Also fix bad whitespace in sort_unique after r314809.
The parse_path syntax error came up in DIRDEPS_BUILD as the following
and emptied out all Makefile.depend files due to it:
# python share/mk/meta2deps.py
File "share/mk/meta2deps.py", line 538
rdir = os.path.realpath(dir)
^
IndentationError: unexpected indent
Sponsored by: Dell EMC Isilon
The closing paren for the list of architectures that should enable LIB32
by default was in the wrong place resulting in LIB32 always be enabled on
mips64 regardless of WITH_LIB32/WITHOUT_LIB32.
Submitted by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Obtained from: CheriBSD
Sponsored by: DARPA / AFRL
When the input to csplit contains fewer lines than the number of matches
specified, extra output was mistakenly included in some output files.
Fix the bug and add a simple ATF regression test.
PR: 219024
Submitted by: J.R. Oldroyd <fbsd at opal.com>
size is already set to something other than zero. It's supposed to be
called from eg /etc/profile - it's not neccessary to query terminal
size when logging in over the network, because the protocol used already
takes care of this, but it's neccessary when logging over a serial line.
Reviewed by: cem, Daniel O'Connor <darius@dons.net.au>
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10637
The NFSv4 protocol doesn't use the Mount protocol, so it doesn't make sense
to add an entry for an NFSv4 mount to /var/db/mounttab. Also, r308871
modified umount so that it doesn't remove any entry created by mount_nfs.
Reported on freebsd-current@.
Reported by: clbuisson@orange.fr
MFC after: 2 weeks
Summary:
The Ubiquiti Unifi Security Gateway is virtually identical to the
EdgeRouter Lite, with a smaller PCB and apparently a different board identifier.
Simply adding the new board identifier alongside the ERL identifier, FreeBSD
boots successfully, and can access the needed peripherals (tested with USB
booting, and basic pings on one ethernet interface)
Reviewed By: adrian
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10639
lease file.
Some routers set very large values for rebind time (Netgear) and these
are erroneously reported as negative in the leasefile. This was due to a
wrong printf format specification of %ld for an unsigned long on 32-bit
platforms.
They would overflow a signed 32-bit time_t on 32 bit architectures. This
was taken care of, but a compiler optimisation makes this behave
erratically. This could be resolved by adding a -fwrapv flag, but
instead we can check the value before adding the current timestamp to
it.
In the lease file values are still wrong though:
option dhcp-rebinding-time -644245096;
PR: 218980
Reported by: Bob Eager
MFC after: 2 weeks
Attempt to catch up to the KPI changes from r292373, and perform
some other tidying while in the area.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D10579
for "unable to parse response" error which happens when youre typing
too fast for the machine you're running it on.
Reviewed by: cem, Daniel O'Connor <darius@dons.net.au>
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10624
When running the vnet init code (pf_load_vnet()) we used to iterate over
all vnets, marking them as unhooked.
This is incorrect and leads to panics if pf is unloaded, as the unload
code does not unregister the pfil hooks (because the vnet is marked as
unhooked).
There's no need or reason to touch other vnets during initialisation.
Their pf_load_vnet() function will be triggered, which handles all
required initialisation.
Reviewed by: zec, gnn
Differential Revision: https://reviews.freebsd.org/D10592
When sosend() replies ERESTART in the client side krpc, it indicates that
the RPC message hasn't yet been sent and that the send queue is full or
locked while a signal is posted for the process.
Without this patch, this would result in a RPC_CANTSEND reply from
clnt_vc_call(), which would cause clnt_reconnect_call() to create a new
TCP transport connection. For most NFS servers, this wasn't a serious problem,
although it did imply retries of outstanding RPCs, which could possibly
have missed the DRC.
For an NFSv4.1 mount to AmazonEFS, this caused a serious problem, since
AmazonEFS often didn't retain the NFSv4.1 session and would reply with
NFS4ERR_BAD_SESSION. This implies to the client a crash/reboot which
requires open/lock state recovery.
