d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1fc9e38706
freebsd-nq/sys/dev/iwi/if_iwi.c
Max Laier c10b140011 MFp4: reworked iwi-driver 
Changelog towards if_iwi.c 1.26 (some changes have been committed separately
in the mean time):

- add led support
- add firmware loading on demand
 - auto-restart firmware when it crashes
 - serialize operations sent to the firmware to reduce firmware crashes
- add power save operation support
 - remove incorrect specification of tx power control capability
- add radio on/off switch support

- improve net80211 state machine operation
 - recognize and handle beacon miss
 - handle authentication and association failures better
 - add shared key authentication
 - fix ibss mode (many changes)
 - fix wme (many changes)
- correct radiotap support (many changes)
- correct bus dma setup of s/g
- correct various locking issues
- fix monitor mode
- fix scanning (many changes)
 - recover from wedged scan requests
 - respect active channel list
- eliminate cases where interface was marked down on error
- don't treat parity errors as fatal
- reclaim mgt frames immediately from tx queue
- correct interrupt handling, ack early (from NetBSD)
- fix short/long preamble handling

Committed with RELENG_6 compat #if's, should compile in RELENG_6.  Requires
net/iwi-firmware-kmod to function.

Much work done by:	sam
Tested by:		many (freebsd-net), ume, luigi
MFC after:		4 weeks
2006-04-27 21:43:37 +00:00

3522 lines
91 KiB
C
Raw Blame History

/*-
* Copyright (c) 2004, 2005
* Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
* Copyright (c) 2005-2006 Sam Leffler, Errno Consulting
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Intel(R) PRO/Wireless 2200BG/2225BG/2915ABG driver
* http://www.intel.com/network/connectivity/products/wireless/prowireless_mobile.htm
*/
#include <sys/param.h>
#include <sys/sysctl.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/proc.h>
#include <sys/mount.h>
#include <sys/namei.h>
#include <sys/linker.h>
#include <sys/firmware.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <machine/clock.h>
#include <sys/rman.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#include <dev/iwi/if_iwireg.h>
#include <dev/iwi/if_iwivar.h>
#define IWI_DEBUG
#ifdef IWI_DEBUG
#define DPRINTF(x) do { if (iwi_debug > 0) printf x; } while (0)
#define DPRINTFN(n, x) do { if (iwi_debug >= (n)) printf x; } while (0)
int iwi_debug = 0;
SYSCTL_INT(_debug, OID_AUTO, iwi, CTLFLAG_RW, &iwi_debug, 0, "iwi debug level");
#else
#define DPRINTF(x)
#define DPRINTFN(n, x)
#endif
MODULE_DEPEND(iwi, pci, 1, 1, 1);
MODULE_DEPEND(iwi, wlan, 1, 1, 1);
MODULE_DEPEND(iwi, firmware, 1, 1, 1);
enum {
IWI_LED_TX,
IWI_LED_RX,
IWI_LED_POLL,
};
struct iwi_ident {
uint16_t vendor;
uint16_t device;
const char *name;
};
static const struct iwi_ident iwi_ident_table[] = {
{ 0x8086, 0x4220, "Intel(R) PRO/Wireless 2200BG" },
{ 0x8086, 0x4221, "Intel(R) PRO/Wireless 2225BG" },
{ 0x8086, 0x4223, "Intel(R) PRO/Wireless 2915ABG" },
{ 0x8086, 0x4224, "Intel(R) PRO/Wireless 2915ABG" },
{ 0, 0, NULL }
};
static void iwi_dma_map_addr(void *, bus_dma_segment_t *, int, int);
static int iwi_alloc_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *,
int);
static void iwi_reset_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *);
static void iwi_free_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *);
static int iwi_alloc_tx_ring(struct iwi_softc *, struct iwi_tx_ring *,
int, bus_addr_t, bus_addr_t);
static void iwi_reset_tx_ring(struct iwi_softc *, struct iwi_tx_ring *);
static void iwi_free_tx_ring(struct iwi_softc *, struct iwi_tx_ring *);
static int iwi_alloc_rx_ring(struct iwi_softc *, struct iwi_rx_ring *,
int);
static void iwi_reset_rx_ring(struct iwi_softc *, struct iwi_rx_ring *);
static void iwi_free_rx_ring(struct iwi_softc *, struct iwi_rx_ring *);
static struct ieee80211_node *iwi_node_alloc(struct ieee80211_node_table *);
static void iwi_node_free(struct ieee80211_node *);
static int iwi_media_change(struct ifnet *);
static void iwi_media_status(struct ifnet *, struct ifmediareq *);
static int iwi_newstate(struct ieee80211com *, enum ieee80211_state, int);
static void iwi_wme_init(struct iwi_softc *);
static void iwi_wme_setparams(void *, int);
static int iwi_wme_update(struct ieee80211com *);
static uint16_t iwi_read_prom_word(struct iwi_softc *, uint8_t);
static void iwi_frame_intr(struct iwi_softc *, struct iwi_rx_data *, int,
struct iwi_frame *);
static void iwi_notification_intr(struct iwi_softc *, struct iwi_notif *);
static void iwi_rx_intr(struct iwi_softc *);
static void iwi_tx_intr(struct iwi_softc *, struct iwi_tx_ring *);
static void iwi_intr(void *);
static int iwi_cmd(struct iwi_softc *, uint8_t, void *, uint8_t);
static void iwi_write_ibssnode(struct iwi_softc *, const u_int8_t [], int);
static int iwi_tx_start(struct ifnet *, struct mbuf *,
struct ieee80211_node *, int);
static void iwi_start(struct ifnet *);
static void iwi_watchdog(struct ifnet *);
static int iwi_ioctl(struct ifnet *, u_long, caddr_t);
static void iwi_stop_master(struct iwi_softc *);
static int iwi_reset(struct iwi_softc *);
static int iwi_load_ucode(struct iwi_softc *, const struct iwi_fw *);
static int iwi_load_firmware(struct iwi_softc *, const struct iwi_fw *);
static int iwi_config(struct iwi_softc *);
static int iwi_get_firmware(struct iwi_softc *);
static void iwi_put_firmware(struct iwi_softc *);
static void iwi_scanabort(void *, int);
static void iwi_scandone(void *, int);
static void iwi_scanstart(void *, int);
static void iwi_scanchan(void *, int);
static int iwi_auth_and_assoc(struct iwi_softc *);
static int iwi_disassociate(struct iwi_softc *, int quiet);
static void iwi_down(void *, int);
static void iwi_init(void *);
static void iwi_init_locked(void *, int);
static void iwi_stop(void *);
static void iwi_restart(void *, int);
static int iwi_getrfkill(struct iwi_softc *);
static void iwi_radio_on(void *, int);
static void iwi_radio_off(void *, int);
static void iwi_sysctlattach(struct iwi_softc *);
static void iwi_led_event(struct iwi_softc *, int);
static void iwi_ledattach(struct iwi_softc *);
static int iwi_probe(device_t);
static int iwi_attach(device_t);
static int iwi_detach(device_t);
static int iwi_shutdown(device_t);
static int iwi_suspend(device_t);
static int iwi_resume(device_t);
static device_method_t iwi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, iwi_probe),
DEVMETHOD(device_attach, iwi_attach),
DEVMETHOD(device_detach, iwi_detach),
DEVMETHOD(device_shutdown, iwi_shutdown),
DEVMETHOD(device_suspend, iwi_suspend),
DEVMETHOD(device_resume, iwi_resume),
{ 0, 0 }
};
static driver_t iwi_driver = {
"iwi",
iwi_methods,
sizeof (struct iwi_softc)
};
static devclass_t iwi_devclass;
DRIVER_MODULE(iwi, pci, iwi_driver, iwi_devclass, 0, 0);
/*
* Supported rates for 802.11a/b/g modes (in 500Kbps unit).
*/
static const struct ieee80211_rateset iwi_rateset_11a =
{ 8, { 12, 18, 24, 36, 48, 72, 96, 108 } };
static const struct ieee80211_rateset iwi_rateset_11b =
{ 4, { 2, 4, 11, 22 } };
static const struct ieee80211_rateset iwi_rateset_11g =
{ 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } };
static __inline uint8_t
MEM_READ_1(struct iwi_softc *sc, uint32_t addr)
{
CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr);
return CSR_READ_1(sc, IWI_CSR_INDIRECT_DATA);
}
static __inline uint32_t
MEM_READ_4(struct iwi_softc *sc, uint32_t addr)
{
CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr);
return CSR_READ_4(sc, IWI_CSR_INDIRECT_DATA);
}
static int
iwi_probe(device_t dev)
{
const struct iwi_ident *ident;
for (ident = iwi_ident_table; ident->name != NULL; ident++) {
if (pci_get_vendor(dev) == ident->vendor &&
pci_get_device(dev) == ident->device) {
device_set_desc(dev, ident->name);
return 0;
}
}
return ENXIO;
}
/* Base Address Register */
#define IWI_PCI_BAR0 0x10
static int
iwi_attach(device_t dev)
{
struct iwi_softc *sc = device_get_softc(dev);
struct ifnet *ifp;
struct ieee80211com *ic = &sc->sc_ic;
uint16_t val;
int error, i;
sc->sc_dev = dev;
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
sc->sc_unr = new_unrhdr(1, IWI_MAX_IBSSNODE-1, &sc->sc_mtx);
#if __FreeBSD_version >= 700000
sc->sc_tq = taskqueue_create("iwi_taskq", M_NOWAIT,
taskqueue_thread_enqueue, &sc->sc_tq);
taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, "%s taskq",
device_get_nameunit(dev));
#else
sc->sc_tq = taskqueue_create("iwi_taskq", M_NOWAIT,
taskqueue_thread_enqueue, &sc->sc_tq, &sc->sc_tqproc);
kthread_create(taskqueue_thread_loop, &sc->sc_tq, &sc->sc_tqproc,
0, 0, "%s taskq", device_get_nameunit(dev));
#endif
TASK_INIT(&sc->sc_radiontask, 0, iwi_radio_on, sc);
TASK_INIT(&sc->sc_radiofftask, 0, iwi_radio_off, sc);
TASK_INIT(&sc->sc_scanstarttask, 0, iwi_scanstart, sc);
TASK_INIT(&sc->sc_scanaborttask, 0, iwi_scanabort, sc);
TASK_INIT(&sc->sc_scandonetask, 0, iwi_scandone, sc);
TASK_INIT(&sc->sc_scantask, 0, iwi_scanchan, sc);
TASK_INIT(&sc->sc_setwmetask, 0, iwi_wme_setparams, sc);
TASK_INIT(&sc->sc_downtask, 0, iwi_down, sc);
TASK_INIT(&sc->sc_restarttask, 0, iwi_restart, sc);
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
device_printf(dev, "chip is in D%d power mode "
"-- setting to D0\n", pci_get_powerstate(dev));
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
}
pci_write_config(dev, 0x41, 0, 1);
/* enable bus-mastering */
pci_enable_busmaster(dev);
sc->mem_rid = IWI_PCI_BAR0;
sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->mem_rid,
RF_ACTIVE);
if (sc->mem == NULL) {
device_printf(dev, "could not allocate memory resource\n");
goto fail;
}
sc->sc_st = rman_get_bustag(sc->mem);
sc->sc_sh = rman_get_bushandle(sc->mem);
sc->irq_rid = 0;
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
RF_ACTIVE | RF_SHAREABLE);
if (sc->irq == NULL) {
device_printf(dev, "could not allocate interrupt resource\n");
goto fail;
}
if (iwi_reset(sc) != 0) {
device_printf(dev, "could not reset adapter\n");
goto fail;
}
/*
* Allocate rings.
