Uftdi(4) examines (c_iflag & (IXON|IXOFF)) to control hw XON-XOFF support.
This is obviously no good, if changes to those bits are not communicated
down the stack.
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
In revision 223722 we introduced support for driver ioctls on init/lock
state devices. Unfortunately the call to ttydevsw_cioctl() clobbers the
value of the error variable, meaning that in many cases ioctl() will now
return ENOTTY, even though the ioctl() was processed properly.
Reported by: Boris Samorodov <bsam ipt ru>
Patch by: jilles@
Approved by: re@ (kib@)
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
kernel for FreeBSD 9.0:
Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *. With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.
Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.
In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.
Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.
Approved by: re (bz)
Submitted by: jonathan
Sponsored by: Google Inc
The cioctl() hook can be used by drivers to add ioctls to the *.init and
*.lock devices. This commit breaks the ttydevsw ABI, since this
structure didn't provide any padding. To prevent ABI breakage in the
future, add a tsw_spare.
Submitted by: Peter Jeremy <peter jeremy alcatel lucent com>
Obtained from: kern/152254 (slightly modified)
Instead of adding custom checks to wait for DCD on open(), just modify
the termios structure to set CLOCAL. This means SIGHUP is no longer
generated when losing DCD as well.
Reviewed by: kib@
MFC after: 1 week
This makes /dev/console more fail-safe and prevents a potential console
lock-up during boot.
Discussed on: stable@
Tested by: koitsu@
MFC after: 1 week
cdev will never be destroyed. Propagate the flag to devfs vnodes as
VV_ETERNVALDEV. Use the flags to avoid acquiring devmtx and taking a
thread reference on such nodes.
In collaboration with: pho
MFC after: 1 month
There are special cases where tty_rel_free() can be called twice in a
row, namely when closing and revoking the TTY at the same moment. Only
call destroy_dev_sched_cb() once.
Reported by: Jeremie Le Hen
MFC after: 1 week
It looks like I didn't implement this when I imported MPSAFE TTY.
Applications like mail(1) still use this. I think it's conceptually bad.
Tested by: Pete French <petefrench ticketswitch com>
MFC after: 2 weeks
This replaces d_mmap() with the d_mmap2() implementation and also
changes the type of offset to vm_ooffset_t.
Purge d_mmap2().
All driver modules will need to be rebuilt since D_VERSION is also
bumped.
Reviewed by: jhb@
MFC after: Not in this lifetime...
When the termios CREAD flag is not set, it makes little sense to
allocate an input buffer. Just set the size to 0 in this case to reduce
memory footprint.
Disallow CREAD to be disabled for pseudo-devices to prevent
foot-shooting.
to fail due to lack of resources to queue siginfo. Add KSI_SIGQ flag
that allows sigqueue_add() to fail while trying to allocate memory for
new siginfo. When the flag is not set, behaviour is the same as for
KSI_TRAP: if memory cannot be allocated, set bit in sq_kill. KSI_TRAP is
kept to preserve KBI.
Add SI_KERNEL si_code, to be used in siginfo.si_code when signal is
generated by kernel. Deliver siginfo when signal is generated by kill(2)
family of syscalls (SI_USER with properly filled si_uid and si_pid), or
by kernel (SI_KERNEL, mostly job control or SIGIO). Since KSI_SIGQ flag
is not set for the ksi, low memory condition cause old behaviour.
Keep psignal(9) KBI intact, but modify it to generate SI_KERNEL
si_code. Pgsignal(9) and gsignal(9) now take ksi explicitely. Add
pksignal(9) that behaves like psignal but takes ksi, and ddb kill
command implemented as pksignal(..., ksi = NULL) to not do allocation
while in debugger.
While there, remove some register specifiers and use ANSI C prototypes.
Reviewed by: davidxu
MFC after: 1 month
Now that buffers are deallocated lazily, we should not use
tty*q_getsize() to obtain the buffer size to calculate the low
watermarks. Doing this may cause the watermark to be placed outside the
typical buffer size.
This caused some regressions after my previous commit to the TTY code,
which allows pseudo-devices to resize the buffers as well.
