The primary purpose is to call nmount() in a loop with new iovec's so
free_iovec takes arguments by reference and resets their values.
Reviewed by: cem
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8513
feature_barrier and feature_flush variables. Otherwise, adjacent
variables on the stack, such as sector_size, may be overwritten, with
disastrous results.
Note that I did not see a good reason to revert the addition of zero
checks introduced in r310013. Better safe than sorry.
PR: 215209
Tested by: royger
MFC after: 3 days
The MCA taskqueue is not initialized until some time after CMCIs are
enabled on the BSP.
Reviewed by: cem, jhb
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8783
in this file actually described the operation of the swap pager, not the
default pager. Given that this is the wrong place to discuss the
implementation of the swap pager, it shouldn't come as a surprise that as
the swap pager evolved these comments became increasingly stale. In
addition, apply some style fixes, like modernizing a few remaining old-
style function definitions.
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8781
Without this change, every individual FEATURE() declaration would have
an individual metric in Prometheus. Though this wouldn't be harmful, it
would look very cluttered.
By letting it use a single metric with the name of the feature attached
as a label, it also becomes easier to search, as you can apply regex
matching, etc.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
This way it becomes possible to graph a property for all instances of a
single driver. For example, graphing the number of packets across all
USB controllers, the amount of dropped packets on all NICs, etc.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
In order to make Prometheus do graphing/alerting on thermal sensors in a
generic fashion, we should attach the name of the thermal zone device as
a label. That way there is only a single metric for the temperature of a
thermal zone, with its name attached as a label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
Sysctls like kern.eventtimer.et.*.quality currently embed the name of
the clock device. This is problematic for the Prometheus metrics
exporter for two reasons:
- Some of those clocks have dashes in their names, which Prometheus
doesn't allow to be used in metric names.
- It doesn't allow for extracting the same property of all clocks on the
system from within a single query.
Attach these nodes to have a label, so that the Prometheus metrics
exporter gives these metric a uniform name with the name of the clock
attached as a label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
Under kern.cam we have certain sysctls that are per-device, such as the
ones under kern.cam.ada.[0-9]+.*. Add a "device_index" label annotation
to such sysctls, so that the Prometheus metrics exporter will give all
of those metrics the same name. The device number will be added to the
metric name as the "device_index" label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
I'm currently working on writing a metrics exporter for the Prometheus
monitoring system to provide access to sysctl metrics. Prometheus and
sysctl have some structural differences:
- sysctl is a tree of string component names.
- Prometheus uses a flat namespace for its metrics, but allows you to
attach labels with values to them, so that you can do aggregation.
An initial version of my exporter simply translated
hw.acpi.thermal.tz1.temperature
to
sysctl_hw_acpi_thermal_tz1_temperature_celcius
while we should ideally have
sysctl_hw_acpi_thermal_temperature_celcius{thermal_zone="tz1"}
allowing you to graph all thermal zones on a system in one go.
The change presented in this commit adds support for accomplishing this,
by providing the ability to attach labels to nodes. In the example I
gave above, the label "thermal_zone" would be attached to "tz1". As this
is a feature that will only be used very rarely, I decided to not change
the KPI too aggressively.
Discussed on: hackers@
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
hammer_time(). This makes assembler exception handlers not fault
itself when setting PCB flags, and allow normal kernel trap handler to
get control. The pointer is reset after FPU parameters are obtained.
Set thread0.td_critnest to 1 for duration of hammer_time() as well.
In particular, page faults at that early stage panic immediately
instead of trying to call not yet operational VM to resolve it.
As result, faults during second half of the hammer_time() execution
have a chance to be reported instead of silent machine reboot or hang.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Speeds up the boot process by disabling sendmail.
- Allows an user to ssh as root with a public key.
- Make ssh(1) respond faster by disabling DNS lookups.
- Enable DHCP on the vtnet(4) interface.
Note: The CLOUDWARE list has not yet been changed to include the
OpenStack target by default yet.