*/
if (iwi_alloc_cmd_ring(sc, &sc->cmdq, IWI_CMD_RING_COUNT) != 0) {
device_printf(dev, "could not allocate Cmd ring\n");
goto fail;
}
error = iwi_alloc_tx_ring(sc, &sc->txq[0], IWI_TX_RING_COUNT,
IWI_CSR_TX1_RIDX, IWI_CSR_TX1_WIDX);
if (error != 0) {
device_printf(dev, "could not allocate Tx ring 1\n");
goto fail;
}
error = iwi_alloc_tx_ring(sc, &sc->txq[1], IWI_TX_RING_COUNT,
IWI_CSR_TX2_RIDX, IWI_CSR_TX2_WIDX);
if (error != 0) {
device_printf(dev, "could not allocate Tx ring 2\n");
goto fail;
}
error = iwi_alloc_tx_ring(sc, &sc->txq[2], IWI_TX_RING_COUNT,
IWI_CSR_TX3_RIDX, IWI_CSR_TX3_WIDX);
if (error != 0) {
device_printf(dev, "could not allocate Tx ring 3\n");
goto fail;
}
error = iwi_alloc_tx_ring(sc, &sc->txq[3], IWI_TX_RING_COUNT,
IWI_CSR_TX4_RIDX, IWI_CSR_TX4_WIDX);
if (error != 0) {
device_printf(dev, "could not allocate Tx ring 4\n");
goto fail;
}
if (iwi_alloc_rx_ring(sc, &sc->rxq, IWI_RX_RING_COUNT) != 0) {
device_printf(dev, "could not allocate Rx ring\n");
goto fail;
}
iwi_wme_init(sc);
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
goto fail;
}
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = iwi_init;
ifp->if_ioctl = iwi_ioctl;
ifp->if_start = iwi_start;
ifp->if_watchdog = iwi_watchdog;
IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
IFQ_SET_READY(&ifp->if_snd);
ic->ic_ifp = ifp;
ic->ic_wme.wme_update = iwi_wme_update;
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
ic->ic_state = IEEE80211_S_INIT;
/* set device capabilities */
ic->ic_caps =
IEEE80211_C_IBSS | /* IBSS mode supported */
IEEE80211_C_MONITOR | /* monitor mode supported */
IEEE80211_C_PMGT | /* power save supported */
IEEE80211_C_SHPREAMBLE | /* short preamble supported */
IEEE80211_C_WPA | /* 802.11i */
IEEE80211_C_WME; /* 802.11e */
/* read MAC address from EEPROM */
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 0);
ic->ic_myaddr[0] = val & 0xff;
ic->ic_myaddr[1] = val >> 8;
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 1);
ic->ic_myaddr[2] = val & 0xff;
ic->ic_myaddr[3] = val >> 8;
val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 2);
ic->ic_myaddr[4] = val & 0xff;
ic->ic_myaddr[5] = val >> 8;
if (pci_get_device(dev) >= 0x4223) {
/* set supported .11a rates (2915ABG only) */
ic->ic_sup_rates[IEEE80211_MODE_11A] = iwi_rateset_11a;
/* set supported .11a channels */
for (i = 36; i <= 64; i += 4) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ);
ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A;
}
for (i = 149; i <= 165; i += 4) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ);
ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A;
}
}
/* set supported .11b and .11g rates */
ic->ic_sup_rates[IEEE80211_MODE_11B] = iwi_rateset_11b;
ic->ic_sup_rates[IEEE80211_MODE_11G] = iwi_rateset_11g;
/* set supported .11b and .11g channels (1 through 14) */
for (i = 1; i <= 14; i++) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
ic->ic_channels[i].ic_flags =
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
}
ieee80211_ifattach(ic);
/* override default methods */
ic->ic_node_alloc = iwi_node_alloc;
sc->sc_node_free = ic->ic_node_free;
ic->ic_node_free = iwi_node_free;
/* override state transition machine */
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = iwi_newstate;
ieee80211_media_init(ic, iwi_media_change, iwi_media_status);
bpfattach2(ifp, DLT_IEEE802_11_RADIO,
sizeof (struct ieee80211_frame) + sizeof (sc->sc_txtap),
&sc->sc_drvbpf);
sc->sc_rxtap_len = sizeof sc->sc_rxtap;
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(IWI_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = sizeof sc->sc_txtap;
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(IWI_TX_RADIOTAP_PRESENT);
iwi_sysctlattach(sc);
iwi_ledattach(sc);
/*
* Hook our interrupt after all initialization is complete.
*/
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE,
iwi_intr, sc, &sc->sc_ih);
if (error != 0) {
device_printf(dev, "could not set up interrupt\n");
goto fail;
}
if (bootverbose)
ieee80211_announce(ic);
return 0;
fail: iwi_detach(dev);
return ENXIO;
}
static int
iwi_detach(device_t dev)
{
struct iwi_softc *sc = device_get_softc(dev);
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
iwi_stop(sc);
iwi_put_firmware(sc);
if (ifp != NULL) {
bpfdetach(ifp);
ieee80211_ifdetach(ic);
}
iwi_free_cmd_ring(sc, &sc->cmdq);
iwi_free_tx_ring(sc, &sc->txq[0]);
iwi_free_tx_ring(sc, &sc->txq[1]);
iwi_free_tx_ring(sc, &sc->txq[2]);
iwi_free_tx_ring(sc, &sc->txq[3]);
iwi_free_rx_ring(sc, &sc->rxq);
if (sc->irq != NULL) {
bus_teardown_intr(dev, sc->irq, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq);
}
if (sc->mem != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem);
if (ifp != NULL)
if_free(ifp);
taskqueue_free(sc->sc_tq);
if (sc->sc_unr != NULL)
delete_unrhdr(sc->sc_unr);
mtx_destroy(&sc->sc_mtx);
return 0;
}
static void
iwi_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
if (error != 0)
return;
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static int
iwi_alloc_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring, int count)
{
int error;
ring->count = count;
ring->queued = 0;
ring->cur = ring->next = 0;
error = bus_dma_tag_create(NULL, 4, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL, count * IWI_CMD_DESC_SIZE, 1,
count * IWI_CMD_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
goto fail;
}
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
count * IWI_CMD_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not load desc DMA map\n");
goto fail;
}
return 0;
fail: iwi_free_cmd_ring(sc, ring);
return error;
}
static void
iwi_reset_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring)
{
ring->queued = 0;
ring->cur = ring->next = 0;
}
static void
iwi_free_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring)
{
if (ring->desc != NULL) {
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
}
if (ring->desc_dmat != NULL)
bus_dma_tag_destroy(ring->desc_dmat);
}
static int
iwi_alloc_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring, int count,
bus_addr_t csr_ridx, bus_addr_t csr_widx)
{
int i, error;
ring->count = count;
ring->queued = 0;
ring->cur = ring->next = 0;
ring->csr_ridx = csr_ridx;
ring->csr_widx = csr_widx;
error = bus_dma_tag_create(NULL, 4, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL, count * IWI_TX_DESC_SIZE, 1,
count * IWI_TX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
goto fail;
}
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
count * IWI_TX_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not load desc DMA map\n");
goto fail;
}
ring->data = malloc(count * sizeof (struct iwi_tx_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ring->data == NULL) {
device_printf(sc->sc_dev, "could not allocate soft data\n");
error = ENOMEM;
goto fail;
}
error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, IWI_MAX_NSEG,
MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create data DMA tag\n");
goto fail;
}
for (i = 0; i < count; i++) {
error = bus_dmamap_create(ring->data_dmat, 0,
&ring->data[i].map);
if (error != 0) {
device_printf(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
}
return 0;
fail: iwi_free_tx_ring(sc, ring);
return error;
}
static void
iwi_reset_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring)
{
struct iwi_tx_data *data;
int i;
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
if (data->ni != NULL) {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
}
ring->queued = 0;
ring->cur = ring->next = 0;
}
static void
iwi_free_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring)
{
struct iwi_tx_data *data;
int i;
if (ring->desc != NULL) {
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
}
if (ring->desc_dmat != NULL)
bus_dma_tag_destroy(ring->desc_dmat);
if (ring->data != NULL) {
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
}
if (data->ni != NULL)
ieee80211_free_node(data->ni);
if (data->map != NULL)
bus_dmamap_destroy(ring->data_dmat, data->map);
}
free(ring->data, M_DEVBUF);
}
if (ring->data_dmat != NULL)
bus_dma_tag_destroy(ring->data_dmat);
}
static int
iwi_alloc_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring, int count)
{
struct iwi_rx_data *data;
int i, error;
ring->count = count;
ring->cur = 0;
ring->data = malloc(count * sizeof (struct iwi_rx_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ring->data == NULL) {
device_printf(sc->sc_dev, "could not allocate soft data\n");
error = ENOMEM;
goto fail;
}
error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, NULL,
NULL, &ring->data_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create data DMA tag\n");
goto fail;
}
for (i = 0; i < count; i++) {
data = &ring->data[i];
error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
if (error != 0) {
device_printf(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
data->m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (data->m == NULL) {
device_printf(sc->sc_dev,
"could not allocate rx mbuf\n");
error = ENOMEM;
goto fail;
}
error = bus_dmamap_load(ring->data_dmat, data->map,
mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr,
&data->physaddr, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not load rx buf DMA map");
goto fail;
}
data->reg = IWI_CSR_RX_BASE + i * 4;
}
return 0;
fail: iwi_free_rx_ring(sc, ring);
return error;
}
static void
iwi_reset_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring)
{
ring->cur = 0;
}
static void
iwi_free_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring)
{
struct iwi_rx_data *data;
int i;
if (ring->data != NULL) {
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
}
if (data->map != NULL)
bus_dmamap_destroy(ring->data_dmat, data->map);
}
free(ring->data, M_DEVBUF);
}
if (ring->data_dmat != NULL)
bus_dma_tag_destroy(ring->data_dmat);
}
static int
iwi_shutdown(device_t dev)
{
struct iwi_softc *sc = device_get_softc(dev);
iwi_stop(sc);
iwi_put_firmware(sc); /* ??? XXX */
return 0;
}
static int
iwi_suspend(device_t dev)
{
struct iwi_softc *sc = device_get_softc(dev);
iwi_stop(sc);
return 0;
}
static int
iwi_resume(device_t dev)
{
struct iwi_softc *sc = device_get_softc(dev);
struct ifnet *ifp = sc->sc_ic.ic_ifp;
IWI_LOCK_DECL;
IWI_LOCK(sc);
pci_write_config(dev, 0x41, 0, 1);
if (ifp->if_flags & IFF_UP) {
ifp->if_init(ifp->if_softc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
ifp->if_start(ifp);
}
IWI_UNLOCK(sc);
return 0;
}
static struct ieee80211_node *
iwi_node_alloc(struct ieee80211_node_table *nt)
{
struct iwi_node *in;
in = malloc(sizeof (struct iwi_node), M_80211_NODE, M_NOWAIT | M_ZERO);
if (in == NULL)
return NULL;
in->in_station = -1;
return &in->in_node;
}
static void
iwi_node_free(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct iwi_softc *sc = ic->ic_ifp->if_softc;
struct iwi_node *in = (struct iwi_node *)ni;
if (in->in_station != -1) {
DPRINTF(("%s mac %6D station %u\n", __func__,
ni->ni_macaddr, ":", in->in_station));
free_unr(sc->sc_unr, in->in_station);
}
sc->sc_node_free(ni);
}
static int
iwi_media_change(struct ifnet *ifp)
{
struct iwi_softc *sc = ifp->if_softc;
int error;
IWI_LOCK_DECL;
IWI_LOCK(sc);
error = ieee80211_media_change(ifp);
if (error == ENETRESET &&
(ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING))
iwi_init_locked(sc, 0);
IWI_UNLOCK(sc);
return error;
}
/*
* Convert h/w rate code to IEEE rate code.
*/
static int
iwi_cvtrate(int iwirate)
{
switch (iwirate) {
case IWI_RATE_DS1: return 2;
case IWI_RATE_DS2: return 4;
case IWI_RATE_DS5: return 11;
case IWI_RATE_DS11: return 22;
case IWI_RATE_OFDM6: return 12;
case IWI_RATE_OFDM9: return 18;
case IWI_RATE_OFDM12: return 24;
case IWI_RATE_OFDM18: return 36;
case IWI_RATE_OFDM24: return 48;
case IWI_RATE_OFDM36: return 72;
case IWI_RATE_OFDM48: return 96;
case IWI_RATE_OFDM54: return 108;
}
return 0;
}
/*
* The firmware automatically adapts the transmit speed. We report its current
* value here.
*/
static void
iwi_media_status(struct ifnet *ifp, struct ifmediareq *imr)
{
struct iwi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
int rate;
imr->ifm_status = IFM_AVALID;
imr->ifm_active = IFM_IEEE80211;
if (ic->ic_state == IEEE80211_S_RUN)
imr->ifm_status |= IFM_ACTIVE;
/* read current transmission rate from adapter */
rate = iwi_cvtrate(CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE));
imr->ifm_active |= ieee80211_rate2media(ic, rate, ic->ic_curmode);
if (ic->ic_opmode == IEEE80211_M_IBSS)
imr->ifm_active |= IFM_IEEE80211_ADHOC;
else if (ic->ic_opmode == IEEE80211_M_MONITOR)
imr->ifm_active |= IFM_IEEE80211_MONITOR;
}
static int
iwi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct ifnet *ifp = ic->ic_ifp;
struct iwi_softc *sc = ifp->if_softc;
DPRINTF(("%s: %s -> %s flags 0x%x\n", __func__,
ieee80211_state_name[ic->ic_state],
ieee80211_state_name[nstate], sc->flags));
/* XXX state change race with taskqueue */
switch (nstate) {
case IEEE80211_S_SCAN:
if (ic->ic_state == IEEE80211_S_RUN) {
/*
* Beacon miss, send disassoc and wait for a reply
* from the card; we'll start a scan then. Note
* this only happens with auto roaming; otherwise
* just notify users and wait to be directed.
*/
/* notify directly as we bypass net80211 */
ieee80211_sta_leave(ic, ic->ic_bss);
if (ic->ic_roaming == IEEE80211_ROAMING_AUTO)
taskqueue_enqueue(sc->sc_tq, &sc->sc_downtask);
break;
}
if ((sc->flags & IWI_FLAG_SCANNING) == 0) {
sc->flags |= IWI_FLAG_SCANNING;
taskqueue_enqueue(sc->sc_tq, &sc->sc_scanstarttask);
}
break;
case IEEE80211_S_AUTH:
iwi_auth_and_assoc(sc);
break;
case IEEE80211_S_RUN:
if (ic->ic_opmode == IEEE80211_M_IBSS) {
/*
* XXX when joining an ibss network we are called
* with a SCAN -> RUN transition on scan complete.
