active network stack instance. Turning on options VIMAGE at compile
time yields the following changes relative to default kernel build:
1) V_ accessor macros for virtualized variables resolve to structure
fields via base pointers, instead of being resolved as fields in global
structs or plain global variables. As an example, V_ifnet becomes:
options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet
default build: vnet_net_0._ifnet
options VIMAGE_GLOBALS: ifnet
2) INIT_VNET_* macros will declare and set up base pointers to be used
by V_ accessor macros, instead of resolving to whitespace:
INIT_VNET_NET(ifp->if_vnet); becomes
struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET];
3) Memory for vnet modules registered via vnet_mod_register() is now
allocated at run time in sys/kern/kern_vimage.c, instead of per vnet
module structs being declared as globals. If required, vnet modules
can now request the framework to provide them with allocated bzeroed
memory by filling in the vmi_size field in their vmi_modinfo structures.
4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are
extended to hold a pointer to the parent vnet. options VIMAGE builds
will fill in those fields as required.
5) curvnet is introduced as a new global variable in options VIMAGE
builds, always pointing to the default and only struct vnet.
6) struct sysctl_oid has been extended with additional two fields to
store major and minor virtualization module identifiers, oid_v_subs and
oid_v_mod. SYSCTL_V_* family of macros will fill in those fields
accordingly, and store the offset in the appropriate vnet container
struct in oid_arg1.
In sysctl handlers dealing with virtualized sysctls, the
SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target
variable and make it available in arg1 variable for further processing.
Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have
been deleted.
Reviewed by: bz, rwatson
Approved by: julian (mentor)
SIGINFO). Provides some progress report for the impatient. This
won't report that we're blocking in our walk due to disk/network
problems, however. There's no really good way to report that
condition that I'm aware of...
Feature is controlled by hint.ata.X.pm_level tunable:
0 - PM disabled, old behaviour, default.
1 - device is allowed to initiate PM state change, host is passive.
2 - host initiates PARTIAL state transition every time port is idle.
3 - host initiates SLUMBER state transition every time port is idle.
PARTIAL state has up to 100us (50us for me) wakeup latency, but for my
ICH8M saves 0.5W of power per drive. SLUMBER state has up to 10ms (3.5ms
for me) wakeup latency, but saves 0.8W of power.
Modes 2 and 3 are implemented only for AHCI driver now.
Interface power management is incompatible with device presence detection
(host receives no signal from drive, so unable to monitor it), so later is
disabled when PM is used.
interface as nmount(2). Three new system calls are added:
* jail_set, to create jails and change the parameters of existing jails.
This replaces jail(2).
* jail_get, to read the parameters of existing jails. This replaces the
security.jail.list sysctl.
* jail_remove to kill off a jail's processes and remove the jail.
Most jail parameters may now be changed after creation, and jails may be
set to exist without any attached processes. The current jail(2) system
call still exists, though it is now a stub to jail_set(2).
Approved by: bz (mentor)
import from p4 bms_netdev. Summary of changes:
* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.
NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.
This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.
This has the effect that IPv6 multicast traffic won't trigger
an SPI allocation when IPSEC is in use, however, this obviously
needs to stomp on locks, and IN6_LOOKUP_MULTI() is about to go away.
This definitely needs to be revisited before 8.x is branched as
a release branch.
for use by MLDv2.
Add IPv6 SSM socket layer membership vector size constants and
tree bounds.
Remove unreferenced struct ipv6_mreq_source; SSM for IPv6 goes
straight to the RFC 3678 socket options.
incorrectly output, if the RB-tree enumeration happened to reuse the
same chain for a mode switch: that is, both ALLOW and BLOCK records
were appended for the same group, in the same mbuf packet chain.
This was introduced during an mbuf chain layout bug fix involving
m_getptr(), which obviously cannot count from offset 0 on the
second pass through the RB-tree when serializing the IGMPv3
group records into the pending mbuf chain.
Cut over to KTR_INET for IGMPv3 CTR usage.
the kernel will return in msfr_nsrcs the number of source filters
in-mode for a given multicast group.
However, the filters themselves were never copied out, as the libc
function clobbers this field with zero, causing the kernel to assume
the provided vector of struct sockaddr_storage has zero length.
This bug would only affect users of SSM multicast, which is shimmed
in 7.x.
Picked up during mtest(8) refactoring.
MFC after: 1 day
respectively, as placeholder for future use of CTR() by
the networking code (MLDv2 will be going in shortly).
Mark KTR_SPARE* as being used in fact by cxgb (picked up
on a 'make universe' run).
topology of nehalem/corei7 based systems.
- Remove the cpu_cores/cpu_logical detection from identcpu.
- Describe the layout of the system in cpu_mp_announce().
Sponsored by: Nokia
and it only optimized out an ipi or mwait in very few cases.
- Skip the adaptive idle code when running on SMT or HTT cores. This
just wastes cpu time that could be used on a busy thread on the same
core.
- Rename CG_FLAG_THREAD to CG_FLAG_SMT to be more descriptive. Re-use
CG_FLAG_THREAD to mean SMT or HTT.
Sponsored by: Nokia
root cpuset of that jail.
Processes inside the jail will still be able to change child sets.
A superuser outside of a jail will still be able to change the jail cpuset
and thus limit the number of cpus available to the jail.
Problem reported by: 000.fbsd@quip.cz (Miroslav Lachman)
PR: kern/134050
Reviewed by: jeff
MFC after: 3 weeks
X-MFC: backout r191596
- Add some missing const.
- Move the size of the window spun by the registers to the softc
as neither using va_mem_size for this nor va_mem_base for the
start of the bus addresses is appropriate.
MFC after: 1 week
to if (len == 0).
The length is supposed to be unsigned, so len - 1 < 0 won't happen except
if len == 0 anyway, and it would return 0 when it shouldn't, if len was
> INT_MAX.
Spotted out by: Channa <channa kad gmail com>
This change adds (possibly redundant) early check for invalid
state input parameter (including S0). Handling of S5 request
is reduced to simply calling shutdown_nice(). As a result
control flow of acpi_EnterSleepState is somewhat simplified
and resume/backout half of the function is not executed
for S5 (soft poweroff) request and invalid state requests.
Note: it seems that shutdown_nice may act as nop when initproc
is already initialized (to grab pid of 1), but init process is in
"pre-natal" state.
Tested by: Fabian Keil <fk@fabiankeil.de>
Reviewed by: njl, jkim
Approved by: rpaulo
arbitrary commands (outside the jail) associated with said events,
e.g. to bring up/down CARP interfaces representing services run in
jails.
Reviewed by: simon