Reported by: yongari, dougb
MFC after: 1 week
Devices that don't implement param() (which means they don't support
hardware parameters such as flow control, baud rate) hardcode the baud
rate to TTYDEF_SPEED. This means the buffer size cannot be configured,
which is a little inconvenient when using canonical mode with big lines
of input, etc.
Make it adjustable, but do clamp it between B50 and B115200 to prevent
awkward buffer sizes. Remove the baud rate assignment from
/etc/gettytab. Trust the kernel to fill in a proper value.
Reported by: Mikolaj Golub <to my trociny gmail com>
MFC after: 1 month
It turned out I did add the code to use the init state devices to set
the termios structure when opening the device, but it seems I totally
forgot to add the bits required to force the actual locking of flags
through the lock state devices.
Reported by: ru
MFC after: 1 week (to be discussed)
As pointed out, POLLHUP should be generated, even if it hasn't been
specified on input. It is also not allowed to return both POLLOUT and
POLLHUP at the same time.
Reported by: jilles
Approved by: re (kib)
The advantage of using a separate condvar is that we can just use
cv_signal(9) instead of cv_broadcast(9). It makes no sense to wake up
multiple threads. It also makes the TTY code easier to understand.
t_dcdwait sounds totally unrelated.
I suspect the usage of bgwait causes a lot of spurious wakeups when
threads are blocked in the background, because they will be woken up
each time a write() call is performed.
Also wakeup dcdwait when the TTY is abandoned.
Now that we start to use credentials on character devices more often
(because of MPSAFE TTY), move the prison-checks that are in place in the
TTY code into devfs.
Instead of strictly comparing the prisons, use the more common
prison_check() function to compare credentials. This means that
pseudo-terminals are only visible in devfs by processes within the same
jail and parent jails.
Even though regular users in parent jails can now interact with
pseudo-terminals from child jails, this seems to be the right approach.
These processes are also capable of interacting with the jailed
processes anyway, through signals for example.
Reviewed by: kib, rwatson (older version)
The code that was in place in exit1() was mainly based on code from the
old TTY layer. The main reason behind this, was because at one moment I
ran a system that had two TTY layers in place at the same time. It is
now sufficient to do the following:
- Remove references from the session structure to the TTY vnode and the
session leader.
- If we have a controlling TTY and the session used by the TTY is equal
to our session, send the SIGHUP.
- If we have a vnode to the controlling TTY which has not been revoked,
revoke it.
While there, change sys/kern/tty.c to use s_ttyp in the comparison
instead of s_ttyvp. It should not make any difference, because s_ttyvp
can only become null when the session leader already left, but it's
nicer to compare against the proper value.
Right now the only way to make tcsetsid(3)/TIOCSCTTY work, is by
ensuring the session leader is dead. This means that an application that
catches SIGHUPs and performs a sleep prevents us from assigning a new
session leader.
Change the code to make it work on revoked TTYs as well. This allows us
to change init(8) to make the shutdown script run in a more clean
environment.
Because our rc scripts also open the /etc/ttyv* nodes, it revokes the
console, preventing startup messages from being displayed.
I really have to think about this. Maybe we should just give the console
its own TTY and let it build on top of other TTYs. I'm still not sure
what to do with input handling there.
Even though I thought I fixed the staircase issue (and I was no longer
able to reproduce it), I got some reports of the issue still being
there. It turns out the staircase effect still occurred when
/dev/console was kept open while killing the getty on the same TTY
(ttyv0).
For some reason I can't figure out how the old TTY code dealt with that,
so I assume the issue has always been there. I only exposed it more by
merging consolectl with ttyv0, which means that the issue was present,
even on systems without a serial console.
I'm now marking the console device as being closed when closing the
regular TTY device node. This means that when the getty shuts down,
init(8) will open /dev/console, which means the termios attributes will
always be reset in this case.
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
I don't want people to override the mutex when allocating a TTY. It has
to be there, to keep drivers like syscons happy. So I'm creating a
tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex()
should eventually be removed.