* Use that to call iwi_auth_and_assoc. On completing
* the join we are then called again with an
* AUTH -> RUN transition and we want to do nothing.
* This is all totally bogus and needs to be redone.
*/
if (ic->ic_state == IEEE80211_S_SCAN)
iwi_auth_and_assoc(sc);
} else if (ic->ic_opmode == IEEE80211_M_MONITOR)
taskqueue_enqueue(sc->sc_tq, &sc->sc_scantask);
/* XXX way wrong */
return sc->sc_newstate(ic, nstate,
IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
case IEEE80211_S_ASSOC:
break;
case IEEE80211_S_INIT:
/*
* NB: don't try to do this if iwi_stop_master has
* shutdown the firmware and disabled interrupts.
*/
if (ic->ic_state == IEEE80211_S_RUN &&
(sc->flags & IWI_FLAG_FW_INITED))
taskqueue_enqueue(sc->sc_tq, &sc->sc_downtask);
break;
}
ic->ic_state = nstate;
return 0;
}
/*
* WME parameters coming from IEEE 802.11e specification. These values are
* already declared in ieee80211_proto.c, but they are static so they can't
* be reused here.
*/
static const struct wmeParams iwi_wme_cck_params[WME_NUM_AC] = {
{ 0, 3, 5, 7, 0 }, /* WME_AC_BE */
{ 0, 3, 5, 10, 0 }, /* WME_AC_BK */
{ 0, 2, 4, 5, 188 }, /* WME_AC_VI */
{ 0, 2, 3, 4, 102 } /* WME_AC_VO */
};
static const struct wmeParams iwi_wme_ofdm_params[WME_NUM_AC] = {
{ 0, 3, 4, 6, 0 }, /* WME_AC_BE */
{ 0, 3, 4, 10, 0 }, /* WME_AC_BK */
{ 0, 2, 3, 4, 94 }, /* WME_AC_VI */
{ 0, 2, 2, 3, 47 } /* WME_AC_VO */
};
#define IWI_EXP2(v) htole16((1 << (v)) - 1)
#define IWI_USEC(v) htole16(IEEE80211_TXOP_TO_US(v))
static void
iwi_wme_init(struct iwi_softc *sc)
{
const struct wmeParams *wmep;
int ac;
memset(sc->wme, 0, sizeof sc->wme);
for (ac = 0; ac < WME_NUM_AC; ac++) {
/* set WME values for CCK modulation */
wmep = &iwi_wme_cck_params[ac];
sc->wme[1].aifsn[ac] = wmep->wmep_aifsn;
sc->wme[1].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
sc->wme[1].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
sc->wme[1].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
sc->wme[1].acm[ac] = wmep->wmep_acm;
/* set WME values for OFDM modulation */
wmep = &iwi_wme_ofdm_params[ac];
sc->wme[2].aifsn[ac] = wmep->wmep_aifsn;
sc->wme[2].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
sc->wme[2].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
sc->wme[2].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
sc->wme[2].acm[ac] = wmep->wmep_acm;
}
}
static int
iwi_wme_setparams_locked(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
const struct wmeParams *wmep;
int ac;
for (ac = 0; ac < WME_NUM_AC; ac++) {
/* set WME values for current operating mode */
wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
sc->wme[0].aifsn[ac] = wmep->wmep_aifsn;
sc->wme[0].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin);
sc->wme[0].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax);
sc->wme[0].burst[ac] = IWI_USEC(wmep->wmep_txopLimit);
sc->wme[0].acm[ac] = wmep->wmep_acm;
}
DPRINTF(("Setting WME parameters\n"));
return iwi_cmd(sc, IWI_CMD_SET_WME_PARAMS, sc->wme, sizeof sc->wme);
}
static void
iwi_wme_setparams(void *arg, int npending)
{
struct iwi_softc *sc = arg;
IWI_LOCK_DECL;
IWI_LOCK(sc);
(void) iwi_wme_setparams_locked(sc);
IWI_UNLOCK(sc);
}
#undef IWI_USEC
#undef IWI_EXP2
static int
iwi_wme_update(struct ieee80211com *ic)
{
struct iwi_softc *sc = ic->ic_ifp->if_softc;
/*
* We may be called to update the WME parameters in
* the adapter at various places. If we're already
* associated then initiate the request immediately
* (via the taskqueue); otherwise we assume the params
* will get sent down to the adapter as part of the
* work iwi_auth_and_assoc does.
*/
if (ic->ic_state == IEEE80211_S_RUN)
taskqueue_enqueue(sc->sc_tq, &sc->sc_setwmetask);
return 0;
}
static int
iwi_wme_setie(struct iwi_softc *sc)
{
struct ieee80211_wme_info wme;
memset(&wme, 0, sizeof wme);
wme.wme_id = IEEE80211_ELEMID_VENDOR;
wme.wme_len = sizeof (struct ieee80211_wme_info) - 2;
wme.wme_oui[0] = 0x00;
wme.wme_oui[1] = 0x50;
wme.wme_oui[2] = 0xf2;
wme.wme_type = WME_OUI_TYPE;
wme.wme_subtype = WME_INFO_OUI_SUBTYPE;
wme.wme_version = WME_VERSION;
wme.wme_info = 0;
DPRINTF(("Setting WME IE (len=%u)\n", wme.wme_len));
return iwi_cmd(sc, IWI_CMD_SET_WMEIE, &wme, sizeof wme);
}
/*
* Read 16 bits at address 'addr' from the serial EEPROM.
*/
static uint16_t
iwi_read_prom_word(struct iwi_softc *sc, uint8_t addr)
{
uint32_t tmp;
uint16_t val;
int n;
/* clock C once before the first command */
IWI_EEPROM_CTL(sc, 0);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
/* write start bit (1) */
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C);
/* write READ opcode (10) */
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
/* write address A7-A0 */
for (n = 7; n >= 0; n--) {
IWI_EEPROM_CTL(sc, IWI_EEPROM_S |
(((addr >> n) & 1) << IWI_EEPROM_SHIFT_D));
IWI_EEPROM_CTL(sc, IWI_EEPROM_S |
(((addr >> n) & 1) << IWI_EEPROM_SHIFT_D) | IWI_EEPROM_C);
}
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
/* read data Q15-Q0 */
val = 0;
for (n = 15; n >= 0; n--) {
IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C);
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
tmp = MEM_READ_4(sc, IWI_MEM_EEPROM_CTL);
val |= ((tmp & IWI_EEPROM_Q) >> IWI_EEPROM_SHIFT_Q) << n;
}
IWI_EEPROM_CTL(sc, 0);
/* clear Chip Select and clock C */
IWI_EEPROM_CTL(sc, IWI_EEPROM_S);
IWI_EEPROM_CTL(sc, 0);
IWI_EEPROM_CTL(sc, IWI_EEPROM_C);
return val;
}
static void
iwi_setcurchan(struct iwi_softc *sc, int chan)
{
struct ieee80211com *ic = &sc->sc_ic;
ic->ic_curchan = &ic->ic_channels[chan];
sc->curchan = chan;
sc->sc_rxtap.wr_chan_freq = sc->sc_txtap.wt_chan_freq =
htole16(ic->ic_curchan->ic_freq);
sc->sc_rxtap.wr_chan_flags = sc->sc_txtap.wt_chan_flags =
htole16(ic->ic_curchan->ic_flags);
}
static void
iwi_frame_intr(struct iwi_softc *sc, struct iwi_rx_data *data, int i,
struct iwi_frame *frame)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct mbuf *mnew, *m;
struct ieee80211_node *ni;
int type, error, framelen;
framelen = le16toh(frame->len);
if (framelen < IEEE80211_MIN_LEN || framelen > MCLBYTES) {
/*
* XXX >MCLBYTES is bogus as it means the h/w dma'd
* out of bounds; need to figure out how to limit
* frame size in the firmware
*/
/* XXX stat */
DPRINTFN(1,
("drop rx frame len=%u chan=%u rssi=%u rssi_dbm=%u\n",
le16toh(frame->len), frame->chan, frame->rssi,
frame->rssi_dbm));
return;
}
DPRINTFN(5, ("received frame len=%u chan=%u rssi=%u rssi_dbm=%u\n",
le16toh(frame->len), frame->chan, frame->rssi, frame->rssi_dbm));
if (frame->chan != sc->curchan)
iwi_setcurchan(sc, frame->chan);
/*
* Try to allocate a new mbuf for this ring element and load it before
* processing the current mbuf. If the ring element cannot be loaded,
* drop the received packet and reuse the old mbuf. In the unlikely
* case that the old mbuf can't be reloaded either, explicitly panic.
*/
mnew = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (mnew == NULL) {
ifp->if_ierrors++;
return;
}
bus_dmamap_unload(sc->rxq.data_dmat, data->map);
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
mtod(mnew, void *), MCLBYTES, iwi_dma_map_addr, &data->physaddr,
0);
if (error != 0) {
m_freem(mnew);
/* try to reload the old mbuf */
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr,
&data->physaddr, 0);
if (error != 0) {
/* very unlikely that it will fail... */
panic("%s: could not load old rx mbuf",
device_get_name(sc->sc_dev));
}
ifp->if_ierrors++;
return;
}
/*
* New mbuf successfully loaded, update Rx ring and continue
* processing.
*/
m = data->m;
data->m = mnew;
CSR_WRITE_4(sc, data->reg, data->physaddr);
/* finalize mbuf */
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len = sizeof (struct iwi_hdr) +
sizeof (struct iwi_frame) + framelen;
m_adj(m, sizeof (struct iwi_hdr) + sizeof (struct iwi_frame));
if (sc->sc_drvbpf != NULL) {
struct iwi_rx_radiotap_header *tap = &sc->sc_rxtap;
tap->wr_flags = 0;
tap->wr_rate = iwi_cvtrate(frame->rate);
tap->wr_antsignal = frame->signal;
tap->wr_antenna = frame->antenna;
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m);
}
ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *));
/* send the frame to the 802.11 layer */
type = ieee80211_input(ic, m, ni, frame->rssi_dbm, 0);
/* node is no longer needed */
ieee80211_free_node(ni);
if (sc->sc_softled) {
/*
* Blink for any data frame. Otherwise do a
* heartbeat-style blink when idle. The latter
* is mainly for station mode where we depend on
* periodic beacon frames to trigger the poll event.
*/
if (type == IEEE80211_FC0_TYPE_DATA) {
sc->sc_rxrate = frame->rate;
iwi_led_event(sc, IWI_LED_RX);
} else if (ticks - sc->sc_ledevent >= sc->sc_ledidle)
iwi_led_event(sc, IWI_LED_POLL);
}
}
/* unaligned little endian access */
#define LE_READ_2(p) \
((u_int16_t) \
((((const u_int8_t *)(p))[0] ) | \
(((const u_int8_t *)(p))[1] << 8)))
#define LE_READ_4(p) \
((u_int32_t) \
((((const u_int8_t *)(p))[0] ) | \
(((const u_int8_t *)(p))[1] << 8) | \
(((const u_int8_t *)(p))[2] << 16) | \
(((const u_int8_t *)(p))[3] << 24)))
#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do { \
if ((_len) < (_minlen)) { \
return; \
} \
} while (0)
static int __inline
iswmeoui(const u_int8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI);
}
/*
* Check for an association response frame to see if QoS
* has been negotiated. We parse just enough to figure
* out if we're supposed to use QoS. The proper solution
* is to pass the frame up so ieee80211_input can do the
* work but that's made hard by how things currently are
* done in the driver.
*/
static void
iwi_checkforqos(struct iwi_softc *sc, const struct ieee80211_frame *wh, int len)
{
#define SUBTYPE(wh) ((wh)->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK)
const uint8_t *frm, *efrm, *wme;
struct ieee80211_node *ni;
/* NB: +8 for capinfo, status, associd, and first ie */
if (!(sizeof(*wh)+8 < len && len < IEEE80211_MAX_LEN) ||
SUBTYPE(wh) != IEEE80211_FC0_SUBTYPE_ASSOC_RESP)
return;
/*
* asresp frame format
* [2] capability information
* [2] status
* [2] association ID
* [tlv] supported rates
* [tlv] extended supported rates
* [tlv] WME
*/
frm = (const uint8_t *)&wh[1];
efrm = ((const uint8_t *) wh) + len;
frm += 6;
wme = NULL;
while (frm < efrm) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1]);
switch (*frm) {
case IEEE80211_ELEMID_VENDOR:
if (iswmeoui(frm))
wme = frm;
break;
}
frm += frm[1] + 2;
}
ni = sc->sc_ic.ic_bss;
if (wme != NULL)
ni->ni_flags |= IEEE80211_NODE_QOS;
else
ni->ni_flags &= ~IEEE80211_NODE_QOS;
#undef SUBTYPE
}
static void
iwi_notification_intr(struct iwi_softc *sc, struct iwi_notif *notif)
{
struct ieee80211com *ic = &sc->sc_ic;
struct iwi_notif_scan_channel *chan;
struct iwi_notif_scan_complete *scan;
struct iwi_notif_authentication *auth;
struct iwi_notif_association *assoc;
struct iwi_notif_beacon_state *beacon;
switch (notif->type) {
case IWI_NOTIF_TYPE_SCAN_CHANNEL:
chan = (struct iwi_notif_scan_channel *)(notif + 1);
DPRINTFN(3, ("Scan of channel %u complete (%u)\n",
ic->ic_channels[chan->nchan].ic_freq, chan->nchan));
break;
case IWI_NOTIF_TYPE_SCAN_COMPLETE:
scan = (struct iwi_notif_scan_complete *)(notif + 1);
DPRINTFN(2, ("Scan completed (%u, %u)\n", scan->nchan,
scan->status));
sc->sc_scan_timer = 0;
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
/*
* Monitor mode works by doing a passive scan to set
* the channel and enable rx. Because we don't want
* to abort a scan lest the firmware crash we scan
* for a short period of time and automatically restart
* the scan when notified the sweep has completed.
