
some further poking that needs to happen to pick up hypervisor time
changes (ie, by the Dom0 time being adjusted by something). This
time adjustment currently can cause "weird stuff" in the DomU clock;
I'll begin investigating and repairing that in subsequent commits.
PR: 135008
Add support for kernel fault injection using KFAIL_POINT_* macros and
fail_point_* infrastructure. Add example fail point in vfs_bio.c to
simulate VM buf pressure.
Approved by: dfr (mentor)
get a quick snapshot of the kernel's symbol table including the symbols
from any loaded modules (the symbols are all merged into one symbol
table). Unlike like other implementations, this ksyms driver maps
memory in the process memory space to store the snapshot at the time
/dev/ksyms is opened. It also checks to see if the process has already
a snapshot open and won't allow it to open /dev/ksyms it again until it
closes first. This prevents kernel and process memory from being
exhausted. Note that /dev/ksyms is used by the lockstat(1) command.
Reviewed by: gallatin kib (freebsd-arch)
Approved by: gnn (mentor)
adds probes for mutexes, reader/writer and shared/exclusive locks to
gather contention statistics and other locking information for
dtrace scripts, the lockstat(1M) command and other potential
consumers.
Reviewed by: attilio jhb jb
Approved by: gnn (mentor)
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.
The kernel option is left for a transition period, marked deprecated,
and will be removed soon.
Initially requested by: phk (1 year 1 day ago)
MFC after: 4 weeks