The advantage of this approach, is that we can just remove a function,
without breaking the regular API in the future.
In the original MPSAFE TTY code, I changed the behaviour by returning
EBUSY. I thought this made more sense, because it's basically a race to
see who gets the TTY first.
It turns out this is not a good change, because it also causes EBUSY to
be returned when another process is closing the TTY. This can happen
during startup, when /etc/rc (or one of its children) is still busy
draining its data and /sbin/init is attempting to open the TTY to spawn
a getty.
Reported by: bz
Tested by: bz
fget_unlocked().
- Save old file descriptor tables created on expansion until
the entire descriptor table is freed so that pointers may be
followed without regard for expanders.
- Mark the file zone as NOFREE so we may attempt to reference
potentially freed files.
- Convert several fget_locked() users to fget_unlocked(). This
requires us to manage reference counts explicitly but reduces
locking overhead in the common case.
It turns out my handling of SIGTTOU and SIGTTIN didn't entirely comply
to the standards. It is true that in the SIGTTOU case we should not
return EIO when the signal is ignored/blocked, but in the SIGTTIN case
we must.
See also: POSIX issue 7 section 11.1.4
It's better to just use internal language constructs, because it is
likely the compiler has a better opinion on whether to perform inlining,
which is very likely to happen to struct winsize.
Submitted by: Christoph Mallon <christoph mallon gmx de>
Just like the old TTY layer, the current MPSAFE TTY layer does not make
any attempt to serialize calls of write(). Data is copied into the
kernel in 256 (TTY_STACKBUF) byte chunks. If a write() call occurs at
the same time, the data may interleave. This is especially likely when
the TTY starts blocking, because the output queue reaches the high
watermark.
I've implemented this by adding a new flag, TTY_BUSY_OUT, which is used
to mark a TTY as having a thread stuck in write(). Because I don't want
non-blocking processes to be possibly blocked by a sleeping thread, I'm
still allowing it to bypass the protection. According to this message,
the Linux kernel returns EAGAIN in such cases, but I think that's a
little too restrictive:
http://kerneltrap.org/index.php?q=mailarchive/linux-kernel/2007/5/2/85418/thread
PR: kern/118287
When we leave the console TTY constantly open, we never reset the
termios attributes. This causes output processing, echoing, etc. not to
be reset to the proper values when going into single user mode after the
system has booted. It also causes nl-to-crnl-conversion not to take
place during shutdown, which causes a `staircase effect'.
This patch adds a new TTY flag, TF_OPENED_CONS, which is set when the
TTY is opened through /dev/console. Because the flags are only used by
the kernel and the pstat(8) utility, I've decided to renumber the TTY
flags. This shouldn't be an issue, because the TTY layer is not yet part
of a stable release.
Reported by: Mark Atkinson <atkin901 yahoo com>
Tested by: sepotvin
The TTY buffers used the standard <sys/queue.h> lists. Unfortunately
they have a big shortcoming. If you want to have a double linked list,
but no tail pointer, it's still not possible to obtain the previous
element in the list. Inside the buffers we don't need them. This is why
I switched to custom linked list macros. The macros will also keep track
of the amount of items in the list. Because it doesn't use a sentinel,
we can just initialize the queues with zero.
In its simplest form (the output queue), we will only keep two
references to blocks in the queue, namely the head of the list and the
last block in use. All free blocks are stored behind the last block in
use.
I noticed there was a very subtle bug in the previous code: in a very
uncommon corner case, it would uma_zfree() a block in the queue before
calling memcpy() to extract the data from the block.
During startup some of the syscons TTY's are used to set attributes like
the screensaver and mouse options. These actions cause /dev/console to
be rendered unusable.
Fix the issue by leaving the TTY opened when it is used as the console
device.
Reported by: imp
Right now the wchan strings "ttyinp" and "ttybgw" only differ one
character from the strings we used prior to MPSAFE TTY. Just rename them
back to their pre-MPSAFE TTY counterparts.
Also rename "ttylck" to "ttymtx", which should make it more clear that a
process is blocked on the TTY mutex, not some other form of locking.