*/
taskqueue_enqueue(sc->sc_tq, &sc->sc_scantask);
} else {
sc->flags &= ~IWI_FLAG_SCANNING;
taskqueue_enqueue(sc->sc_tq, &sc->sc_scandonetask);
}
break;
case IWI_NOTIF_TYPE_AUTHENTICATION:
auth = (struct iwi_notif_authentication *)(notif + 1);
switch (auth->state) {
case IWI_AUTH_SUCCESS:
DPRINTFN(2, ("Authentication succeeeded\n"));
ieee80211_node_authorize(ic->ic_bss);
ieee80211_new_state(ic, IEEE80211_S_ASSOC, -1);
break;
case IWI_AUTH_FAIL:
DPRINTFN(2, ("Authentication failed\n"));
sc->flags &= ~IWI_FLAG_ASSOCIATED;
/* XXX */
break;
case IWI_AUTH_SENT_1:
case IWI_AUTH_RECV_2:
case IWI_AUTH_SEQ1_PASS:
break;
case IWI_AUTH_SEQ1_FAIL:
DPRINTFN(2, ("Initial authentication handshake failed; "
"you probably need shared key\n"));
/* XXX retry shared key when in auto */
break;
default:
device_printf(sc->sc_dev,
"unknown authentication state %u\n", auth->state);
}
break;
case IWI_NOTIF_TYPE_ASSOCIATION:
assoc = (struct iwi_notif_association *)(notif + 1);
switch (assoc->state) {
case IWI_AUTH_SUCCESS:
/* re-association, do nothing */
break;
case IWI_ASSOC_SUCCESS:
DPRINTFN(2, ("Association succeeded\n"));
sc->flags |= IWI_FLAG_ASSOCIATED;
iwi_checkforqos(sc,
(const struct ieee80211_frame *)(assoc+1),
le16toh(notif->len) - sizeof(*assoc));
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
break;
case IWI_ASSOC_FAIL:
DPRINTFN(2, ("Association failed\n"));
sc->flags &= ~IWI_FLAG_ASSOCIATED;
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
break;
default:
device_printf(sc->sc_dev,
"unknown association state %u\n", assoc->state);
}
break;
case IWI_NOTIF_TYPE_BEACON:
/* XXX check struct length */
beacon = (struct iwi_notif_beacon_state *)(notif + 1);
DPRINTFN(5, ("Beacon state (%u, %u)\n",
beacon->state, le32toh(beacon->number)));
if (beacon->state == IWI_BEACON_MISS) {
#if 0
if (sc->flags & IWI_FLAG_SCANNING) {
/* XXX terminate scan, linux driver
says fw can get stuck */
/* XXX should be handled in iwi_newstate */
taskqueue_enqueue(sc->sc_tq,
&sc->sc_scanaborttask);
}
#endif
/*
* The firmware notifies us of every beacon miss
* so we need to track the count against the
* configured threshold before notifying the
* 802.11 layer.
* XXX try to roam, drop assoc only on much higher count
*/
if (le32toh(beacon->number) >= ic->ic_bmissthreshold) {
DPRINTF(("Beacon miss: %u >= %u\n",
le32toh(beacon->number),
ic->ic_bmissthreshold));
ieee80211_beacon_miss(ic);
}
}
break;
case IWI_NOTIF_TYPE_CALIBRATION:
case IWI_NOTIF_TYPE_NOISE:
case IWI_NOTIF_TYPE_LINK_QUALITY:
DPRINTFN(5, ("Notification (%u)\n", notif->type));
break;
default:
DPRINTF(("unknown notification type %u flags 0x%x len %u\n",
notif->type, notif->flags, le16toh(notif->len)));
}
}
static void
iwi_rx_intr(struct iwi_softc *sc)
{
struct iwi_rx_data *data;
struct iwi_hdr *hdr;
uint32_t hw;
hw = CSR_READ_4(sc, IWI_CSR_RX_RIDX);
for (; sc->rxq.cur != hw;) {
data = &sc->rxq.data[sc->rxq.cur];
bus_dmamap_sync(sc->rxq.data_dmat, data->map,
BUS_DMASYNC_POSTREAD);
hdr = mtod(data->m, struct iwi_hdr *);
switch (hdr->type) {
case IWI_HDR_TYPE_FRAME:
iwi_frame_intr(sc, data, sc->rxq.cur,
(struct iwi_frame *)(hdr + 1));
break;
case IWI_HDR_TYPE_NOTIF:
iwi_notification_intr(sc,
(struct iwi_notif *)(hdr + 1));
break;
default:
device_printf(sc->sc_dev, "unknown hdr type %u\n",
hdr->type);
}
DPRINTFN(15, ("rx done idx=%u\n", sc->rxq.cur));
sc->rxq.cur = (sc->rxq.cur + 1) % IWI_RX_RING_COUNT;
}
/* tell the firmware what we have processed */
hw = (hw == 0) ? IWI_RX_RING_COUNT - 1 : hw - 1;
CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, hw);
}
static void
iwi_tx_intr(struct iwi_softc *sc, struct iwi_tx_ring *txq)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct iwi_tx_data *data;
uint32_t hw;
hw = CSR_READ_4(sc, txq->csr_ridx);
for (; txq->next != hw;) {
data = &txq->data[txq->next];
bus_dmamap_sync(txq->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(txq->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
ieee80211_free_node(data->ni);
data->ni = NULL;
DPRINTFN(15, ("tx done idx=%u\n", txq->next));
ifp->if_opackets++;
txq->queued--;
txq->next = (txq->next + 1) % IWI_TX_RING_COUNT;
}
sc->sc_tx_timer = 0;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
if (sc->sc_softled)
iwi_led_event(sc, IWI_LED_TX);
iwi_start(ifp);
}
static void
iwi_intr(void *arg)
{
struct iwi_softc *sc = arg;
uint32_t r;
IWI_LOCK_DECL;
IWI_LOCK(sc);
if ((r = CSR_READ_4(sc, IWI_CSR_INTR)) == 0 || r == 0xffffffff) {
IWI_UNLOCK(sc);
return;
}
/* acknowledge interrupts */
CSR_WRITE_4(sc, IWI_CSR_INTR, r);
if (r & IWI_INTR_FATAL_ERROR) {
device_printf(sc->sc_dev, "firmware error\n");
taskqueue_enqueue(sc->sc_tq, &sc->sc_restarttask);
}
if (r & IWI_INTR_FW_INITED) {
if (!(r & (IWI_INTR_FATAL_ERROR | IWI_INTR_PARITY_ERROR)))
wakeup(sc);
}
if (r & IWI_INTR_RADIO_OFF)
taskqueue_enqueue(sc->sc_tq, &sc->sc_radiofftask);
if (r & IWI_INTR_CMD_DONE) {
sc->flags &= ~IWI_FLAG_BUSY;
wakeup(sc);
}
if (r & IWI_INTR_TX1_DONE)
iwi_tx_intr(sc, &sc->txq[0]);
if (r & IWI_INTR_TX2_DONE)
iwi_tx_intr(sc, &sc->txq[1]);
if (r & IWI_INTR_TX3_DONE)
iwi_tx_intr(sc, &sc->txq[2]);
if (r & IWI_INTR_TX4_DONE)
iwi_tx_intr(sc, &sc->txq[3]);
if (r & IWI_INTR_RX_DONE)
iwi_rx_intr(sc);
if (r & IWI_INTR_PARITY_ERROR) {
/* XXX rate-limit */
device_printf(sc->sc_dev, "parity error\n");
}
IWI_UNLOCK(sc);
}
static int
iwi_cmd(struct iwi_softc *sc, uint8_t type, void *data, uint8_t len)
{
struct iwi_cmd_desc *desc;
if (sc->flags & IWI_FLAG_BUSY) {
device_printf(sc->sc_dev, "%s: cmd %d not sent, busy\n",
__func__, type);
return EAGAIN;
}
sc->flags |= IWI_FLAG_BUSY;
desc = &sc->cmdq.desc[sc->cmdq.cur];
desc->hdr.type = IWI_HDR_TYPE_COMMAND;
desc->hdr.flags = IWI_HDR_FLAG_IRQ;
desc->type = type;
desc->len = len;
memcpy(desc->data, data, len);
bus_dmamap_sync(sc->cmdq.desc_dmat, sc->cmdq.desc_map,
BUS_DMASYNC_PREWRITE);
DPRINTFN(2, ("sending command idx=%u type=%u len=%u\n", sc->cmdq.cur,
type, len));
sc->cmdq.cur = (sc->cmdq.cur + 1) % IWI_CMD_RING_COUNT;
CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur);
return msleep(sc, &sc->sc_mtx, 0, "iwicmd", hz);
}
static void
iwi_write_ibssnode(struct iwi_softc *sc,
const u_int8_t addr[IEEE80211_ADDR_LEN], int entry)
{
struct iwi_ibssnode node;
/* write node information into NIC memory */
memset(&node, 0, sizeof node);
IEEE80211_ADDR_COPY(node.bssid, addr);
DPRINTF(("%s mac %6D station %u\n", __func__, node.bssid, ":", entry));
CSR_WRITE_REGION_1(sc,
IWI_CSR_NODE_BASE + entry * sizeof node,
(uint8_t *)&node, sizeof node);
}
static int
iwi_tx_start(struct ifnet *ifp, struct mbuf *m0, struct ieee80211_node *ni,
int ac)
{
struct iwi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct iwi_node *in = (struct iwi_node *)ni;
const struct ieee80211_frame *wh;
struct ieee80211_key *k;
const struct chanAccParams *cap;
struct iwi_tx_ring *txq = &sc->txq[ac];
struct iwi_tx_data *data;
struct iwi_tx_desc *desc;
struct mbuf *mnew;
bus_dma_segment_t segs[IWI_MAX_NSEG];
int error, nsegs, hdrlen, i;
int ismcast, flags, xflags, staid;
wh = mtod(m0, const struct ieee80211_frame *);
/* NB: only data frames use this path */
hdrlen = ieee80211_hdrsize(wh);
ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1);
flags = xflags = 0;
if (!ismcast)
flags |= IWI_DATA_FLAG_NEED_ACK;
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
flags |= IWI_DATA_FLAG_SHPREAMBLE;
if (IEEE80211_QOS_HAS_SEQ(wh)) {
xflags |= IWI_DATA_XFLAG_QOS;
cap = &ic->ic_wme.wme_chanParams;
if (!cap->cap_wmeParams[ac].wmep_noackPolicy)
flags &= ~IWI_DATA_FLAG_NEED_ACK;
}
/*
* This is only used in IBSS mode where the firmware expect an index
* in a h/w table instead of a destination address.
*/
if (ic->ic_opmode == IEEE80211_M_IBSS) {
if (!ismcast) {
if (in->in_station == -1) {
in->in_station = alloc_unr(sc->sc_unr);
if (in->in_station == -1) {
/* h/w table is full */
m_freem(m0);
ieee80211_free_node(ni);
ifp->if_oerrors++;
return 0;
}
iwi_write_ibssnode(sc,
ni->ni_macaddr, in->in_station);
}
staid = in->in_station;
} else {
/*
* Multicast addresses have no associated node
* so there will be no station entry. We reserve
* entry 0 for one mcast address and use that.
* If there are many being used this will be
* expensive and we'll need to do a better job
* but for now this handles the broadcast case.
