- Use ums lock as evdev lock
- Do not cap axes values to sysmouse limits for evdev reports
- Do not map T-axis events to buttons for evdev reports
- Use shortcuts for event reporting
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after: 1 week
Add wrappers around generic evdev_push_event for specific event types:
EV_KEY/EV_REL/EV_ABS etc...
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Hide dialog specific code behind HAVE_DIALOG. It allows to build a stripped
down version (missing the dialog UI) but perfectly function tzsetup when
world is built WITHOUT_DIALOG
Reorganise a bit the code to limit the number of blocks under HAVE_DIALOG
Reviewed by: emaste
Sponsored by: https://reviews.freebsd.org/D8325
object tree should be used instead of sources and headers from the
already installed source tree on the build host.
This was noticed while addressing issues in the upcoming amd update.
MFC after: 2 weeks
"product vendor". This is consistent with how it's generally done.
The ordering is visible eg in usbconfig(8) output.
Note to self: MFC this to 9 and 8.
Reviewed by: hselasky@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8258
There are various new options, documented in the man page, to send the
daemon's standard output and/or standard error to a file or to syslog.
Submitted by: ank at iki.fi
Reviewed by: wblock (man page only)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D7993
The driver currently supports chips that are fully compliant with the
JEDEC SPD / EEPROM / TS standard (JEDEC Standard 21-C,
TSE2002 Specification, frequenlty referred to as JEDEC JC 42.4).
Additionally some chips from STMicroelectronics are supported as well.
They are compliant except for their Device ID pattern.
Given the continued lack of any common sensor infrastructure, the driver
uses an ad-hoc sysctl to report the temperature.
Reviewed by: wblock (documentation)
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8174
If the device tree doesn't contain a cpu-handle field in any bman-portal or
qman-portal, it will exit without setting up the devinfo, leaving it
uninitialized. This will lead to attempts to free random memory, and ultimately
panic.
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
libc++'s stddef.h includes an existing definition of max_align_t for
C++11, but it is only defined for C++, not for C. In addition, GCC and
clang both define an alternate version of max_align_t that uses a
union of multiple types rather than a plain long double as in libc++.
This adds a __max_align_t to <sys/_types.h> that matches the GCC and
clang definition that is mapped to max_align_t in <stddef.h>.
PR: 210890
Reviewed by: dim
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8194
Currently, '/etc/rc.d/swaplate stop' removes all swap devices. This can be
very slow and may not even be possible if there is a lot of swap space in
use. However, removing swap devices is only needed for late swap devices
that may depend on daemons that subsequent shutdown steps stop. Normal swap
devices such as hard disk partitions will remain available throughout the
shutdown process and need not be removed.
In swapoff, interpret -aL to remove late swap devices only, and use this in
etc/rc.d/swaplate. The meaning of -aL in swapon remains unchanged (add all
swap devices, both normal and late).
PR: 187081
Reviewed by: wblock (man page only), ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8126
after r307676, which added transformation rules for .llo and .bco files.
These suffixes also have to be added the the global .SUFFIXES target,
otherwise the various suffix-transformation rules would be interpreted
as literal targets. E.g.,
.c.bco:
... commands ...
would actually to build a file named ".c.bco".
In r307684, I changed rescan_or_reset_bus() to bzero stack-allocated CCBs
before sending them to the kernel because there was stack garbage in there
that wound up meaning that bogus CCB flags were set.
While this fixed the 'camcontrol rescan all' case (XPT_DEV_MATCH CCBs were
failing previously), it broke the 'camcontrol rescan 0' (or any other
number) case when INVARIANTS are turned on. Rescanning a single bus
reliably produced an assert in cam_periph_runccb():
panic: cam_periph_runccb: ccb=0xfffff80044ffe000, func_code=0x708, flags=0xffffdde0
The flags values don't make sense from the code. Changing the CCBs in
rescan_or_reset_bus() from stack to heap allocated avoids the problem.
It would be better to understand why userland stack allocated CCBs don't
work properly, since there may be other code that breaks if stack allocated
CCBs don't work.
sbin/camcontrol/camcontrol.c:
In rescan_or_reset_bus(), allocate the CCBs using malloc(3) instead
of on the stack to avoid an assertion in cam_periph_runccb().
MFC after: 3 days
Sponsored by: Spectra Logic
In sendit(), if mp->msg_control is present, then in sockargs() we are
allocating mbuf to store mp->msg_control. Later in kern_sendit(), call
to getsock_cap(), will check validity of file pointer passed, if this
fails EBADF is returned but mbuf allocated in sockargs() is not freed.
Made code changes to free the same.
Since freeing control mbuf in sendit() after checking (control != NULL)
may lead to double freeing of control mbuf in sendit(), we can free
control mbuf in kern_sendit() if there are any errors in the routine.
Submitted by: Lohith Bellad <lohith.bellad@me.com>
Reviewed by: glebius
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D8152
handling. Ensure that:
* Protocol unreachable errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Communication prohibited errors are handled by indicating ECONNREFUSED
to the TCP user for both IPv4 and IPv6. These were ignored for IPv6.
* Hop Limited exceeded errors are handled by indicating EHOSTUNREACH
to the TCP user for both IPv4 and IPv6.
For IPv6 the TCP connected was dropped but errno wasn't set.
Reviewed by: gallatin, rrs
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: 7904
Currently the network change is simulated by link status changes.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8295
These two ALU instructions first appeared on Linux. Then, libpcap adopted
and made them available since 1.6.2. Now more platforms including NetBSD
have them in kernel. So do we.
--이 줄 이하는 자동으로 제거됩니다--