Three options were considered to fix this:
- Return the ERESTART all the way up to the system call boundary and then
have the system call redone. This is fraught with risk, due to convoluted
code paths, asynchronous I/O RPCs etc. cperciva@ worked on this, but it
is still a work in prgress and may not be feasible.
- Set SB_NOINTR for the socket buffer. This fixes the problem, but makes
the sosend() completely non interruptible, which kib@ considered
inappropriate. It also would break forced dismount when a thread
was blocked in sosend().
- Modify the retry loop in clnt_vc_call(), so that it loops for this case
for up to 15sec. Testing showed that the sosend() usually succeeded by
the 2nd retry. The extreme case observed was 111 loop iterations, or
about 100msec of delay.
This third alternative is what is implemented in this patch, since the
change is:
- localized
- straightforward
- forced dismount is not broken by it.
This patch has been tested by cperciva@ extensively against AmazonEFS.
Reported by: cperciva
Tested by: cperciva
MFC after: 2 weeks
Ensure showbase does not overflow do_put buffers
Summary:
In https://bugs.freebsd.org/207918, Daniel McRobb describes how using
std::showbase with ostreams can cause truncation of unsigned long long
when output format is octal. In fact, this can even happen with
unsigned int and unsigned long.
To ensure this does not happen, add one additional character to the
do_put buffers if std::showbase is on. Also add a test case.
Reviewers: EricWF, mclow.lists
Reviewed By: EricWF
Subscribers: cfe-commits, emaste
Differential Revision: https://reviews.llvm.org/D32670
PR: 207918
MFC after: 3 days
The current read from network is working from up to down - we have some
protocol needing the data from the network, so we build the buffer space
for that protocol, add the extra space for headers and pass this buffer
down to be filled by nif get call in hope, we have guessed the incoming
packet size right. Amazingly enough this approach mostly does work, but
not always...
So, this update does work from down to up - we allocate buffer (based
on MTU or frame size info), fill it up, and pass on for upper layers.
The obvious problem is that when we should free the buffer - if at all.
In the current implementation the upper layer will free the packet on error
or when the packet is no longer needed.
While working on the issue, the additional issue did pop up - the bios
implementation does not have generic get/put interface but is using pxe
udpsend/udpreceive instead. So the udp calls are gone and undi interface
is implemented instead. Which in turn means slight other changes as we
do not need to have duplicated pxe implementation and can just use dev_net.
To align packet content, the actual read from nic is using shifted buffer by
ETHER_ALIGN (2).
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10232
Don't use DHCP 150 option to decide which protocol use to netboot. When
root-path includes ip address - go thru NFS, if ip address not exists in
root-path - go thru TFTP from server which ip address is in next-server. But
there is one limitation - only one tftp server in network to provide loader and
everything else. Does enybody use more than only one?
Submitted by: kczekirda
Sponsored by: Oktawave
MFC after: 3 weeks
Relnote: Yes
Differential Revision: https://reviews.freebsd.org/D8740
Among new things it is now threaded by default, use zstd -T# to chose the
number of threads not that -T0 will automatically determine the number of
threads based on the number of CPU online.
* Target module have ic plus etherswitch ip175c.
* Also add etherswitch support code on rt driver.
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10336
This code base on lpc code. Ralink RT1310 is oem from 5V Technologies.
RT1310 is ARM926EJS(arm5t).
Tested:
* Buffalo WZR2-G300N
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D7238
Tested:
* on IOData WN-G300R. may be same as Sitecom WLR-2100.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10621
* use ifqmaxlen
* handle (inefficiently for now) meeting padding and alignment requirements for
transmit mbufs.
* change how TX ring handling is done
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Differential Revision: https://reviews.freebsd.org/D10557
Add workaround mii access because of rt1310 is hang up on etherswitch mii poll.
And FDT away on arm platform.
Tested:
* wzr2-g300n
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10295