*/
if (!IEEE80211_ADDR_EQ(wh->i_addr1, sc->sc_mcast)) {
IEEE80211_ADDR_COPY(sc->sc_mcast, wh->i_addr1);
iwi_write_ibssnode(sc, sc->sc_mcast, 0);
}
staid = 0;
}
} else
staid = 0;
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
k = ieee80211_crypto_encap(ic, ni, m0);
if (k == NULL) {
m_freem(m0);
return ENOBUFS;
}
/* packet header may have moved, reset our local pointer */
wh = mtod(m0, struct ieee80211_frame *);
}
if (sc->sc_drvbpf != NULL) {
struct iwi_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0);
}
data = &txq->data[txq->cur];
desc = &txq->desc[txq->cur];
/* save and trim IEEE802.11 header */
m_copydata(m0, 0, hdrlen, (caddr_t)&desc->wh);
m_adj(m0, hdrlen);
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs,
&nsegs, 0);
if (error != 0 && error != EFBIG) {
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
error);
m_freem(m0);
return error;
}
if (error != 0) {
mnew = m_defrag(m0, M_DONTWAIT);
if (mnew == NULL) {
device_printf(sc->sc_dev,
"could not defragment mbuf\n");
m_freem(m0);
return ENOBUFS;
}
m0 = mnew;
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map,
m0, segs, &nsegs, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not map mbuf (error %d)\n", error);
m_freem(m0);
return error;
}
}
data->m = m0;
data->ni = ni;
desc->hdr.type = IWI_HDR_TYPE_DATA;
desc->hdr.flags = IWI_HDR_FLAG_IRQ;
desc->station = staid;
desc->cmd = IWI_DATA_CMD_TX;
desc->len = htole16(m0->m_pkthdr.len);
desc->flags = flags;
desc->xflags = xflags;
#if 0
if (ic->ic_flags & IEEE80211_F_PRIVACY)
desc->wep_txkey = ic->ic_crypto.cs_def_txkey;
else
#endif
desc->flags |= IWI_DATA_FLAG_NO_WEP;
desc->nseg = htole32(nsegs);
for (i = 0; i < nsegs; i++) {
desc->seg_addr[i] = htole32(segs[i].ds_addr);
desc->seg_len[i] = htole16(segs[i].ds_len);
}
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
DPRINTFN(5, ("sending data frame txq=%u idx=%u len=%u nseg=%u\n",
ac, txq->cur, le16toh(desc->len), nsegs));
txq->queued++;
txq->cur = (txq->cur + 1) % IWI_TX_RING_COUNT;
CSR_WRITE_4(sc, txq->csr_widx, txq->cur);
return 0;
}
static void
iwi_start(struct ifnet *ifp)
{
struct iwi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct mbuf *m0;
struct ether_header *eh;
struct ieee80211_node *ni;
int ac;
IWI_LOCK_DECL;
IWI_LOCK(sc);
if (ic->ic_state != IEEE80211_S_RUN) {
IWI_UNLOCK(sc);
return;
}
for (;;) {
IF_DEQUEUE(&ic->ic_mgtq, m0);
if (m0 == NULL) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL)
break;
if (m0->m_len < sizeof (struct ether_header) &&
(m0 = m_pullup(m0, sizeof (struct ether_header))) == NULL) {
ifp->if_oerrors++;
continue;
}
eh = mtod(m0, struct ether_header *);
ni = ieee80211_find_txnode(ic, eh->ether_dhost);
if (ni == NULL) {
m_freem(m0);
ifp->if_oerrors++;
continue;
}
/* classify mbuf so we can find which tx ring to use */
if (ieee80211_classify(ic, m0, ni) != 0) {
m_freem(m0);
ieee80211_free_node(ni);
ifp->if_oerrors++;
continue;
}
/* XXX does not belong here */
/* no QoS encapsulation for EAPOL frames */
ac = (eh->ether_type != htons(ETHERTYPE_PAE)) ?
M_WME_GETAC(m0) : WME_AC_BE;
if (sc->txq[ac].queued > IWI_TX_RING_COUNT - 8) {
/* there is no place left in this ring */
IFQ_DRV_PREPEND(&ifp->if_snd, m0);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
BPF_MTAP(ifp, m0);
m0 = ieee80211_encap(ic, m0, ni);
if (m0 == NULL) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
continue;
}
} else {
ni = (struct ieee80211_node *) m0->m_pkthdr.rcvif;
m0->m_pkthdr.rcvif = NULL;
/* XXX no way to send mgt frames (yet), discard */
m_freem(m0);
ieee80211_free_node(ni);
continue;
}
if (ic->ic_rawbpf != NULL)
bpf_mtap(ic->ic_rawbpf, m0);
if (iwi_tx_start(ifp, m0, ni, ac) != 0) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
break;
}
sc->sc_tx_timer = 5;
ifp->if_timer = 1;
}
IWI_UNLOCK(sc);
}
static void
iwi_watchdog(struct ifnet *ifp)
{
struct iwi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
IWI_LOCK_DECL;
IWI_LOCK(sc);
if (sc->sc_tx_timer > 0) {
if (--sc->sc_tx_timer == 0) {
if_printf(ifp, "device timeout\n");
ifp->if_oerrors++;
taskqueue_enqueue(sc->sc_tq, &sc->sc_restarttask);
}
}
if (sc->sc_rfkill_timer > 0) {
if (--sc->sc_rfkill_timer == 0) {
/*
* Check for a change in rfkill state. We get an
* interrupt when a radio is disabled but not when
* it is enabled so we must poll for the latter.
*/
if (!iwi_getrfkill(sc))
taskqueue_enqueue(sc->sc_tq, &sc->sc_radiontask);
else
sc->sc_rfkill_timer = 2;
}
}
if (sc->sc_scan_timer > 0) {
if (--sc->sc_scan_timer == 0) {
if (sc->flags & IWI_FLAG_SCANNING) {
if_printf(ifp, "scan stuck\n");
taskqueue_enqueue(sc->sc_tq, &sc->sc_restarttask);
}
}
}
if (sc->sc_tx_timer || sc->sc_rfkill_timer || sc->sc_scan_timer)
ifp->if_timer = 1;
else
ifp->if_timer = 0;
ieee80211_watchdog(ic);
IWI_UNLOCK(sc);
}
static int
iwi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct iwi_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
int error = 0;
IWI_LOCK_DECL;
IWI_LOCK(sc);
switch (cmd) {
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
iwi_init_locked(sc, 0);
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
iwi_stop(sc);
else {
/*
* If device was stopped due to rfkill then
* marked down we'll have the polling thread
* running; stop it explicitly.
*/
sc->sc_rfkill_timer = 0;
}
iwi_put_firmware(sc);
}
break;
default:
error = ieee80211_ioctl(ic, cmd, data);
}
if (error == ENETRESET) {
if ((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) &&
(ic->ic_roaming != IEEE80211_ROAMING_MANUAL))
iwi_init_locked(sc, 0);
error = 0;
}
IWI_UNLOCK(sc);
return error;
}
static void
iwi_stop_master(struct iwi_softc *sc)
{
uint32_t tmp;
int ntries;
/* disable interrupts */
CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, 0);
CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_STOP_MASTER);
for (ntries = 0; ntries < 5; ntries++) {
if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED)
break;
DELAY(10);
}
if (ntries == 5)
device_printf(sc->sc_dev, "timeout waiting for master\n");
tmp = CSR_READ_4(sc, IWI_CSR_RST);
CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_PRINCETON_RESET);
sc->flags &= ~IWI_FLAG_FW_INITED;
}
static int
iwi_reset(struct iwi_softc *sc)
{
uint32_t tmp;
int i, ntries;
iwi_stop_master(sc);
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT);
CSR_WRITE_4(sc, IWI_CSR_READ_INT, IWI_READ_INT_INIT_HOST);
/* wait for clock stabilization */
for (ntries = 0; ntries < 1000; ntries++) {
if (CSR_READ_4(sc, IWI_CSR_CTL) & IWI_CTL_CLOCK_READY)
break;
DELAY(200);
}
if (ntries == 1000) {
device_printf(sc->sc_dev,
"timeout waiting for clock stabilization\n");
return EIO;
}
tmp = CSR_READ_4(sc, IWI_CSR_RST);
CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_SOFT_RESET);
DELAY(10);
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT);
/* clear NIC memory */
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0);
for (i = 0; i < 0xc000; i++)
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0);
return 0;
}
static const struct iwi_firmware_ohdr *
iwi_setup_ofw(struct iwi_softc *sc, struct iwi_fw *fw)
{
struct firmware *fp = fw->fp;
const struct iwi_firmware_ohdr *hdr;
if (fp->datasize < sizeof (struct iwi_firmware_ohdr)) {
device_printf(sc->sc_dev, "image '%s' too small\n", fp->name);
return NULL;
}
hdr = (const struct iwi_firmware_ohdr *)fp->data;
if ((IWI_FW_GET_MAJOR(le32toh(hdr->version)) != IWI_FW_REQ_MAJOR) ||
(IWI_FW_GET_MINOR(le32toh(hdr->version)) != IWI_FW_REQ_MINOR)) {
device_printf(sc->sc_dev, "version for '%s' %d.%d != %d.%d\n",
fp->name, IWI_FW_GET_MAJOR(le32toh(hdr->version)),
IWI_FW_GET_MINOR(le32toh(hdr->version)), IWI_FW_REQ_MAJOR,
IWI_FW_REQ_MINOR);
return NULL;
}
fw->data = ((const char *) fp->data) + sizeof(struct iwi_firmware_ohdr);
fw->size = fp->datasize - sizeof(struct iwi_firmware_ohdr);
fw->name = fp->name;
return hdr;
}
static const struct iwi_firmware_ohdr *
iwi_setup_oucode(struct iwi_softc *sc, struct iwi_fw *fw)
{
const struct iwi_firmware_ohdr *hdr;
hdr = iwi_setup_ofw(sc, fw);
if (hdr != NULL && le32toh(hdr->mode) != IWI_FW_MODE_UCODE) {
device_printf(sc->sc_dev, "%s is not a ucode image\n",
fw->name);
hdr = NULL;
}
return hdr;
}
static void
iwi_getfw(struct iwi_fw *fw, const char *fwname,
struct iwi_fw *uc, const char *ucname)
{
if (fw->fp == NULL)
fw->fp = firmware_get(fwname);
/* NB: pre-3.0 ucode is packaged separately */
if (uc->fp == NULL && fw->fp != NULL && fw->fp->version < 300)
uc->fp = firmware_get(ucname);
}
/*
* Get the required firmware images if not already loaded.
* Note that we hold firmware images so long as the device
* is marked up in case we need to reload them on device init.
* This is necessary because we re-init the device sometimes
* from a context where we cannot read from the filesystem
* (e.g. from the taskqueue thread when rfkill is re-enabled).
*
* NB: the order of get'ing and put'ing images here is
* intentional to support handling firmware images bundled
* by operating mode and/or all together in one file with
* the boot firmware as "master".
*/
static int
iwi_get_firmware(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
const struct iwi_firmware_hdr *hdr;
struct firmware *fp;
/* invalidate cached firmware on mode change */
if (sc->fw_mode != ic->ic_opmode)
iwi_put_firmware(sc);
switch (ic->ic_opmode) {
case IEEE80211_M_STA:
iwi_getfw(&sc->fw_fw, "iwi_bss", &sc->fw_uc, "iwi_ucode_bss");
break;
case IEEE80211_M_IBSS:
iwi_getfw(&sc->fw_fw, "iwi_ibss", &sc->fw_uc, "iwi_ucode_ibss");
break;
case IEEE80211_M_MONITOR:
iwi_getfw(&sc->fw_fw, "iwi_monitor",
&sc->fw_uc, "iwi_ucode_monitor");
break;
default:
break;
}
fp = sc->fw_fw.fp;
if (fp == NULL) {
device_printf(sc->sc_dev, "could not load firmware\n");
goto bad;
}
if (fp->version < 300) {
/*
* Firmware prior to 3.0 was packaged as separate
* boot, firmware, and ucode images. Verify the
* ucode image was read in, retrieve the boot image
* if needed, and check version stamps for consistency.
* The version stamps in the data are also checked
* above; this is a bit paranoid but is a cheap
* safeguard against mis-packaging.
*/
if (sc->fw_uc.fp == NULL) {
device_printf(sc->sc_dev, "could not load ucode\n");
goto bad;
}
if (sc->fw_boot.fp == NULL) {
sc->fw_boot.fp = firmware_get("iwi_boot");
if (sc->fw_boot.fp == NULL) {
device_printf(sc->sc_dev,
"could not load boot firmware\n");
goto bad;
}
}
if (sc->fw_boot.fp->version != sc->fw_fw.fp->version ||
sc->fw_boot.fp->version != sc->fw_uc.fp->version) {
device_printf(sc->sc_dev,
"firmware version mismatch: "
"'%s' is %d, '%s' is %d, '%s' is %d\n",
sc->fw_boot.fp->name, sc->fw_boot.fp->version,
sc->fw_uc.fp->name, sc->fw_uc.fp->version,
sc->fw_fw.fp->name, sc->fw_fw.fp->version
);
goto bad;
}
/*
* Check and setup each image.
*/
if (iwi_setup_oucode(sc, &sc->fw_uc) == NULL ||
iwi_setup_ofw(sc, &sc->fw_boot) == NULL ||
iwi_setup_ofw(sc, &sc->fw_fw) == NULL)
goto bad;
} else {
/*
* Check and setup combined image.