Submitted by: Diego Casati
PR: 215258
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
On all of our platforms, db_expr_t is a signed integer while
db_addr_t is an unsigned integer value. db_search_symbol used variables
of type db_expr_t to hold the current offset of the requested address from
the "best" symbol found so far. This value was initialized to '~0'.
When a new symbol is found from a symbol table, the associated diff for the
new symbol is compared against the existing value as 'if (newdiff < diff)'
to determine if the new symbol had a smaller diff and was thus a closer
match.
On 64-bit MIPS, the '~0' was treated as a negative value (-1). A lookup
that found a perfect match of an address against a symbol returned a diff
of 0. However, in signed comparisons, 0 is not less than -1. As a result,
DDB on 64-bit MIPS never resolved any addresses to symbols. Workaround
this by using casts to force an unsigned comparison.
Probably the diff returned from db_search_symbol() and X_db_search_symbol()
should be changed to a db_addr_t instead of a db_expr_t as it is an
unsigned value (and is an offset of an address, so should fit in the same
size as an address).
Sponsored by: DARPA / AFRL
When the kernel debugger is entered, makectx() is called to store
appropriate state from the trapframe for the debugger into a global
kdb_pcb used as the thread context of the thread entering the
debugger. Stack unwinders for DDB called via db_trace_thread() are
supposed to then use this saved context so that the stack trace for
the current thread starts at the location of the event that triggered
debugger entry.
MIPS was instead starting the stack trace of the current thread from
the context of db_trace_thread itself and unwinding back out through
the debugger to the original frame. Fix a couple of things to bring
MIPS inline with other platforms:
- Fix makectx() to store the PC, SP, and RA in the right portion of
the PCB used by db_trace_thread().
- Fix db_trace_thread() to always use kdb_thr_ctx() (and thus kdb_pcb
for the debugger thread).
- Move the logic for tracing curthread from within the current
function into db_trace_self() to match other architectures.
Sponsored by: DARPA / AFRL
Linux list_for_each_entry() does not neccessarily end with the iterator
NULL (it may be an offset from NULL if the list member is not the first
element of the member struct).
Reported by: Coverity
CID: 1366940
Reviewed by: hselasky@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8780
This fixes backtraces from DDB in n32 kernels as uintptr_t is only a
uint32_t. In particular, the upper 32-bits of each register value were
treated as the register's value breaking both the output of register
values, but also the values of 'ra' and 'sp' required to walk up to the
previous frame.
Sponsored by: DARPA / AFRL
This avoids a race with readers such as dladdr(3)/dlinfo(3)/dlsym(3) and
the atexit(3) handler. This race was introduced in r294373.
Reviewed by: markj, kib, kan
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This commit corrects print of nomatch (newline was too early) and fix
unit number for new child in ar5315_spi (was 0, now is -1 to calculate it
according to actual system state)
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: ray, loos, mizhka
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8749
My plan is to change this function's prototype at some point in the
future to add a new label argument, which can be used to export all of
sysctl as metrics that can be scraped by Prometheus. Switch over this
caller to use the macro wrapper counterpart.
non-zero sector size. Such a device would be a virtual disk of zero
bytes; clearly not useful, and not something we should try to attach.
As a fortuitous side effect, checking that these values are non-zero
here results in them not *becoming* zero later on the function. This
odd behaviour began with r309124 (clang 3.9.0) but is challenging to
debug; making any changes to this function whatsoever seems to affect
the llvm optimizer behaviour enough to make the unexpected zeroing of
the sector_size variable cease.
PR: 215209
Security: The potential for variables to unexpectedly become zero
has worrying consequences for security in general, but
not so much in this particular context.
Up until r295436 GPT timer in i.MX6 Dual dts used the same compatiblity
string as i.MX6 Quad. After the sync up with Linux in r295436, GPT timer
stopped getting attached on the i.MX6 Dual
MFC after: 3 days