*/
if (fp->datasize < sizeof(hdr)) {
device_printf(sc->sc_dev, "image '%s' too small\n",
fp->name);
goto bad;
}
hdr = (const struct iwi_firmware_hdr *)fp->data;
if (fp->datasize < sizeof(*hdr) + hdr->bsize + hdr->usize + hdr->fsize) {
device_printf(sc->sc_dev, "image '%s' too small (2)\n",
fp->name);
goto bad;
}
sc->fw_boot.data = ((const char *) fp->data) + sizeof(*hdr);
sc->fw_boot.size = hdr->bsize;
sc->fw_boot.name = fp->name;
sc->fw_uc.data = sc->fw_boot.data + sc->fw_boot.size;
sc->fw_uc.size = hdr->usize;
sc->fw_uc.name = fp->name;
sc->fw_fw.data = sc->fw_uc.data + sc->fw_uc.size;
sc->fw_fw.size = hdr->fsize;
sc->fw_fw.name = fp->name;
}
sc->fw_mode = ic->ic_opmode;
return 1;
bad:
iwi_put_firmware(sc);
return 0;
}
static void
iwi_put_fw(struct iwi_fw *fw)
{
if (fw->fp != NULL) {
firmware_put(fw->fp, FIRMWARE_UNLOAD);
fw->fp = NULL;
}
fw->data = NULL;
fw->size = 0;
fw->name = NULL;
}
/*
* Release any cached firmware images.
*/
static void
iwi_put_firmware(struct iwi_softc *sc)
{
iwi_put_fw(&sc->fw_uc);
iwi_put_fw(&sc->fw_fw);
iwi_put_fw(&sc->fw_boot);
}
static int
iwi_load_ucode(struct iwi_softc *sc, const struct iwi_fw *fw)
{
uint32_t tmp;
const uint16_t *w;
const char *uc = fw->data;
size_t size = fw->size;
int i, ntries, error;
error = 0;
CSR_WRITE_4(sc, IWI_CSR_RST, CSR_READ_4(sc, IWI_CSR_RST) |
IWI_RST_STOP_MASTER);
for (ntries = 0; ntries < 5; ntries++) {
if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED)
break;
DELAY(10);
}
if (ntries == 5) {
device_printf(sc->sc_dev, "timeout waiting for master\n");
error = EIO;
goto fail;
}
MEM_WRITE_4(sc, 0x3000e0, 0x80000000);
DELAY(5000);
tmp = CSR_READ_4(sc, IWI_CSR_RST);
tmp &= ~IWI_RST_PRINCETON_RESET;
CSR_WRITE_4(sc, IWI_CSR_RST, tmp);
DELAY(5000);
MEM_WRITE_4(sc, 0x3000e0, 0);
DELAY(1000);
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 1);
DELAY(1000);
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 0);
DELAY(1000);
MEM_WRITE_1(sc, 0x200000, 0x00);
MEM_WRITE_1(sc, 0x200000, 0x40);
DELAY(1000);
/* write microcode into adapter memory */
for (w = (const uint16_t *)uc; size > 0; w++, size -= 2)
MEM_WRITE_2(sc, 0x200010, htole16(*w));
MEM_WRITE_1(sc, 0x200000, 0x00);
MEM_WRITE_1(sc, 0x200000, 0x80);
/* wait until we get an answer */
for (ntries = 0; ntries < 100; ntries++) {
if (MEM_READ_1(sc, 0x200000) & 1)
break;
DELAY(100);
}
if (ntries == 100) {
device_printf(sc->sc_dev,
"timeout waiting for ucode to initialize\n");
error = EIO;
goto fail;
}
/* read the answer or the firmware will not initialize properly */
for (i = 0; i < 7; i++)
MEM_READ_4(sc, 0x200004);
MEM_WRITE_1(sc, 0x200000, 0x00);
fail:
return error;
}
/* macro to handle unaligned little endian data in firmware image */
#define GETLE32(p) ((p)[0] | (p)[1] << 8 | (p)[2] << 16 | (p)[3] << 24)
static int
iwi_load_firmware(struct iwi_softc *sc, const struct iwi_fw *fw)
{
u_char *p, *end;
uint32_t sentinel, ctl, src, dst, sum, len, mlen, tmp;
int ntries, error;
/* copy firmware image to DMA memory */
memcpy(sc->fw_virtaddr, fw->data, fw->size);
/* make sure the adapter will get up-to-date values */
bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_PREWRITE);
/* tell the adapter where the command blocks are stored */
MEM_WRITE_4(sc, 0x3000a0, 0x27000);
/*
* Store command blocks into adapter's internal memory using register
* indirections. The adapter will read the firmware image through DMA
* using information stored in command blocks.
*/
src = sc->fw_physaddr;
p = sc->fw_virtaddr;
end = p + fw->size;
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0x27000);
while (p < end) {
dst = GETLE32(p); p += 4; src += 4;
len = GETLE32(p); p += 4; src += 4;
p += len;
while (len > 0) {
mlen = min(len, IWI_CB_MAXDATALEN);
ctl = IWI_CB_DEFAULT_CTL | mlen;
sum = ctl ^ src ^ dst;
/* write a command block */
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, ctl);
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, src);
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, dst);
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, sum);
src += mlen;
dst += mlen;
len -= mlen;
}
}
/* write a fictive final command block (sentinel) */
sentinel = CSR_READ_4(sc, IWI_CSR_AUTOINC_ADDR);
CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0);
tmp = CSR_READ_4(sc, IWI_CSR_RST);
tmp &= ~(IWI_RST_MASTER_DISABLED | IWI_RST_STOP_MASTER);
CSR_WRITE_4(sc, IWI_CSR_RST, tmp);
/* tell the adapter to start processing command blocks */
MEM_WRITE_4(sc, 0x3000a4, 0x540100);
/* wait until the adapter reaches the sentinel */
for (ntries = 0; ntries < 400; ntries++) {
if (MEM_READ_4(sc, 0x3000d0) >= sentinel)
break;
DELAY(100);
}
if (ntries == 400) {
device_printf(sc->sc_dev,
"timeout processing command blocks for %s firmware\n",
fw->name);
error = EIO;
goto fail5;
}
/* we're done with command blocks processing */
MEM_WRITE_4(sc, 0x3000a4, 0x540c00);
/* allow interrupts so we know when the firmware is ready */
CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, IWI_INTR_MASK);
/* tell the adapter to initialize the firmware */
CSR_WRITE_4(sc, IWI_CSR_RST, 0);
tmp = CSR_READ_4(sc, IWI_CSR_CTL);
CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_ALLOW_STANDBY);
/* wait at most one second for firmware initialization to complete */
if ((error = msleep(sc, &sc->sc_mtx, 0, "iwiinit", hz)) != 0) {
device_printf(sc->sc_dev, "timeout waiting for %s firmware "
"initialization to complete\n", fw->name);
}
fail5:
return error;
}
static int
iwi_setpowermode(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
uint32_t data;
if (ic->ic_flags & IEEE80211_F_PMGTON) {
/* XXX set more fine-grained operation */
data = htole32(IWI_POWER_MODE_MAX);
} else
data = htole32(IWI_POWER_MODE_CAM);
DPRINTF(("Setting power mode to %u\n", le32toh(data)));
return iwi_cmd(sc, IWI_CMD_SET_POWER_MODE, &data, sizeof data);
}
static int
iwi_setwepkeys(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct iwi_wep_key wepkey;
struct ieee80211_key *wk;
int error, i;
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
wk = &ic->ic_crypto.cs_nw_keys[i];
wepkey.cmd = IWI_WEP_KEY_CMD_SETKEY;
wepkey.idx = i;
wepkey.len = wk->wk_keylen;
memset(wepkey.key, 0, sizeof wepkey.key);
memcpy(wepkey.key, wk->wk_key, wk->wk_keylen);
DPRINTF(("Setting wep key index %u len %u\n", wepkey.idx,
wepkey.len));
error = iwi_cmd(sc, IWI_CMD_SET_WEP_KEY, &wepkey,
sizeof wepkey);
if (error != 0)
return error;
}
return 0;
}
static int
iwi_config(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct iwi_configuration config;
struct iwi_rateset rs;
struct iwi_txpower power;
uint32_t data;
int error, i;
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
DPRINTF(("Setting MAC address to %6D\n", ic->ic_myaddr, ":"));
error = iwi_cmd(sc, IWI_CMD_SET_MAC_ADDRESS, ic->ic_myaddr,
IEEE80211_ADDR_LEN);
if (error != 0)
return error;
memset(&config, 0, sizeof config);
config.bluetooth_coexistence = sc->bluetooth;
config.silence_threshold = 0x1e;
config.antenna = sc->antenna;
config.multicast_enabled = 1;
config.answer_pbreq = (ic->ic_opmode == IEEE80211_M_IBSS) ? 1 : 0;
config.disable_unicast_decryption = 1;
config.disable_multicast_decryption = 1;
DPRINTF(("Configuring adapter\n"));
error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config);
if (error != 0)
return error;
error = iwi_setpowermode(sc);
if (error != 0)
return error;
data = htole32(ic->ic_rtsthreshold);
DPRINTF(("Setting RTS threshold to %u\n", le32toh(data)));
error = iwi_cmd(sc, IWI_CMD_SET_RTS_THRESHOLD, &data, sizeof data);
if (error != 0)
return error;
data = htole32(ic->ic_fragthreshold);
DPRINTF(("Setting fragmentation threshold to %u\n", le32toh(data)));
error = iwi_cmd(sc, IWI_CMD_SET_FRAG_THRESHOLD, &data, sizeof data);
if (error != 0)
return error;
if (ic->ic_opmode == IEEE80211_M_IBSS) {
power.mode = IWI_MODE_11B;
power.nchan = 11;
for (i = 0; i < 11; i++) {
power.chan[i].chan = i + 1;
power.chan[i].power = IWI_TXPOWER_MAX;
}
DPRINTF(("Setting .11b channels tx power\n"));
error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power);
if (error != 0)
return error;
power.mode = IWI_MODE_11G;
DPRINTF(("Setting .11g channels tx power\n"));
error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power);
if (error != 0)
return error;
}
rs.mode = IWI_MODE_11G;
rs.type = IWI_RATESET_TYPE_SUPPORTED;
rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11G].rs_nrates;
memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11G].rs_rates,
rs.nrates);
DPRINTF(("Setting .11bg supported rates (%u)\n", rs.nrates));
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
if (error != 0)
return error;
rs.mode = IWI_MODE_11A;
rs.type = IWI_RATESET_TYPE_SUPPORTED;
rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11A].rs_nrates;
memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11A].rs_rates,
rs.nrates);
DPRINTF(("Setting .11a supported rates (%u)\n", rs.nrates));
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
if (error != 0)
return error;
/* if we have a desired ESSID, set it now */
if (ic->ic_des_esslen != 0) {
#ifdef IWI_DEBUG
if (iwi_debug > 0) {
printf("Setting desired ESSID to ");
ieee80211_print_essid(ic->ic_des_essid,
ic->ic_des_esslen);
printf("\n");
}
#endif
error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ic->ic_des_essid,
ic->ic_des_esslen);
if (error != 0)
return error;
}
data = htole32(arc4random());
DPRINTF(("Setting initialization vector to %u\n", le32toh(data)));
error = iwi_cmd(sc, IWI_CMD_SET_IV, &data, sizeof data);
if (error != 0)
return error;
error = iwi_setwepkeys(sc);
if (error != 0)
return error;
/* enable adapter */
DPRINTF(("Enabling adapter\n"));
return iwi_cmd(sc, IWI_CMD_ENABLE, NULL, 0);
}
static __inline void
set_scan_type(struct iwi_scan_ext *scan, int ix, int scan_type)
{
uint8_t *st = &scan->scan_type[ix / 2];
if (ix % 2)
*st = (*st & 0xf0) | ((scan_type & 0xf) << 0);
else
*st = (*st & 0x0f) | ((scan_type & 0xf) << 4);
}
static int
iwi_scan(struct iwi_softc *sc)
{
#define IEEE80211_MODE_5GHZ (1<<IEEE80211_MODE_11A)
#define IEEE80211_MODE_2GHZ ((1<<IEEE80211_MODE_11B)|1<<IEEE80211_MODE_11G)
struct ieee80211com *ic = &sc->sc_ic;
const struct ieee80211_channel *c;
struct iwi_scan_ext scan;
int i, ix, start, scan_type;
memset(&scan, 0, sizeof scan);
/* XXX different dwell times for different scan types */
scan.dwell_time[IWI_SCAN_TYPE_PASSIVE] = htole16(sc->dwelltime);
scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(sc->dwelltime);
scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(sc->dwelltime);
scan.full_scan_index = htole32(ic->ic_scan.nt_scangen);
scan_type = (ic->ic_des_esslen != 0) ? IWI_SCAN_TYPE_BDIRECTED :
IWI_SCAN_TYPE_BROADCAST;
ix = 0;
if (ic->ic_modecaps & IEEE80211_MODE_5GHZ) {
start = ix;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
/*
* NB: ieee80211_next_scan clears curchan from the
* channel list so we must explicitly check; this
* will be fixed when the new scanning support arrives.
*/
if (!IEEE80211_IS_CHAN_5GHZ(c) ||
!(isset(ic->ic_chan_scan,i) || c == ic->ic_curchan))
continue;
ix++;
scan.channels[ix] = i;
if (c->ic_flags & IEEE80211_CHAN_PASSIVE)
set_scan_type(&scan, ix, IWI_SCAN_TYPE_PASSIVE);
else
set_scan_type(&scan, ix, scan_type);
}
if (start != ix) {
scan.channels[start] = IWI_CHAN_5GHZ | (ix - start);
ix++;
}
}
if (ic->ic_modecaps & IEEE80211_MODE_2GHZ) {
start = ix;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
/* NB: see above */
if (!IEEE80211_IS_CHAN_2GHZ(c) ||
!(isset(ic->ic_chan_scan,i) || c == ic->ic_curchan))
continue;
ix++;
scan.channels[ix] = i;
if (c->ic_flags & IEEE80211_CHAN_PASSIVE)
set_scan_type(&scan, ix, IWI_SCAN_TYPE_PASSIVE);
else
set_scan_type(&scan, ix, scan_type);
}
if (start != ix)
scan.channels[start] = IWI_CHAN_2GHZ | (ix - start);
}
DPRINTF(("Start scanning\n"));
/*
* With 100ms/channel dwell time and a max of ~20 channels
* 5 seconds may be too tight; leave a bit more slack.
*/
sc->sc_scan_timer = 7; /* seconds to complete */
sc->sc_ifp->if_timer = 1;
sc->flags |= IWI_FLAG_SCANNING;
return iwi_cmd(sc, IWI_CMD_SCAN_EXT, &scan, sizeof scan);
#undef IEEE80211_MODE_5GHZ
#undef IEEE80211_MODE_2GHZ
}
static void
iwi_scanabort(void *arg, int npending)
{
struct iwi_softc *sc = arg;
IWI_LOCK_DECL;
IWI_LOCK(sc);
/* NB: make sure we're still scanning */
if (sc->flags & IWI_FLAG_SCANNING)
iwi_cmd(sc, IWI_CMD_ABORT_SCAN, NULL, 0);
IWI_UNLOCK(sc);
}
static void
iwi_scanstart(void *arg, int npending)
{
struct iwi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
IWI_LOCK_DECL;
IWI_LOCK(sc);
/*
* Tell the card to kick off a scan. We guard this
* by checking IWI_FLAG_SCANNING as otherwise we'll
* do this twice because ieee80211_begin_scan will
* immediately call us back to scan the first channel
* in the list.
*/
if (sc->flags & IWI_FLAG_SCANNING) {
ieee80211_begin_scan(ic, 1);
if (iwi_scan(sc) != 0) {
/* XXX should not happen */
sc->flags &= ~IWI_FLAG_SCANNING;
ieee80211_new_state(ic, IEEE80211_S_INIT, 0);
}
}
IWI_UNLOCK(sc);
}
static void
iwi_scandone(void *arg, int npending)
{
struct iwi_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
IWI_LOCK_DECL;
IWI_LOCK(sc);
if (sc->flags & IWI_FLAG_ASSOCIATED)
iwi_disassociate(sc, 0);
ieee80211_end_scan(ic);
IWI_UNLOCK(sc);
}
/*
* Set the current channel by doing a passive scan. Note this
* is explicitly for monitor mode operation; do not use it for
* anything else (sigh).
*/
static void
iwi_scanchan(void *arg, int npending)
{
struct iwi_softc *sc = arg;
struct ieee80211com *ic;
struct ieee80211_channel *chan;
struct iwi_scan_ext scan;
IWI_LOCK_DECL;
IWI_LOCK(sc);
ic = &sc->sc_ic;
KASSERT(ic->ic_opmode == IEEE80211_M_MONITOR,
("opmode %u", ic->ic_opmode));
chan = ic->ic_ibss_chan;
memset(&scan, 0, sizeof scan);
/*
* Set the dwell time to a fairly small value. The firmware
* is prone to crash when aborting a scan so it's better to
* let a scan complete before changing channels--such as when
* channel hopping in monitor mode.
*/
scan.dwell_time[IWI_SCAN_TYPE_PASSIVE] = htole16(2000);
scan.full_scan_index = htole32(ic->ic_scan.nt_scangen);
if (IEEE80211_IS_CHAN_5GHZ(chan))
scan.channels[0] = 1 | IWI_CHAN_5GHZ;
else
scan.channels[0] = 1 | IWI_CHAN_2GHZ;
scan.channels[1] = ieee80211_chan2ieee(ic, chan);
set_scan_type(&scan, 1, IWI_SCAN_TYPE_PASSIVE);
DPRINTF(("Setting channel to %u\n", ieee80211_chan2ieee(ic, chan)));
sc->flags |= IWI_FLAG_SCANNING;
(void) iwi_cmd(sc, IWI_CMD_SCAN_EXT, &scan, sizeof scan);
IWI_UNLOCK(sc);
}
static int
iwi_set_sensitivity(struct iwi_softc *sc, int8_t rssi_dbm)
{
struct iwi_sensitivity sens;
DPRINTF(("Setting sensitivity to %d\n", rssi_dbm));
memset(&sens, 0, sizeof sens);
sens.rssi = htole16(rssi_dbm);
return iwi_cmd(sc, IWI_CMD_SET_SENSITIVITY, &sens, sizeof sens);
}
static int
iwi_auth_and_assoc(struct iwi_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_node *ni = ic->ic_bss;
struct iwi_configuration config;
struct iwi_associate *assoc = &sc->assoc;
struct iwi_rateset rs;
uint16_t capinfo;
int error;
if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) {
memset(&config, 0, sizeof config);
config.bluetooth_coexistence = sc->bluetooth;
config.antenna = sc->antenna;
config.multicast_enabled = 1;
config.use_protection = 1;
config.answer_pbreq =
(ic->ic_opmode == IEEE80211_M_IBSS) ? 1 : 0;
config.disable_unicast_decryption = 1;
config.disable_multicast_decryption = 1;
DPRINTF(("Configuring adapter\n"));
error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config);
if (error != 0)
return error;
}
#ifdef IWI_DEBUG
if (iwi_debug > 0) {
printf("Setting ESSID to ");
ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
printf("\n");
}
#endif
error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ni->ni_essid, ni->ni_esslen);
if (error != 0)
return error;
/* the rate set has already been "negotiated" */
rs.mode = IEEE80211_IS_CHAN_5GHZ(ni->ni_chan) ? IWI_MODE_11A :
IWI_MODE_11G;
rs.type = IWI_RATESET_TYPE_NEGOTIATED;
rs.nrates = ni->ni_rates.rs_nrates;
memcpy(rs.rates, ni->ni_rates.rs_rates, rs.nrates);
DPRINTF(("Setting negotiated rates (%u)\n", rs.nrates));
error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs);
if (error != 0)
return error;
memset(assoc, 0, sizeof *assoc);
if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_wme_ie != NULL) {
/* NB: don't treat WME setup as failure */
if (iwi_wme_setparams_locked(sc) == 0 && iwi_wme_setie(sc) == 0)
assoc->policy |= htole16(IWI_POLICY_WME);
/* XXX complain on failure? */
}
if (ic->ic_opt_ie != NULL) {
DPRINTF(("Setting optional IE (len=%u)\n", ic->ic_opt_ie_len));
error = iwi_cmd(sc, IWI_CMD_SET_OPTIE, ic->ic_opt_ie,
ic->ic_opt_ie_len);
if (error != 0)
return error;
}
error = iwi_set_sensitivity(sc, ni->ni_rssi);
if (error != 0)
return error;
if (IEEE80211_IS_CHAN_A(ni->ni_chan))
assoc->mode = IWI_MODE_11A;
else if (IEEE80211_IS_CHAN_G(ni->ni_chan))
assoc->mode = IWI_MODE_11G;
else if (IEEE80211_IS_CHAN_B(ni->ni_chan))
assoc->mode = IWI_MODE_11B;
/* XXX else error */
assoc->chan = ieee80211_chan2ieee(ic, ni->ni_chan);
/*
* NB: do not arrange for shared key auth w/o privacy
* (i.e. a wep key); it causes a firmware error.
*/
if ((ic->ic_flags & IEEE80211_F_PRIVACY) &&
ni->ni_authmode == IEEE80211_AUTH_SHARED) {
assoc->auth = IWI_AUTH_SHARED;
/*
* It's possible to have privacy marked but no default
* key setup. This typically is due to a user app bug
* but if we blindly grab the key the firmware will
* barf so avoid it for now.
*/
if (ic->ic_crypto.cs_def_txkey != IEEE80211_KEYIX_NONE)
assoc->auth |= ic->ic_crypto.cs_def_txkey << 4;
error = iwi_setwepkeys(sc);
if (error != 0)
return error;
}
if (ic->ic_flags & IEEE80211_F_WPA)
assoc->policy |= htole16(IWI_POLICY_WPA);
if (ic->ic_opmode == IEEE80211_M_IBSS && ni->ni_tstamp.tsf == 0)
assoc->type = IWI_HC_IBSS_START;
else
assoc->type = IWI_HC_ASSOC;
memcpy(assoc->tstamp, ni->ni_tstamp.data, 8);
if (ic->ic_opmode == IEEE80211_M_IBSS)
capinfo = IEEE80211_CAPINFO_IBSS;
else
capinfo = IEEE80211_CAPINFO_ESS;
if (ic->ic_flags & IEEE80211_F_PRIVACY)
capinfo |= IEEE80211_CAPINFO_PRIVACY;
if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) &&
IEEE80211_IS_CHAN_2GHZ(ni->ni_chan))
capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE;
if (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)
capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME;
assoc->capinfo = htole16(capinfo);
assoc->lintval = htole16(ic->ic_lintval);
assoc->intval = htole16(ni->ni_intval);
IEEE80211_ADDR_COPY(assoc->bssid, ni->ni_bssid);
if (ic->ic_opmode == IEEE80211_M_IBSS)
IEEE80211_ADDR_COPY(assoc->dst, ifp->if_broadcastaddr);
else
IEEE80211_ADDR_COPY(assoc->dst, ni->ni_bssid);
DPRINTF(("%s bssid %6D dst %6D channel %u policy 0x%x "
"auth %u capinfo 0x%x lintval %u bintval %u\n",
assoc->type == IWI_HC_IBSS_START ? "Start" : "Join",
assoc->bssid, ":", assoc->dst, ":",
assoc->chan, le16toh(assoc->policy), assoc->auth,
le16toh(assoc->capinfo), le16toh(assoc->lintval),
le16toh(assoc->intval)));
return iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc);
}
static int
iwi_disassociate(struct iwi_softc *sc, int quiet)
{
struct iwi_associate *assoc = &sc->assoc;
if (quiet)
assoc->type = IWI_HC_DISASSOC_QUIET;
else
assoc->type = IWI_HC_DISASSOC;
DPRINTF(("Trying to disassociate from %6D channel %u\n",
assoc->bssid, ":", assoc->chan));
return iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc);
}
static void
iwi_down(void *arg, int npending)
{
struct iwi_softc *sc = arg;
IWI_LOCK_DECL;
IWI_LOCK(sc);
iwi_disassociate(sc, 0);
IWI_UNLOCK(sc);
}
static void
iwi_init(void *priv)
{
struct iwi_softc *sc = priv;
IWI_LOCK_DECL;
IWI_LOCK(sc);
iwi_init_locked(sc, 0);
IWI_UNLOCK(sc);
}
static void
iwi_init_locked(void *priv, int force)
{
struct iwi_softc *sc = priv;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
struct iwi_rx_data *data;
int i;
IWI_LOCK_DECL;
if (sc->flags & IWI_FLAG_FW_LOADING)
return; /* XXX: condvar? */
iwi_stop(sc);
if (iwi_reset(sc) != 0) {
device_printf(sc->sc_dev, "could not reset adapter\n");
goto fail;
}
sc->flags |= IWI_FLAG_FW_LOADING;
IWI_UNLOCK(sc);
if (!iwi_get_firmware(sc)) {
IWI_LOCK(sc);
goto fail;
}
/* allocate DMA memory for mapping firmware image */
if (sc->fw_boot.size > sc->fw_dma_size)
sc->fw_dma_size = sc->fw_boot.size;
if (sc->fw_fw.size > sc->fw_dma_size)
sc->fw_dma_size = sc->fw_fw.size;
if (sc->fw_uc.size > sc->fw_dma_size)
sc->fw_dma_size = sc->fw_uc.size;
if (bus_dma_tag_create(NULL, 4, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL, sc->fw_dma_size, 1, sc->fw_dma_size,
0, NULL, NULL, &sc->fw_dmat) != 0) {
device_printf(sc->sc_dev,
"could not create firmware DMA tag\n");
IWI_LOCK(sc);
goto fail;
}
if (bus_dmamem_alloc(sc->fw_dmat, &sc->fw_virtaddr, 0,
&sc->fw_map) != 0) {
device_printf(sc->sc_dev,
"could not allocate firmware DMA memory\n");
IWI_LOCK(sc);
goto fail2;
}
if (bus_dmamap_load(sc->fw_dmat, sc->fw_map, sc->fw_virtaddr,
sc->fw_dma_size, iwi_dma_map_addr, &sc->fw_physaddr, 0) != 0) {
device_printf(sc->sc_dev, "could not load firmware DMA map\n");
IWI_LOCK(sc);
goto fail3;
}
IWI_LOCK(sc);
if (iwi_load_firmware(sc, &sc->fw_boot) != 0) {
device_printf(sc->sc_dev,
"could not load boot firmware %s\n", sc->fw_boot.name);
goto fail4;
}
if (iwi_load_ucode(sc, &sc->fw_uc) != 0) {
device_printf(sc->sc_dev,
"could not load microcode %s\n", sc->fw_uc.name);
goto fail4;
}
iwi_stop_master(sc);
CSR_WRITE_4(sc, IWI_CSR_CMD_BASE, sc->cmdq.physaddr);
CSR_WRITE_4(sc, IWI_CSR_CMD_SIZE, sc->cmdq.count);
CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur);
CSR_WRITE_4(sc, IWI_CSR_TX1_BASE, sc->txq[0].physaddr);
CSR_WRITE_4(sc, IWI_CSR_TX1_SIZE, sc->txq[0].count);
CSR_WRITE_4(sc, IWI_CSR_TX1_WIDX, sc->txq[0].cur);
CSR_WRITE_4(sc, IWI_CSR_TX2_BASE, sc->txq[1].physaddr);
CSR_WRITE_4(sc, IWI_CSR_TX2_SIZE, sc->txq[1].count);
CSR_WRITE_4(sc, IWI_CSR_TX2_WIDX, sc->txq[1].cur);
CSR_WRITE_4(sc, IWI_CSR_TX3_BASE, sc->txq[2].physaddr);
CSR_WRITE_4(sc, IWI_CSR_TX3_SIZE, sc->txq[2].count);
CSR_WRITE_4(sc, IWI_CSR_TX3_WIDX, sc->txq[2].cur);
CSR_WRITE_4(sc, IWI_CSR_TX4_BASE, sc->txq[3].physaddr);
CSR_WRITE_4(sc, IWI_CSR_TX4_SIZE, sc->txq[3].count);
CSR_WRITE_4(sc, IWI_CSR_TX4_WIDX, sc->txq[3].cur);
for (i = 0; i < sc->rxq.count; i++) {
data = &sc->rxq.data[i];
CSR_WRITE_4(sc, data->reg, data->physaddr);
}
CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, sc->rxq.count - 1);
if (iwi_load_firmware(sc, &sc->fw_fw) != 0) {
device_printf(sc->sc_dev,
"could not load main firmware %s\n", sc->fw_fw.name);
goto fail4;
}
sc->flags |= IWI_FLAG_FW_INITED;
bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->fw_dmat, sc->fw_map);
bus_dmamem_free(sc->fw_dmat, sc->fw_virtaddr, sc->fw_map);
bus_dma_tag_destroy(sc->fw_dmat);
if (iwi_config(sc) != 0) {
device_printf(sc->sc_dev, "device configuration failed\n");
goto fail;
}
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
/*
* NB: When restarting the adapter clock the state
* machine regardless of the roaming mode; otherwise
* we need to notify user apps so they can manually
* get us going again.
*/
if (ic->ic_roaming != IEEE80211_ROAMING_MANUAL || force)
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
} else
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
sc->flags &= ~IWI_FLAG_FW_LOADING;
return;
fail4: bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->fw_dmat, sc->fw_map);
fail3: bus_dmamem_free(sc->fw_dmat, sc->fw_virtaddr, sc->fw_map);
fail2: bus_dma_tag_destroy(sc->fw_dmat);
fail: ifp->if_flags &= ~IFF_UP;
sc->flags &= ~IWI_FLAG_FW_LOADING;
iwi_stop(sc);
iwi_put_firmware(sc);
}
static void
iwi_stop(void *priv)
{
struct iwi_softc *sc = priv;
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = ic->ic_ifp;
if (sc->sc_softled) {
callout_stop(&sc->sc_ledtimer);
sc->sc_blinking = 0;
}
iwi_stop_master(sc);
CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_SOFT_RESET);
/* reset rings */
iwi_reset_cmd_ring(sc, &sc->cmdq);
iwi_reset_tx_ring(sc, &sc->txq[0]);
iwi_reset_tx_ring(sc, &sc->txq[1]);
iwi_reset_tx_ring(sc, &sc->txq[2]);
iwi_reset_tx_ring(sc, &sc->txq[3]);
iwi_reset_rx_ring(sc, &sc->rxq);
ifp->if_timer = 0;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
sc->sc_tx_timer = 0;
sc->sc_rfkill_timer = 0;
sc->sc_scan_timer = 0;
sc->flags &= ~(IWI_FLAG_BUSY | IWI_FLAG_SCANNING | IWI_FLAG_ASSOCIATED);
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
}
static void
iwi_restart(void *arg, int npending)
{
struct iwi_softc *sc = arg;
IWI_LOCK_DECL;
IWI_LOCK(sc);
iwi_init_locked(sc, 1); /* NB: force state machine */
IWI_UNLOCK(sc);
}
/*
* Return whether or not the radio is enabled in hardware
* (i.e. the rfkill switch is "off").
*/
static int
iwi_getrfkill(struct iwi_softc *sc)
{
return (CSR_READ_4(sc, IWI_CSR_IO) & IWI_IO_RADIO_ENABLED) == 0;
}
static void
iwi_radio_on(void *arg, int pending)
{
struct iwi_softc *sc = arg;
device_printf(sc->sc_dev, "radio turned on\n");
iwi_init(sc);
}
static void
iwi_radio_off(void *arg, int pending)
{
struct iwi_softc *sc = arg;
device_printf(sc->sc_dev, "radio turned off\n");
iwi_stop(sc);
sc->sc_rfkill_timer = 2;
sc->sc_ifp->if_timer = 1;
}
static int
iwi_sysctl_stats(SYSCTL_HANDLER_ARGS)
{
struct iwi_softc *sc = arg1;
uint32_t size, buf[128];
if (!(sc->flags & IWI_FLAG_FW_INITED)) {
memset(buf, 0, sizeof buf);
return SYSCTL_OUT(req, buf, sizeof buf);
}
size = min(CSR_READ_4(sc, IWI_CSR_TABLE0_SIZE), 128 - 1);
CSR_READ_REGION_4(sc, IWI_CSR_TABLE0_BASE, &buf[1], size);
return SYSCTL_OUT(req, buf, sizeof buf);
}
static int
iwi_sysctl_radio(SYSCTL_HANDLER_ARGS)
{
struct iwi_softc *sc = arg1;
int val = !iwi_getrfkill(sc);
return SYSCTL_OUT(req, &val, sizeof val);
}
/*
* Add sysctl knobs.
*/
static void
iwi_sysctlattach(struct iwi_softc *sc)
{
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "radio",
CTLTYPE_INT | CTLFLAG_RD, sc, 0, iwi_sysctl_radio, "I",
"radio transmitter switch state (0=off, 1=on)");
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "stats",
CTLTYPE_OPAQUE | CTLFLAG_RD, sc, 0, iwi_sysctl_stats, "S",
"statistics");
sc->dwelltime = 100;
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "dwell",
CTLFLAG_RW, &sc->dwelltime, 0,
"channel dwell time (ms) for AP/station scanning");
sc->bluetooth = 0;
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "bluetooth",
CTLFLAG_RW, &sc->bluetooth, 0, "bluetooth coexistence");
sc->antenna = IWI_ANTENNA_AUTO;
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "antenna",
CTLFLAG_RW, &sc->antenna, 0, "antenna (0=auto)");
}
/*
* LED support.
*
* Different cards have different capabilities. Some have three
* led's while others have only one. The linux ipw driver defines
* led's for link state (associated or not), band (11a, 11g, 11b),
* and for link activity. We use one led and vary the blink rate
* according to the tx/rx traffic a la the ath driver.
*/
static __inline uint32_t
iwi_toggle_event(uint32_t r)
{
return r &~ (IWI_RST_STANDBY | IWI_RST_GATE_ODMA |
IWI_RST_GATE_IDMA | IWI_RST_GATE_ADMA);
}
static uint32_t
iwi_read_event(struct iwi_softc *sc)
{
return MEM_READ_4(sc, IWI_MEM_EEPROM_EVENT);
}
static void
iwi_write_event(struct iwi_softc *sc, uint32_t v)
{
MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, v);
}
static void
iwi_led_done(void *arg)
{
struct iwi_softc *sc = arg;
sc->sc_blinking = 0;
}
/*
* Turn the activity LED off: flip the pin and then set a timer so no
* update will happen for the specified duration.
*/
static void
iwi_led_off(void *arg)
{
struct iwi_softc *sc = arg;
uint32_t v;
v = iwi_read_event(sc);
v &= ~sc->sc_ledpin;
iwi_write_event(sc, iwi_toggle_event(v));
callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, iwi_led_done, sc);
}
/*
* Blink the LED according to the specified on/off times.
*/
static void
iwi_led_blink(struct iwi_softc *sc, int on, int off)
{
uint32_t v;
v = iwi_read_event(sc);
v |= sc->sc_ledpin;
iwi_write_event(sc, iwi_toggle_event(v));
sc->sc_blinking = 1;
sc->sc_ledoff = off;
callout_reset(&sc->sc_ledtimer, on, iwi_led_off, sc);
}
static void
iwi_led_event(struct iwi_softc *sc, int event)
{
#define N(a) (sizeof(a)/sizeof(a[0]))
/* NB: on/off times from the Atheros NDIS driver, w/ permission */
static const struct {
u_int rate; /* tx/rx iwi rate */
u_int16_t timeOn; /* LED on time (ms) */
u_int16_t timeOff; /* LED off time (ms) */
} blinkrates[] = {
{ IWI_RATE_OFDM54, 40, 10 },
{ IWI_RATE_OFDM48, 44, 11 },
{ IWI_RATE_OFDM36, 50, 13 },
{ IWI_RATE_OFDM24, 57, 14 },
{ IWI_RATE_OFDM18, 67, 16 },
{ IWI_RATE_OFDM12, 80, 20 },
{ IWI_RATE_DS11, 100, 25 },
{ IWI_RATE_OFDM9, 133, 34 },
{ IWI_RATE_OFDM6, 160, 40 },
{ IWI_RATE_DS5, 200, 50 },
{ 6, 240, 58 }, /* XXX 3Mb/s if it existed */
{ IWI_RATE_DS2, 267, 66 },
{ IWI_RATE_DS1, 400, 100 },
{ 0, 500, 130 }, /* unknown rate/polling */
};
uint32_t txrate;
int j = 0; /* XXX silence compiler */
sc->sc_ledevent = ticks; /* time of last event */
if (sc->sc_blinking) /* don't interrupt active blink */
return;
switch (event) {
case IWI_LED_POLL:
j = N(blinkrates)-1;
break;
case IWI_LED_TX:
/* read current transmission rate from adapter */
txrate = CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE);
if (blinkrates[sc->sc_txrix].rate != txrate) {
for (j = 0; j < N(blinkrates)-1; j++)
if (blinkrates[j].rate == txrate)
break;
sc->sc_txrix = j;
} else
j = sc->sc_txrix;
break;
case IWI_LED_RX:
if (blinkrates[sc->sc_rxrix].rate != sc->sc_rxrate) {
for (j = 0; j < N(blinkrates)-1; j++)
if (blinkrates[j].rate == sc->sc_rxrate)
break;
sc->sc_rxrix = j;
} else
j = sc->sc_rxrix;
break;
}
/* XXX beware of overflow */
iwi_led_blink(sc, (blinkrates[j].timeOn * hz) / 1000,
(blinkrates[j].timeOff * hz) / 1000);
#undef N
}
static int
iwi_sysctl_softled(SYSCTL_HANDLER_ARGS)
{
struct iwi_softc *sc = arg1;
int softled = sc->sc_softled;
int error;
error = sysctl_handle_int(oidp, &softled, 0, req);
if (error || !req->newptr)
return error;
softled = (softled != 0);
if (softled != sc->sc_softled) {
if (softled) {
uint32_t v = iwi_read_event(sc);
v &= ~sc->sc_ledpin;
iwi_write_event(sc, iwi_toggle_event(v));
}
sc->sc_softled = softled;
}
return 0;
}
static void
iwi_ledattach(struct iwi_softc *sc)
{
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
sc->sc_blinking = 0;
sc->sc_ledstate = 1;
sc->sc_ledidle = (2700*hz)/1000; /* 2.7sec */
callout_init_mtx(&sc->sc_ledtimer, &sc->sc_mtx, 0);
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"softled", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
iwi_sysctl_softled, "I", "enable/disable software LED support");
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"ledpin", CTLFLAG_RW, &sc->sc_ledpin, 0,
"pin setting to turn activity LED on");
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"ledidle", CTLFLAG_RW, &sc->sc_ledidle, 0,
"idle time for inactivity LED (ticks)");
/* XXX for debugging */
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"nictype", CTLFLAG_RD, &sc->sc_nictype, 0,
"NIC type from EEPROM");
sc->sc_ledpin = IWI_RST_LED_ACTIVITY;
sc->sc_softled = 1;
sc->sc_nictype = (iwi_read_prom_word(sc, IWI_EEPROM_NIC) >> 8) & 0xff;
if (sc->sc_nictype == 1) {
/*
* NB: led's are reversed.
*/
sc->sc_ledpin = IWI_RST_LED_ASSOCIATED;
}
}
Reference in New Issue View Git Blame Copy Permalink